SafeSleeper
I wrote this app a while back. Feel free to download and use it as a work around for USB drives that get force ejected at sleep. SafeSleeper will properly eject all USB drives and put the computer to sleep. It will detect and warn you if a network connection like File Sharing is...
Hi guys,
I've got myself a GIGABYTE GA-Z87M-D3H and INTEL Core i7 - 4771 and have successfully installed Mavericks thanks to your guide(s)! Thus kudos to you :thumbup:
However, I have run MultiBeast and amongst others I've selected Drivers > Misc > USB 3.0 - Universal. Afterwards I have...
After changing to the new Mavericks multi beast, my usb3 pcie express card is working no more!
So i decided to switch back to 6.0.1 but that didn´t work!
That is not very good while i want to use the USB3 for shooting Films and to save fast my Memorycards.
Please can someone help me out?
Thanks...
Hi,
It's the first day on my Hackintosh all is well, but I'm not sure if my NEC/Renesas USB3 controller works as it should. I had a hard drive connected to it and all of a sudden the error popped up saying HDD was not properly ejected. HDD just got disconnected as if the cable was pulled.
So...
ExpressCard 34 and MBP
Hi everyone!
This is my first post here so I hope this is in the right place!
(If not, tell me how to move it or please feel free to move the topic :) )
I have an old MBP 2008 (2.4GHz Intel Core 2 Duo) and I noticed it had a slot at the side, after a little bit of...
My USB3 GMYLE card worked fine in Mountain Lion 10.8, but it's not working any more in Mavericks. I've used the 10.9 Multibeast installer and installed the USB3 drivers, but still no dice. Does anyone have any idea how to fix this, or have another source for drivers that will work?
Hello,
I updated to Maverick last week, everything fine except my USB 3 ports. Connecting any HDD/USB Stick was working but not writing on it, OSX showed error 36.
i installed the USB 3 drivers from Multibeast 5.2.1. and everything is fine now!
cheers
svart
I have a following Hackintosh
GA-Z77X-UP4 TH
i7-3770K
32 GB memory
GTX 760
2 x Acer T231H LCD display
I first installed OS X Mountain Lion on it. Installation was a bit tricky, but in the end everything worked smoothly. I disabled the internal graphics and used only GTX 760. Only problem was...
Hi. I just want to hear any quick ideas about what I should check to get my front panel USB3 ports working again.
They worked just fine with my OSX 10.8, but when I upgraded to Maverick the functionality went away. USB devices are not recognized any more.
MOBO: Gigabyte Z77X UD5H
Thanks...
Hello! I've just installed the latest update from Mountain Lion, but i can't get my usb3 ports to work properly. The only way i could avoid kernel panics and get the usb3 visibile in System Information was with some patches for Clover. Although i can see my drive in System Information, there are...
Hello, first time hackintosher here.
I built my first machine using the exact parts list from TonyMac's April 2013 CustoMac Mini guide.
Intel Core i3-3225
GA-H77N-WIFI
Corsair Vengeance 8GB 1600Mhz DDR3
Sandisk Extreme 120 GB SSD
Apex Mi-008 with 250W power supply
Retail 10.8.0...
[Solved] - Kernel Panic with MultiBeast 5.3 and LaCie USB3 Drives
Anyone else having Kernel Panic on boot with LaCie USB3 drives connected or the System hanging when connecting a LaCie USB3 drive?
None of my LaCie Rugged USB3 drives will work with the MultiBeast 5.3 update. My other USB3...
NEC / Renesas USB 3.0 Controller (Laptop Internal) [RESOLVED]
Thanks to this forum (and some others), my Dell Inspiron 17R N7110 laptop has been up and running 10.8 great for a while. No critical issues. I plan on posting a guide but want to wait until I try updating to 10.8.3 and see how...
I've had my hackintosh set up for a while now but only realised some of the usb 3 ports are working on the motherboard, what would be the easiest way to enable the use of these?
Thanks, Andy.
(SOLVED) USB 3.0 behavior + Via Labs VL811 USB3 hub chip (GA-z77x-ud5h rev. 1.1 mobo)
SOLVED (See last post)
As far as I know my questions do not pertain to the GA-z77x-ud5h rev. 1.0 mobo as it uses the Via Labs VL810 USB hub contoller
chip. Also as of 2 weeks ago I am new to all of this and...
z77p-d3 vs z77 extreme 4. need help please
Hi all. im new to hackintosh so i need help to choose from these 2 mobo because they are in my price range. Based from my research, here is something that i understand from this two mobo.
z77 extreme 4
lan = need to use the broadcom57781 kext using...
So when I built my latest hackintosh, my old usb2 card reader ceased to work. Couldn't enumerate or something. Well I was on the search for one that would work and I found one so I wanted to share incase someone else is looking.
Rosewill 74-In-1 3.5-Inch Internal Card Reader with USB Port 3.0...
I have 2 Gigabyte EP45-UD3P have been running stable for a long time, I don't have the desire to upgrade the motherboards and everything. One is running Lion 10.7.5 and the other is running Mountain Lion 10.8.2. I see that the Asus U3S6 which is recommended in another thread is discontinued and...
Hi,
I have ASRock USB 3.0 PCIe card http://www.asrock.com/mb/spec/card.asp?Model=USB%203.0%20Card
According to the official spec, the chipset on this card is NEC µPD720200.
I have tried using the USB3 Kext from multibeast. This allows the card to be detected in System Information...
I have a running hackintosh with a Gigabyte Z77X-UP5-TH board as the foundation. Things are fine right now but I need a fast (very fast) media reader to transfer pictures from my camera compact flash cards.
The cards are UDMA7 Lexar 1000x 64gb so I would prefer a Media Reader that is connected...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.