- Joined
- May 26, 2012
- Messages
- 5
- Motherboard
- Asus ROG STRIX Z370-E GAMING
- CPU
- I7-8700K
- Graphics
- RX 570
- Mobile Phone
Hi there
I'm using PC in configuration:
MB: Asus ROG z370-e Gaming
CPU: Intel core i7 8700K
GPU: Sapphire RX 570 Pulse 4GB
RAM: 16 GB one-stick memory
I have installed on it MacOS Catalina 10.15.7 running with Clover 2.5K 5098 as iMac18,1.
Then i've tried to update directly to Big Sur 11.3 with no success.
I thought that main reason was too old Clover with old kexts and UEFI drivers.
So, i've updated to Clover 5128 with same configuration but new UEFI drivers and some updated kexts.
But installer running still fails (stuck) with (i guess) some problems with ACPI tables (screenshot #1).
So, i've created install usb with Big Sur 11.3 and tried to run it as clean installer. But got the same issue:
As i know this error shouldn't be critical. But after that message loading process have stuck.
And my last try was to use OpenCore 0.6.9.
I've made bootable usb according to instructions from dortania for COFFEE LAKE desktops.
But result is still the same (screenshot #2).
So, i will be appretiate for any help.
My configurations for Clover and OpenCore are also attached.
I'm using PC in configuration:
MB: Asus ROG z370-e Gaming
CPU: Intel core i7 8700K
GPU: Sapphire RX 570 Pulse 4GB
RAM: 16 GB one-stick memory
I have installed on it MacOS Catalina 10.15.7 running with Clover 2.5K 5098 as iMac18,1.
Then i've tried to update directly to Big Sur 11.3 with no success.
I thought that main reason was too old Clover with old kexts and UEFI drivers.
So, i've updated to Clover 5128 with same configuration but new UEFI drivers and some updated kexts.
AHCI-300-Series.kext, v.1.0.1
CodecCommander.kext, v.2.6.3
FakeSMC.kext, v.1765
FakeSMC_LPCSensors.kext, v.1765
FakeSMC_ACPISensors.kext, v.1765
FakeSMC_CPUSensors.kext, v.1765
XHCI-200-series-injector.kext, v.0.5.0
USBInjectAll.kext, v.0.6.4
Shiki.kext, v.2.2.0
EFICheckDisabler.kext, v.0.5
IntelGraphicsFixup.kext, v.1.2.3
Lilu.kext, v.1.5.2
WhateverGreen.kext, v.1.4.9
AppleALC.kext, v.1.5.9
IntelMausi.kext, v.1.0.5
CodecCommander.kext, v.2.6.3
FakeSMC.kext, v.1765
FakeSMC_LPCSensors.kext, v.1765
FakeSMC_ACPISensors.kext, v.1765
FakeSMC_CPUSensors.kext, v.1765
XHCI-200-series-injector.kext, v.0.5.0
USBInjectAll.kext, v.0.6.4
Shiki.kext, v.2.2.0
EFICheckDisabler.kext, v.0.5
IntelGraphicsFixup.kext, v.1.2.3
Lilu.kext, v.1.5.2
WhateverGreen.kext, v.1.4.9
AppleALC.kext, v.1.5.9
IntelMausi.kext, v.1.0.5
But installer running still fails (stuck) with (i guess) some problems with ACPI tables (screenshot #1).
So, i've created install usb with Big Sur 11.3 and tried to run it as clean installer. But got the same issue:
Code:
ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload2-274)
And my last try was to use OpenCore 0.6.9.
I've made bootable usb according to instructions from dortania for COFFEE LAKE desktops.
But result is still the same (screenshot #2).
So, i will be appretiate for any help.
My configurations for Clover and OpenCore are also attached.