- Joined
- Feb 24, 2013
- Messages
- 2,651
- Motherboard
- N/A
- CPU
- N/A
- Graphics
- N/A
- Mac
- Mobile Phone
So using the EllyBz-iMacPro-GAX299G7- XHCI.kext from the repository results in an issue aside from the USB C back panel not working fully.
New problem is that it wakes from sleep a moment after going to sleep if I have a usb 2.0 device plugged into the back two blue color usb 3.0 connectors right below the two yellow usb 3 connectors
I tried the EllyBz-iMacPro-GAX299G7- XHCI-15port.kext but that resulted in Kernel panic on resume from sleep.
Sleep is a constant issue with Hackintoshes, there really is no perfect answer.
If you plug in a device and macOS sees it, then you have a working XHCI injector.
From my experience, Gigabyte does use a lot of hubs in X299. For example the previous board I had had the rear 4 ports on a single USB3.0 hub.