- Joined
- Oct 4, 2016
- Messages
- 6
Hi,
I was trying to install macOS sierra but whatever I do I always end up with the reboot loop in "PCI configuration begin". Here what I have tried so far.
1) Boot args: -v npci=0x2000 dart=0 cpus=1 kext-dev-mode=1 PCIRootUID=1 -x -f nv_disable=1
Boot args: -v npci=0x3000 darkwake=0 dart=0 kext-dev-mode=1 PCIRootUID=0 -x -f nv_disable=1 DSDT=No
( I tried all the boot args that I can find in the internet with different combination no changes)
2) In my motherboard, updates BIOS to latest version(before I update I got error as RTC: Only Single Ram Bank (128 bytes)),
Intel VT, speed step, turbo mode all disabled, SATA controller to AHCI, Intel xHCI mode, EHCI Legacy support, xHCI Hand-off, EHCI Hand-off all enabled, USB 3.1 disabled, Above 4G Decoding enabled and tried with disable as well, CSM disabled, /secure Boot type Other OS, disbaled WiFi, Lan, audio no change at all...
3) Tried these guides
https://www.tonymacx86.com/threads/...clover-guide-100-working.203769/#post-1340570
https://www.tonymacx86.com/threads/...oadwell-e-family-and-haswell-e-family.197513/
4) I even tried without Unibeast, different USB ports no luck
But I didn't try different Clover versions. I tried all the time with Clover_v2.3k_r3786.zip.
My build:
ASUS X99 PRO/USB 3.1 motherboard
Intel Core i7 5820K
16GB RAM
ASUS Nvidia GTX 770
Guys what else I can do? I think I made huge mistake buying this X99 motherboard without do proper research for Hackintosh now suffering
. Anyone know is there any DSDT available for ASUS X99 pro?
Thanks
Krish
I was trying to install macOS sierra but whatever I do I always end up with the reboot loop in "PCI configuration begin". Here what I have tried so far.
1) Boot args: -v npci=0x2000 dart=0 cpus=1 kext-dev-mode=1 PCIRootUID=1 -x -f nv_disable=1
Boot args: -v npci=0x3000 darkwake=0 dart=0 kext-dev-mode=1 PCIRootUID=0 -x -f nv_disable=1 DSDT=No
( I tried all the boot args that I can find in the internet with different combination no changes)
2) In my motherboard, updates BIOS to latest version(before I update I got error as RTC: Only Single Ram Bank (128 bytes)),
Intel VT, speed step, turbo mode all disabled, SATA controller to AHCI, Intel xHCI mode, EHCI Legacy support, xHCI Hand-off, EHCI Hand-off all enabled, USB 3.1 disabled, Above 4G Decoding enabled and tried with disable as well, CSM disabled, /secure Boot type Other OS, disbaled WiFi, Lan, audio no change at all...
3) Tried these guides
https://www.tonymacx86.com/threads/...clover-guide-100-working.203769/#post-1340570
https://www.tonymacx86.com/threads/...oadwell-e-family-and-haswell-e-family.197513/
4) I even tried without Unibeast, different USB ports no luck
But I didn't try different Clover versions. I tried all the time with Clover_v2.3k_r3786.zip.
My build:
ASUS X99 PRO/USB 3.1 motherboard
Intel Core i7 5820K
16GB RAM
ASUS Nvidia GTX 770
Guys what else I can do? I think I made huge mistake buying this X99 motherboard without do proper research for Hackintosh now suffering
. Anyone know is there any DSDT available for ASUS X99 pro?Thanks
Krish