RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,015
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Can i use acpiplatform from my another install.
It depends on whether you replaced it too... Check the version.
Can i use acpiplatform from my another install.
i copied acpiplatform from my friends mac running 10.9.2 it had cf bundle version 2.
so as i rebooted it gave me a kernel panick.
Now i cant boot even in safe mode.
i have a working win 8.1 installed but somehow am not able to use hfs+ to see the mac partition
Yes I would recommend a fresh install. I must have done 3-4 fresh installs setting mine up properly. I'll include a zip with all the essentials. Please note that you specifically need a "Lenovo IdeaPad Y410P" for the DSDT's and SSDTs to work, as far as I know Lenovo has never released a BIOS update so you should be ok. Also, if you are using a HDD with 4k sectors, there is a possibility that you can receive a boot error. I'll post the fix just incase: Fix 4k boot error for Chameleon in recovery:
•Dismount install partition
•In terminal type:
"dd if=/usr/standalone/i386/boot1h of=/dev/disk1s2 bs=4k"
*This is what I experienced and just precautionary.
Just make sure you use kext utility when you install kexts, and until it is working, at least once before power down.