- Joined
- Mar 4, 2014
- Messages
- 15
- Motherboard
- GA-Z97X-UD7TH
- CPU
- i7-4790K
- Graphics
- GTX 740 2GB GDDR5
- Mac
- Mobile Phone
Please help me! I feel like pulling my hair out I need help from experienced members of the community; I have been trying to install OSX Mavericks on my rig for about 2 months now with limited success. The majority of the time I would get a “this is not a kext ‘blah blah blah’ cpu=0 backtrace” error at some point (it will be attached), but the furthest I’ve gotten is pasted the installer.app and setup. app and into the actual OS where I ran Multibeast post install, but upon reboot I ran into the same cpu=0 error as before. Now, no matter what settings I use on Multibeast or clover OSX installers (both of which I am comfortable using) I still run into the same cpu=0 error. Most of the time once it hangs it requires a cold reboot, but after this current Multibeast configuration it just says waiting for “root device…”a lot while trying to load installer.app. [Yes I already optimized and updated the BIOS vF4 (which I am also comfortable with) and I’ve disabled: VT-d, Turbo Boost, Fast Boot and generate C3 states and generate C6/C7 states. I use the dedicated GPU not the iGPU, I have an HDMI cable going from my GPU to my 40” Sony Bravia television, yes I get picture without a problem. I know all of my hardware is functional being I have both windows 7 /8.1 and Linux Mint installed with no problems. It passed all stress tests.] I have followed every guide and various [SUCCESS] build forums that were similar to mine, I even posted and asked a question prior to this and still no luck.
Now that I think I have provided all of the necessary background information about my problem I would like to ask my question; can someone PLEASE suggest to me either a Multibeast or clover configuration capable of installing and booting Mavericks 10.9.4? If you feel any changes to the BIOS should be made PLEASE suggest them, I am open to anything at this point. THANK YOU in advance.
{ABOVE ARE THE 4 PICTURES OF ERRORS I HAVE/AM ENCOUNTERING}
Below are the parts I used for my rig, all approved by the buyer’s guide:
http://www.amazon.com/dp/B00JKCHENK/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/B00KPRWAX8/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/product/B00A0HZMGA/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/B00CU9GOAO/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/gp/product/B00A14ZTWE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 x3
=24 GB
http://www.amazon.com/dp/product/B00E3W16OU/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
for OS installation
http://www.amazon.com/dp/B005T3GRLY/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 as a storage drive
http://www.amazon.com/gp/product/B0090I9VZI/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 yes it was recommended the month I bought it
http://www.amazon.com/dp/product/B004X63JWS/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/product/B007JR532C/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 as OSX 10.9.4 installer (borrowed friends Macbook Pro to use Unibeast on)
http://www.amazon.com/dp/product/B00DVTBM2W/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/product/B005L38VRU/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 works in BIOS and installer.app
http://www.amazon.com/dp/product/B003XIJ3MW/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 as a post installation mouse, I have one that works in the BIOS and installer.app by Logitech
http://www.amazon.com/dp/B007MKMJGO/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 long range model
Now that I think I have provided all of the necessary background information about my problem I would like to ask my question; can someone PLEASE suggest to me either a Multibeast or clover configuration capable of installing and booting Mavericks 10.9.4? If you feel any changes to the BIOS should be made PLEASE suggest them, I am open to anything at this point. THANK YOU in advance.
{ABOVE ARE THE 4 PICTURES OF ERRORS I HAVE/AM ENCOUNTERING}
Below are the parts I used for my rig, all approved by the buyer’s guide:
http://www.amazon.com/dp/B00JKCHENK/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/B00KPRWAX8/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/product/B00A0HZMGA/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/B00CU9GOAO/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/gp/product/B00A14ZTWE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 x3
=24 GB
http://www.amazon.com/dp/product/B00E3W16OU/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
for OS installation
http://www.amazon.com/dp/B005T3GRLY/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 as a storage drive
http://www.amazon.com/gp/product/B0090I9VZI/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 yes it was recommended the month I bought it
http://www.amazon.com/dp/product/B004X63JWS/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/product/B007JR532C/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 as OSX 10.9.4 installer (borrowed friends Macbook Pro to use Unibeast on)
http://www.amazon.com/dp/product/B00DVTBM2W/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20
http://www.amazon.com/dp/product/B005L38VRU/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 works in BIOS and installer.app
http://www.amazon.com/dp/product/B003XIJ3MW/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 as a post installation mouse, I have one that works in the BIOS and installer.app by Logitech
http://www.amazon.com/dp/B007MKMJGO/ref=as_li_ss_tl?ie=UTF8&tag=tonymacx86com-20 long range model