i7-4930K - Asus Rampage IV Extreme - 32GB RAM - GTX 770 4GB [Success!!]

[jojjoj23]

I have been experiencing random reboots. Sometimes it will happen 30 min post-boot sometimes 2-3 hours. I posted the error report for reference. Ive tried everything short of a new install. If anyone has any insight into this problem it would be greatly appreciated.

Anonymous UUID:       451A522B-C40D-DB3C-E0B6-61AEE8AB1908

Thu Sep 17 13:54:08 2015


*** Panic Report ***
panic(cpu 8 caller 0xffffff801694387b): "thread_invoke: preemption_level 1, possible cause: blocking while holding a spinlock, or within interrupt context"@/SourceCache/xnu/xnu-2782.40.9/osfmk/kern/sched_prim.c:2213
Backtrace (CPU 8), Frame : Return Address
0xffffff83c1dbb710 : 0xffffff801692ad21 
0xffffff83c1dbb790 : 0xffffff801694387b 
0xffffff83c1dbb820 : 0xffffff801694112f 
0xffffff83c1dbb860 : 0xffffff8016a0f0f0 
0xffffff83c1dbb8d0 : 0xffffff8016ea8eec 
0xffffff83c1dbb900 : 0xffffff8016ea8f4f 
0xffffff83c1dbb920 : 0xffffff8016eae780 
0xffffff83c1dbb940 : 0xffffff8016eae7bd 
0xffffff83c1dbb950 : 0xffffff7f97838a75 
0xffffff83c1dbb990 : 0xffffff7f97931314 
0xffffff83c1dbb9e0 : 0xffffff7f978bac70 
0xffffff83c1dbb9f0 : 0xffffff7f9786e24b 
0xffffff83c1dbbcc0 : 0xffffff7f9786e1c7 
0xffffff83c1dbbcf0 : 0xffffff7f97912b72 
0xffffff83c1dbbd20 : 0xffffff7f97912d51 
0xffffff83c1dbbd90 : 0xffffff7f97912901 
0xffffff83c1dbbdd0 : 0xffffff7f9788a309 
0xffffff83c1dbbe20 : 0xffffff7f977c158d 
0xffffff83c1dbbf00 : 0xffffff7f98854a59 
0xffffff83c1dbbf40 : 0xffffff8016ed37cd 
0xffffff83c1dbbf80 : 0xffffff8016ed38c6 
0xffffff83c1dbbfb0 : 0xffffff8016a116e7 
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(720.4.4)[4ED60649-760E-3E91-9C58-322700847C7E]@0xffffff7f977be000->0xffffff7f97822fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[BDA92C3B-AD86-33E5-A7F1-1603465350A7]@0xffffff7f97124000
         net.osx86.kexts.GenericUSBXHCI(1.2.8d9)[00000000-0000-0000-0000-000000000000]@0xffffff7f9884b000->0xffffff7f98862fff
            dependency: com.apple.iokit.IOUSBFamily(720.4.4)[4ED60649-760E-3E91-9C58-322700847C7E]@0xffffff7f977be000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[BDA92C3B-AD86-33E5-A7F1-1603465350A7]@0xffffff7f97124000
         com.realtek.driver.RtWlanU(1827.4)[24DDFA6C-C845-390E-870F-92330196C84E]@0xffffff7f9782f000->0xffffff7f97afafff
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[150D35F0-A5B1-3C6C-803A-A45B70166285]@0xffffff7f9778b000
            dependency: com.apple.iokit.IOUSBFamily(720.4.4)[4ED60649-760E-3E91-9C58-322700847C7E]@0xffffff7f977be000


BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 darkwake=0 npci=0x2000 kext-dev-mode=1 


Mac OS version:
14F27


Kernel version:
Darwin Kernel Version 14.5.0: Wed Jul 29 02:26:53 PDT 2015; root:xnu-2782.40.9~1/RELEASE_X86_64
Kernel UUID: 58F06365-45C7-3CA7-B80D-173AFD1A03C4
Kernel slide:     0x0000000016600000
Kernel text base: 0xffffff8016800000
__HIB  text base: 0xffffff8016700000
System model name: MacPro6,1 (Mac-F60DEB81FF30ACF6)


System uptime in nanoseconds: 11618509637347
last loaded kext at 210154039780: com.apple.filesystems.smbfs    3.0.2 (addr 0xffffff7f992bb000, size 389120)
last unloaded kext at 1484252808734: com.apple.filesystems.exfat    1.4 (addr 0xffffff7f9929e000, size 57344)
loaded kexts:
com.nvidia.CUDA    1.1.0
com.realtek.driver.RtWlanU    1827.4
com.blackmagic-design.desktopvideo.iokit.driver    10.5
com.blackmagic-design.desktopvideo.iokit.framebufferdriver    10.5
net.osx86.kexts.GenericUSBXHCI    1.2.8d9
org.hwsensors.driver.GPUSensors    1394
org.hwsensors.driver.LPCSensors    1394
com.insanelymac.driver.AppleIntelE1000e    3.2.4
org.hwsensors.driver.CPUSensors    1394
org.netkas.driver.FakeSMC    1394
com.apple.filesystems.smbfs    3.0.2
com.apple.filesystems.msdosfs    1.10
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.3.6f3
com.apple.driver.AGPM    110.19.6
com.apple.driver.ApplePlatformEnabler    2.2.0d4
com.apple.driver.X86PlatformShim    1.0.0
com.apple.driver.AppleUpstreamUserClient    3.6.1
com.apple.driver.AppleMCCSControl    1.2.12
com.apple.driver.AppleHDA    2.5.3fc1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.GeForce    10.0.4
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleHV    1
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleIntelSlowAdaptiveClocking    4.0.0
com.apple.driver.AudioAUUC    1.70
com.apple.driver.AppleLPC    1.7.3
com.apple.driver.AppleIntelMCEReporter    107
com.apple.driver.AppleRAID    4.0.6
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.7.1
com.apple.driver.AppleUSBXHCI    710.4.11
com.apple.driver.AppleUSBHub    705.4.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0
com.apple.BootCache    36
com.apple.driver.AppleAHCIPort    3.1.2
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.kext.triggers    1.0
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.driver.DspFuncLib    2.5.3fc1
com.apple.kext.OSvKernDSPLib    1.15
com.apple.iokit.IOAcceleratorFamily2    156.16
com.apple.nvidia.driver.NVDAGK100Hal    10.0.4
com.apple.nvidia.driver.NVDAResman    10.0.4
com.apple.AppleGraphicsDeviceControl    3.10.25
com.apple.iokit.IOSurface    97.4
com.apple.iokit.IOBluetoothFamily    4.3.6f3
com.apple.iokit.IOUSBUserClient    705.4.0
com.apple.iokit.IOSerialFamily    11
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.iokit.IOSlowAdaptiveClockingFamily    1.0.0
com.apple.driver.AppleHDAController    2.5.3fc1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOHDAFamily    2.5.3fc1
com.apple.driver.X86PlatformPlugin    1.0.0
com.apple.driver.AppleSMC    3.1.9
com.apple.driver.IOPlatformPluginFamily    5.9.1d7
com.apple.driver.AppleUSBAudio    295.23
com.apple.iokit.IOAudioFamily    203.3
com.apple.vecLib.kext    1.2.0
com.apple.driver.AppleUSBMergeNub    705.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.5
com.apple.iokit.IOUSBHIDDriver    705.4.0
com.apple.iokit.IOUSBMassStorageClass    3.7.2
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.5
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOAHCIFamily    2.7.5
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOUSBFamily    720.4.4
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    398
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.pthread    1
com.apple.kec.Libm    1
Model: MacPro6,1, BootROM MP61.0116.B04, 6 processors, 6-Core Intel Xeon E5, 4.2 GHz, 32 GB, SMC 2.2f18
Graphics: NVIDIA GeForce GTX TITAN, NVIDIA GeForce GTX TITAN, PCIe, 6144 MB
Memory Module: BANK0/DIMM0, 8 GB, DDR3, 2133 MHz, Undefined, F3-2133C9-8GXH
Memory Module: BANK1/DIMM0, 8 GB, DDR3, 2133 MHz, Undefined, F3-2133C9-8GXH
Memory Module: BANK2/DIMM0, 8 GB, DDR3, 2133 MHz, Undefined, F3-2133C9-8GXH
Memory Module: BANK3/DIMM0, 8 GB, DDR3, 2133 MHz, Undefined, F3-2133C9-8GXH
Network Service: 802.11n NIC, Ethernet, en1
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Samsung SSD 850 PRO 256GB, 256.06 GB
Serial ATA Device: Samsung SSD 850 PRO 256GB, 256.06 GB
Serial ATA Device: Samsung SSD 840 PRO Series, 256.06 GB
USB Device: Hub
USB Device: Vendor-Specific Device
USB Device: Integrated USB Bridge
USB Device: Hub
USB Device: Hub
USB Device: Logitech Camera
USB Device: Intuos5 touch M
USB Device: Hub
USB Device: Schiit USB Audio Device
USB Device: Ultra Fast Media Reader
USB Device: HDLink Pro
USB Device: USB Receiver
USB Device: USB
USB Device: Mass Storage Device
USB Device: 802.11n NIC
USB Device: Microsoft® 2.4GHz Transceiver v7.0
USB Device: G-DRIVE mini5
USB Device: G-DRIVE mini5
Thunderbolt Bus:

 

[Lenk]

As I did have trouble with W8 in the first place, here my 2 cents.
Very short: you must install the x64 version of windows in "uefi mode" to "use" it in clover.

1) Make an UEFI USB boot stick under Windows
insert USB stick
start 'diskpart.exe' and then type
list disk
select disk 5 (--> for '5' please use the number of your USB stick from the 'list' command)
clean
create partition primary
select partition 1
active
format quick fs=fat32
assign
exit

2. copy the content of your windows 8.x x64 ISO to the USB stick
xcopy x:\* y:\ /s /e (--> please set 'x' for 'this is wher your ISO content is' and 'y' to your USB stick)

In case the install.wim file you are using is bigger then 4GB (mine now contains updates) and the xcopy command is not working, here is how you can proceed. Note: this is only working under windows >= v8!
md c:\temp\wim
cd c:\temp\wim
robocopy x:\sources c:\temp\wim install.wim
dism /Split-Image /ImageFile:c:\temp\wim\install.wim /SWMFile:c:\temp\wim\install.swm /FileSize:2500
del c:\temp\wim\install.wim
robocopy x:\ y:\ /e /s /R:0
robocopy c:\temp\wim\ y:\sources\

3. set all bios settings as told in post #1 this ensures you will boot in UEFI mode

4. Use the USB stick you just created to make a fresh install of windows to a separat, clean drive

You should now be able to choose windows in clover

I try 2 way to dual boot in windows 7

1. I use old hdd that I have installed windows 7 of this machine and work perfects (before I hack this to clover OS X), when I press hold down space bar to clover gui I see 2 disk partition in clover gui, first one should be system reserve(HD1) and second I think windows 7 os(HD2). I tried with all partition, the screen just show me windows logo on black screen.

2. fresh install follow this guide and tak21 guide also. When I press win7 usb bootable in clover gui the screen just show me windows logo on black screen

can someone explain in depth for dual boot.

Thank (sorry for my bad english)

 

[Nightjar93]

@shilohh

I'm very happy to have found this post!

With my latest projects/jobs I was having the real need for Pro Res and windows made me suffer. I'm new to this hackintosh business and just read the last few hours about it. I have a very similar setup to yours though:

4930k
GTX 770
ASUS P9X79 (non Pro, Deluxe, Rampage etc.)
G.Skill RipJaws (non Z) 2133mhz.
Corsair H110i
Coolermaster v850
4 x 3 TB WD RED (inteded for a internal RAID 0)
256 GB EVO SSD (OS)

Do you think following your steps with my slightly differing setup will be a no brainer?

My second question is: is it even possible to run a motherboard driven RAID 0 on a hackintosh?

I would appreciate your expertise I want/need Pro Res back so badly...

 

[Nightjar93]

UPDATE:

During step 10 the reboot stops halfway and I don't know why.

Thing that could have gone wrong:

Step 8) I first installed Clover withe the wrong settings, and then reinstalled...

Step 9) In Multibeast I didn't have the "Optional EFi Installed..." Option

Step 10) While pressing F4 should I see something happening on the screen? Cause I don't...

Or are my specs the problem? See post just above!

Thanks for the support. I hope I'll get this to work...

Cheers

UPDATE2:

I tried the whole thing from the top...again without succes at step 10! This time thought my graphics were a little funky and slow beforehand (it was very laggy before step 10)! At step 10) when OS X was rebooting the monitor lost its connection halfway through and didn't come back...

I'm no expert; so please someone help me!!!

 

[ferdinand]

Hey guys,
I just wanted to post my experiences with adding a second GPU to the setup. I'm pretty new in the hackintosh community, but this thread helped me big time to get going. Thanks a lot shilohh for your effort and the great guide.

Since I couldn't find easy to understand instructions (at least not bundled in one place) here on how to add a second GPU I wanted to write a quick roundup of what I did to maybe help others who want to do the same. I apologise in advance if this is something completely obvious

I have pretty much the same specs as describe in the guide, I'm running a EVGA NVidia GTX980 and wanted to add an additional GTX980Ti. I made sure that my NVIDIA Web Drivers and the CUDA driver were up to date. After installing the additional GPU on my mainboard I turned on my machine and it crashed immediately at the OSX boot screen. I was a bit desperate again, but some searching through this thread helped me.

What I did was to remove the new card, delete my DSDT.aml from the EFI partition, put the second GPU in again, boot (now it worked) and follow the DSDT-Guide (http://www.tonymacx86.com/dsdt/1144...ide-create-your-dsdt-5-min-using-maciasl.html) again.



The 980Ti shows up as NVIDIA Graphics Device, but is fully operational. Speeding up my Octane renders about 100% as expected. I was a bit worried as well if my 760W PSU was enough to power those two cards rendering full throttle, but no problems.

I hope this might help somebody who is running into problems, and sorry again if this is something absolutely obvious and I was just to dumb to realise


Thanks again shilohh, I'm very glad that I decided to go the hackintosh route and you've been my guide all along

 

[Silizium]

Oh man! I work a lot with Vue 10 xStream. I would be happy to have this configuration! But I think it is almost to late to find a Rampage IV. Although I have a Samsung EVO 1TB already And the things that makes it not even more easy: I stay in Thailand.

 

[shilohh]

Oh man! I work a lot with Vue 10 xStream. I would be happy to have this configuration! But I think it is almost to late to find a Rampage IV. Although I have a Samsung EVO 1TB already And the things that makes it not even more easy: I stay in Thailand.

Not sure if you can get Newegg to ship to Thailand but:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813132053

 

[shilohh]

I have been experiencing random reboots. Sometimes it will happen 30 min post-boot sometimes 2-3 hours. I posted the error report for reference. Ive tried everything short of a new install. If anyone has any insight into this problem it would be greatly appreciated.

Anonymous UUID:       451A522B-C40D-DB3C-E0B6-61AEE8AB1908

Thu Sep 17 13:54:08 2015


*** Panic Report ***
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(720.4.4)[4ED60649-760E-3E91-9C58-322700847C7E]@0xffffff7f977be000->0xffffff7f97822fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[BDA92C3B-AD86-33E5-A7F1-1603465350A7]@0xffffff7f97124000
         net.osx86.kexts.GenericUSBXHCI(1.2.8d9)[00000000-0000-0000-0000-000000000000]@0xffffff7f9884b000->0xffffff7f98862fff
            dependency: com.apple.iokit.IOUSBFamily(720.4.4)[4ED60649-760E-3E91-9C58-322700847C7E]@0xffffff7f977be000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[BDA92C3B-AD86-33E5-A7F1-1603465350A7]@0xffffff7f97124000
         com.realtek.driver.RtWlanU(1827.4)[24DDFA6C-C845-390E-870F-92330196C84E]@0xffffff7f9782f000->0xffffff7f97afafff
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[150D35F0-A5B1-3C6C-803A-A45B70166285]@0xffffff7f9778b000
            dependency: com.apple.iokit.IOUSBFamily(720.4.4)[4ED60649-760E-3E91

I'd start by deleting genericusbxhci from SLE and rebuilding the caches.

 

[shilohh]

I tried the whole thing from the top...again without succes at step 10! This time thought my graphics were a little funky and slow beforehand (it was very laggy before step 10)! At step 10) when OS X was rebooting the monitor lost its connection halfway through and didn't come back...

I'm no expert; so please someone help me!!!

Sounds like the DSDT patch lists are not compatable with your p9x79. Plug in your USB installer and start the system holding down the f8 key to reach the boot disc override dialog. Choose the Mac OS boot drive/SSD. When the system starts use mount any efi to mount the Mac OS boot drive's EFI partition and delete DSDT.aml from EFI/CLOVER/acpi/patched. Eject the USB installer and restart

 

[akkman]

Croink,

We have nearly identical setups. I currently have dual GTX 780's in SLI. I am getting ready to move to the GTX 980 TI.

Do you have your machine set as Mac Pro 5,1 or 6,1?

Did you have to patch the Kext for the GTX 980 TI to work correctly or just run the AGPDfix?

I want to upgrade my video but am worried about screwing up a functional hack!

I look forward to your reply.

Thanks,

Brad