usb3

I had a spare SSD laying around, so i'd thought i'd look for an USB3 enclosure, since the new shiny Inatkeck USB3 Cards pretty much all work OOTB without doing anything in El Capitan. The USB3 enclosure supports UASP mode, which is according to claims, a 70% faster protocol for USB3 + SSD...

First of all, at Yosemite all worked like a charm. El Capitan 10.11 I'm not sure I remember which port I used to connect bluetooth but seems both worked. Last El Capitan update 10.11.1 was installed generally with no issue (except, first boot nv_disable=1 to avoid black screen, then...

I need to get USB 3.0 working, but my board has got the old NEC chipset. Obviously, I need a PCIE card. Any experience with the Fresco FL1100 USB 3.0 chipset? It is listed in Apple's kexts as XHCI, it seems it used to work OOB at least under 10.8.2, and I saw one mention of it working OOB in...

Hello everybody ! My Hackintosh has 3 years now I've build the Lexon's Haswell Build that you can see here : http://www.tonymacx86.com/user-builds/120496-lexones-haswell-build-ga-z87x-oc-w-dsdt-i7-4770k-gtx780.html Now I'm running on Yosemite 10.10.2 and use Multibeast 7.0.2. Since the...

Hi, Yeserday I installed OSX Yosemite using Clover. I used the basic instructions from this site. Installation went smoothly, I only needed to use the nv_disable=1 parameter to get going. Everything seems to work just fine, except for the USB 3.0 ports on my motherboard. I downloaded the...

Hello everyone, After a lot of research, I still don't understand or have clear answer on how to get Lacie USB3 Hardrive working on Yosemite with my GA-X79-UP4. I'm using kext usbXHCI and it works quite well with all harddrives except Lacie and sometimes Seagate. Do you have any ideas how to...

[SOLVED] USB3.0 Asmedia 1042 awakens from sleep Yosemite I have fully worked Yosemite 10.10.3 system installed on hardware from signature. But there is one annoying nuance. My system wakes up immediately after going to sleep. I like to find out why. I used syslog |grep -i "Wake reason" in...

Hello Everyone, I just installed NEC Renesas D720201 USB3 Pci Card. I'm on Yosemite 10.10.2 and the card isn't showing up on the info system. So, drives aren't mounting when I'm connecting them to the card. I'm now using the GenericUSBXHCI USB 3.0 drivers.Do you know how I can enable this card...

Hi all, I got a x99-UD4 couple days ago and finished the build running 10.9.5. All other parts work fine at the moment, except those USB3.0 blue ports. They look like USB3.0 but actually they are running USB2.0 speed. I've used Multibeast to install the GenericUSBXHCI.kext, but it seems that...

[EDITED] Fix for Yosemite and random freezes with USB ports (see the second post) (Excuse my level of english, i'm not english native) [This solution with MagicPrefs it's not definitive, see the second post for a REAL solution] This is my first hackintosh. After weeks of searching a...

Hi everybody, I'm here to attempt to address 2 problem's I've been having with my Asus VivoBook S400CA lately. I got my Crucial 4GB RAM stick today and put it in the extra DIMM slot in my laptop, and while it performs like it should in OS X (it has 8GB memory, runs fine), it reports in System...

I just had to replace a failing PSU in my box and put in a new Coolermaster 1000W PSU. (previously had a ThermalTake 750W) Everything is back up running fine except now both ethernet and USB3 external drives will randomly disconnect. It's only for a moment, the drive remounts itself right...

Hi all I have installed Yosemite on my H77N-WIFI with i5-3570K, GeForce GT 640, 16GB vengence ram, SSD etc All pretty good - sound working, Apple store, etc. My main problems are no USB3 and no shutdown. After selecting shutdown, the mac OS seems to shutdown, but box & fans don't switch off!! I...

As the title says. I click build and Multibeast progress meter instantly goes to 50%/half-way but remains there/gets stuck and then reports installation failed. I'm trying to get a Startech ECUSB351 flush USB3 expresscard to work in Yosemite. It worked fine in 10.9 Mavericks using...

Z77x- ud3h usb3 yosemite problem- SOLVED I have Yosemite right now with multi beast 5.0... everything is ok except my usb3 ports... the system can't recognize any of them...some time only 1-2 but not for ever and not every boot, what happened? any ideas? on Mavericks i haven't problems at...

I wonder if there are some usb 3 wifi dongle that can be recognize and managed by an hackintosh. any idea?

I have a usb3 device, that intermittently disconnects and immediately reconnects(with the usual warning this device was not ejected properly blah blah blah). The only correlation I think, is that it *sometimes* happens on heavy I/O. More like massive amount of small file transfers than big sized...

My Define R4 case has two USB3 ports on the front. These work perfectly fine until I try to use a USB3 device, in this case, a Kingston DataTraveler G4. If I try to copy anything larger than a text file, I receive this error message: The Finder can’t complete the operation because some data in...

Hello Everyone!!! I Have some question.. this is my hackintosh Mavericks 10.9.2 GIGABYTE GA-Z68X-UD3H-B3 F12 Intel® Core™ i5-2500 Processor (6M Cache, up to 3.70 GHz) AMD Radeon HD 6670 Intel 330 SSD 120GB 16G Ram Everything is fine. but when I use USB 3 ... Sometimes System...

Hello guys, I need to buy another external drive, I need suggestions for hardware (for sure I need USB3 connectivity). And also I have to decide what filesystem to use??? Basically I need it for backup of my 256GB laptop's internal SSD to bye used with Time Machine. That's quite clear. I'll...