Contribute
Register

Freezing after some time of using or Heavy App's.

Status
Not open for further replies.
Yeah it freeze even after new installation.
when i plug my USB drive or USB internet Device system hangs but not every time, it does this some time. right now i am connected using same USB internet and its working fine now.

Strange thing happened yesterday, i switched of charger's power and system stopped working it freeze just by switching power off of charger, charger was still plugged in laptop.
After this i reboot it by long pressing power button of my laptop then i got this kernel panic.

Check these images in full size
IMG_20140506_070410.jpg
Using -v system hangs here
IMG_20140506_071426.jpg

After 2 times reboot from this kernel panic screen i was able to boot normally again.
Its not reliable. Why installation is so sensitive? Am i missing something?
 
Yeah it freeze even after new installation.
when i plug my USB drive or USB internet Device system hangs but not every time, it does this some time. right now i am connected using same USB internet and its working fine now.

Which USB WiFi are you using? Are you using current drivers?

Strange thing happened yesterday, i switched of charger's power and system stopped working it freeze just by switching power off of charger, charger was still plugged in laptop.
After this i reboot it by long pressing power button of my laptop then i got this kernel panic.

Check these images in full size
View attachment 91941
Using -v system hangs here
View attachment 91942

After 2 times reboot from this kernel panic screen i was able to boot normally again.
Its not reliable. Why installation is so sensitive? Am i missing something?

Please detail your installation procedures.
 
Which USB WiFi are you using? Are you using current drivers?
I'm using this USB internet device, Driver is already in it and working fine.
http://consumer.huawei.com/en/mobile-broadband/wingle/tech-specs/ec315-en.htm
system hang even without this device connected. it also hang with USB drive i used to install Mavericks.

Please detail your installation procedures.
This is how i install:
Mavericks installation using uniBeast. Current installation is OS X 10.9.2 (13C64).
bootflags used while installing, -x GraphicsEnabler=No PCIRootUID=1.

MultiBeast options:
MultiBeast.png

SMBios MacBook Air 5,2 Selected using Chameleon wizard. (Dart=0 bootflag added)
Reboot in normal mode.
patched mach_kernel using guide here.
reboot using -xcpm.
SSDT created using ProBook Installer.
Power Management working using patched mach_kernel, -xcpm hack (P States: 8, 14, 17, 20, 22, 23, 24, 25, 28, 29).

DSDT patches & kexts:
patches taken from here.
1) VoodooPS2Controller.kext downloaded from here,
2) graphics_HD4K_low.txt,
3) GFX0 renames to IGPU in DSDT.
4) graphics_PNLF_ivy_sandy.txt,
5) ACPIBacklight.kext,
6) patched AppleHDA & audio_HDEF-layout12.txt and layout id 1 is added sound working fine,
7) system_IRQ.txt,
8) ACPIBatteryManager.kext

System working fine and fast but facing that hanging problem some times.
 
I'm using this USB internet device, Driver is already in it and working fine.
http://consumer.huawei.com/en/mobile-broadband/wingle/tech-specs/ec315-en.htm
system hang even without this device connected. it also hang with USB drive i used to install Mavericks.

Do you know what chipset that USB WiFi uses?

This is how i install:
Mavericks installation using uniBeast. Current installation is OS X 10.9.2 (13C64).
bootflags used while installing, -x GraphicsEnabler=No PCIRootUID=1.

MultiBeast options:
View attachment 92020

SMBios MacBook Air 5,2 Selected using Chameleon wizard. (Dart=0 bootflag added)
Reboot in normal mode.
patched mach_kernel using guide here.
reboot using -xcpm.
SSDT created using ProBook Installer.
Power Management working using patched mach_kernel, -xcpm hack (P States: 8, 14, 17, 20, 22, 23, 24, 25, 28, 29).

DSDT patches & kexts:
patches taken from here.
1) VoodooPS2Controller.kext downloaded from here,
2) graphics_HD4K_low.txt,
3) GFX0 renames to IGPU in DSDT.
4) graphics_PNLF_ivy_sandy.txt,
5) ACPIBacklight.kext,
6) patched AppleHDA & audio_HDEF-layout12.txt and layout id 1 is added sound working fine,
7) system_IRQ.txt,
8) ACPIBatteryManager.kext

System working fine and fast but facing that hanging problem some times.

Can you boot successfully without -xcpm?
 
Do you know what chipset that USB WiFi uses?
No i don't. How can i check it?



Can you boot successfully without -xcpm?

Yeah it boot successfully without -xcpm when i don't patch mach_kernel but then PStates stuck at x8.
 
No i don't. How can i check it?

I was just wondering if it was Realtek... doesn't seem like it.

You might look into using a USB WiFi that has been proven to be reliable.

See here: http://www.tonymacx86.com/lion-lapt...1-mac-os-x-new-install-help-3.html#post757701

Yeah it boot successfully without -xcpm but then PStates stuck at x8.

Post ioreg (without -xcpm): http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html

And what is the output of:
Code:
kextstat|grep -y acpiplat
 
Have you tried Chameleon yet?
Chameleon boot loader?
No i don't know how to do that, i am using Chimera v2.2.1 from MultiBeast.
i thought Chimera and Chameleon are same?
I thought about installing using Clover but that is a bit difficult have't tried it yet. what is your recommendation?
 
Chameleon boot loader?
No i don't know how to do that, i am using Chimera v2.2.1 from MultiBeast.
i thought Chimera and Chameleon are same?
I thought about installing using Clover but that is a bit difficult have't tried it yet. what is your recommendation?

Chameleon and Chimera are not the "same." Chimera is a branch of Chameleon. Chameleon is updated far more often than Chimera.

Clover is worth a try too...
 
Status
Not open for further replies.
Back
Top