Hi x86tosh, now my installation getting stuck at PCI configuration begin and it automatically restarts. I copied all the related files you have posted in that EFI folder except the one in Patched folder. I even copied the files in the origin folder from ACPI. Please helppppppI would make a new USB stick - try a different stick if you have one, triple check the clover setting when you install and make sure you have copied across the .plist and kexts. Make sure you are using the latest Clover.
Worth also trying a different USB socket - plug the stick into a USB2 socket and give it a go from there.
Also Google "Failed getting NVRAM osx86" and just go through any solutions and problems others have had. The first hit is ensuring 'FixOwnership' is set to true (which it is not in Rocket88's plist) so give this a go (use plist edit pro, or clover configurator)
edit: your build says Nvidia gtx 1080 'sli' - if you have 2 graphics cards plugged in then take one out - when installing OSX you want your system to be as barebones as possible.
I'm having exactly the same problems as @d4vv. :'( Halp!
I've build my own DSDT.aml with AIDA64, otherwise using the existing DSDT.aml would get me stuck in the "AMFILoadTrustedKeysFromNVRam: failed getting NVRAM".
I also have a i7-6900K trying to install into a SSD Samsung 850 Pro (SATA).
- I've tried to modify the config.plist in the "VoodooTSCSync.kext" to set the number of cpus to 15.
- I've tried to use the "nv_disable=1"
- I've reset the BIOS using the pins, and loading the optimized configuration.
- I've tried with my Titan X (Pascal) and with an old GTX 680.
And I get stuck with these errors (see image):
ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP08.ARPT._DSM (Node ffffff807d381a50), AE_NOT_FOUND (20140828/psparse-270)
and after showing the: "mbinit: done [128 MB total pool size, (85/42) split]" line for a few seconds, it reboots automatically.
Any tip or direction would be greatly appreciated!
Thanks!
The Rules said:Profiles need to contain at least your primary system to assist others with helping you.
Hi i tink it,s because of DSDT.aml or SSDT.aml its 100% Posibil to boot first just with clover settings without dsdt or ssdt
dsdt and ssdt or very god but just if you have a properly patched one....are you sure its your dsdt correct?