kgp
Retired
- Joined
- May 30, 2014
- Messages
- 6,743
- Motherboard
- ASUS WS X299 Sage 10G
- CPU
- i9-7980XE
- Graphics
- Vega 64
- Mac
- Mobile Phone
Yes we have tried all custom flags such as "NvidiaWeb" Load VBIOS ect. Yes 4G encoding needs to be on to allow memory to the PCI busses. How would I adapt a custom SSDT for those GPUs? Any suggestions? Thanks as always!
By means of your IOREG information for each GPU. You will just have to adopt ACPI path and ACPI replacement for each SSDT. You have to choose for each SSDT a different filename and also the name in the definitionblock must be different for each SSDT. As device for each GPU, you implement GFX0, GFX1, GFX2.. etc., respectively. This small guideline might help you in your endeavour. The implementation of two GPUs also has been recently discussed in one of my threads in line with provided examples. Please investigate recent posts in my X99 or X299 threads, I am sure you are able to find what I am referring too.
Do a stepwise approach. Try to connect, use and successfully implement a single PCIe GPU at first place. Once this works as expected, add the second PCIe GPU. Once this works, start adding stepwise the eGPUs.
Good luck in your in endeavour,
KGP
Last edited: