My laptop goes to black screen and immediately restarts whenever I connect an external display either via HDMI or VGA. Initially it used to work well on VGA, then stopped in my Dell monitor but still worked on HP display. When I tested the HDMI then I did realised that it also had the same...
I installed Catalina 10.5.5 but HDMI and DVI are not working when booting.
It works only with VGA cable and I tried several patches but it doesn't work.
I attached my EFI folder and hope someone could help me.
The last log before blank screen with DVI and HDMI cable are:
IOConsoleUsers: time(0)...
hello,
My config file is attached.
I am using a Gigabyte Z270-HD3 as my motherboard, and using a i5 7400 as my CPU + using the iGPU (Intel HD 630).
Everything works fine on my hackintosh (newly updated to Mojave). Except that when the PC sleeps, it will shutdown on wake, but that's for another...
I installed the catalina and it is working, both on the gpu and on the cpu, it is working on both on vga, would I have to configure to work both at the same time, to be able to use 2 monitors, or will I have to use on only one ?, the monitors that I have here, they are just vga, I will have to...
Hi folks, I have a '2014 build' Mac Pro Hackintosh and am experiencing problems trying to get two monitors to work.
I have always used 1 monitor, but have recently acquired some spare monitors and have decided to see if I can use one as a 2nd monitor for my Hackintosh.
I have just connected...
Hello,
I cannot get "hardware acceleration" with Premiere Pro.
I also cannot see "Intel HD Graphics" in "About My Mac"
But I can enable airplay.
There's only a VGA port for IGPU on my Motherboard.
I cannot get output from it.
Thanks for your help.
Cheers,
Brian
i3 6100 - HD 530 - No option in bios to set DVMT.
Worked on sierra with below patch and platform-id 1912000
Comment: 0x19160000/etc, 19MB framebuffer 9MB cursor bytes (credit RehabMan)Name: AppleIntelSKLGraphicsFramebuffer
Find: 01030303 00002002 00005001
Replace: 01030303 00003001 00009000...
Hi,
I followed the Probook/Elitebook/Zbook Mojave guide of RehabMan, everything work well on my Zbook G1 Haswell except of the video ports.
Tried Display Port, Mini Display and VGA, no one works.
The GPU switching is enabled in BIOS (but disabled by some patch I think) and some ports like Mini...
Hello everyone my english is poor I hope you guys can undenstand it. :D:D:D
My monitor can work if i inject platform_id with 0x01660005 or 0x3e910000 but graphics memory only 3m.
so i delect platform_id and put the Lilu.kext and IntelGraphicsFixup.kext and WhateverGreen.kext into...
Hi guys ,i have a problem with my graphics card ati 7870, i only use 1 monitor with mini displaypor(mDPI to VGA) but the other two monitors ,in hdmi and dvi to vga ,not working.Mojave detect this monitors but in black screen. i dont configured the clover configurator because a dont have idea.
My...
I'm using 750Ti and 1080p monitor with a VGA cable now.
But I cannot get full 1080p resolution during boot up.
it looks like you put a 4:3 picture in a 16:9 monitor, it looks strange.
I can get full 1080p resolution with HDMI before.
(Because my monitor doesn't provides me the correct colour...
COMMENTS
Instructions for “hackintoshing” a Dell Inspiron 3650 PC with EVGA GT 730 2 GB DDR5 with 3 monitors (including VGA)
INSTALL
1. Create bootable El Capitan USB using UniBeast with UEFI and Nvidia Inject on another mac running OS X El Capitan
2. Mount USB EFI using EFI mounter v3 and...
I turn on a dual boot (Windows 10 & High Sierra with Clover) and when I plug my VGA screen at the same time as HDMI all works with Windows 10 and the same on Mac but when turns on the computer I have to unplug the VGA because mac becomes all pink and the image jumps. It works but not properly...
Hello,
i want to change my SMBIOS from MacBook Air 5,2 to MacBook Pro 8,1.
Yes, i know its easy by using the Clover Configurator... but I have the following problem:beachball::
After changing the product name my Wifi doesn´t work anymore. I thought it might work if I change the whitelist...
Has anyone been able to find a fix for this problem? The Nvidia web drivers won't activate and from what I've found myself it's because my monitor is connected via a DVI to VGA adapter.
Specs :
4690K
Asus Z97-K
8GB RAM
GTX 970
Lenovo Desktop Computer M81 - Intel 4 Core i5 2400 3.10 GHz 4 GB
Found this refurbished machine for $160.00. No graphics card added but it has display port and vga.
Latest:
I'm only using VGA at the moment and it gets stuck and the last line mentioned is
Hanging at Missing Bluetooth Controller...
Hello there
I finally made my first hackintosh. Everything works except VGA and HDMI. When I plug VGA, nothing happens. When I plug HDMI, screen becomes black and i can't do anything. Is there a way to fix it? I used FakePCIID to run HD4600
So I realized that MacOS Sierra with NVIDIA web drivers does not work with a VGA to DVI-I adapter. MacOS Sierra doesn't even boot when NVIDIA drivers are enabled with the adapter, so I'm stuck with one monitor, but I want to have dual monitors with my Hackintosh.
Before buying one, would a VGA...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.