- Joined
- Aug 1, 2019
- Messages
- 113
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i9-9900K
- Graphics
- Radeon VII
Question for @CaseySJ regarding the above issue. My Hackintosh was running perfect with full TB3 support for all the devices I've reported working. When trying to setup a particularly complex OBS setup which needed a plugin only available on Windows I decided to install Win 10 on a second NVME. I removed all mac drives as suggested and did a successful Win install. I installed the Blackmagic drivers for my UltraStudio Mini Recorder in Windows and got the OBS setup running.
After setting the boot drive to the UEFI mac drive and booting back into the Mac the TB3 ports were no longer working. What are the steps I should take to troubleshoot? There were no changes to the EFI folder and the ports just don't want to work on the mac side now.
Ok, replying to myself. After reading a bit more I think this might have been a "user error" with a "soft boot" into the Mac side from having been using the Windows side of things. I had not tried turning the power totally off at the PSU.
So, I shutdown and hit the switch on the PSU. Waited a bit and then booted into the Mac side. The TB3 ports were working again. So, with regards to the TB ports, do we need to fully shutdown and turn off power each time we switch between OSes?