stuck

irst of all here are my specs: Dual core e2180 2.0 GHz 6gb ddr3 RAM Zebronics G41 chipset mobo Seagate 250gb hdd I have been running mavericks before. It was working all right but had huge gaphics glitches(artifacts). So i decided to install sierra using unibeast and following your tutorial...

So I recently updated to the latest Security Update and everything went by smoothly. Since the whole Intel 530 sleep bug is still a thing I always shut down my Hackintosh at the end of the day. I was able to boot fine a few times but all of the sudden I am getting stuck at the Apple Logo and...

Hi there! Im trying to install macOS Sierra on the Asus GL502VS laptop. I have created the USB installer following this guide steps. Rebooted the laptop, loaded optimized defaults in the setup and disabled VT-d and Secure Boot Mode. Then try to boot from Clover into the installer with -v, -x...

Well, Booting without the boot flag cpus=1 will result in a stuck screen -v: After: it gets stuck (See photo). Boot flags that I use: kernel-dev-mode=1 dart=0 nv_disable=1 I followed RehabMan's guide of Native power management for laptop's but I don't know how to verify success of this guide...

Hello everyone.. I'm trying to install Mac OS siera hackintosh on my Acer laptop.. I can't boot the HFS drive which is basically the Mac HD drive.. I press enter but it's just stuck on this screen forever.. Any help would be much appreciated.. Thanks

My bios setting boot uefi with csm. Using clover bootloader, and always stuck at "localhost com.apple.xpc.launchd[1] <error>: assertion failed: 16B2657: launchd . . . . . . ."

Hello, I'm new into hackintosh. I stuck on logo boot, i do everything with this tutorial: https://www.tonymacx86.com/threads/unibeast-install-macos-sierra-on-any-supported-intel-based-pc.200564/ Motherboard: ASRock Z170 Pro4S CPU: Intel Skylake i7-6700 (without K) RAM: 8 GB DDR4 2666 GPU...

I bought the MSI GP62 6QF Leopard Pro, GTX 960M i7-6700HQ 16GB DDR4 And I made a UniBeast Sierra USB. The Apple bootup screen loading bar on the first time setup gets stuck at about 15% with verbose mode on: stat: /Library/ColorSync/Profiles/Displays: stat: No such file or directory mount...

After the first part of the installation it stalls after it had rebooted

Hi I just built my first CustoMac. I followed the Buyer's guide completely. Relevant hardware: i7-6700k Gigabyte Z170X-Gaming 3 Gigabyte GeFore GTX950 Ballistix LT 16 GB RAM I used 'optimized defaults' in BIOS and that fixed all the recommended BIOS settings that I'm aware off. I then went to...

Hi, im currently tryin to boot to the os x install of sierra (10.12.1) tried npci=0x2000, -v, graphicsenabler=no, usekernelcache=no theres a screenshot

Hello this is my first attempt in to building a hackintosh and I have one issue: after selecting Boot Mac OS X from USB the installation freezes. tried some X79 build suggested boot flags with no luck. one thing is odd, the usb ports all get disabled at the same point the installation...

Hi, I need help, when I try to install OS X Yosemite on my laptop with Unibeast 5.2.0, it gets stuck in "ApplePS2Controller: newCommandByte = 47", I only use the boot flag nv_disable = 1, I'm really noob and I do not know what causes the problem, If someone helps me, these are the...

Hello everybody Thanks to you for all the support I have a laptop "Asus ROG GL552VW" I am trying to install Sierra I successfully created bootablet USB and boot it I choose External from clover and then Apple logo came with a empty bar blow it that never load... That's my problem What should...

Hi ,I'm trying to install MacOs Sierra on My Asus X556UJ-XX021T 8GB RAM ddr3 i5 6200u Nvidia 920m Clover boots up correctly , the boot flags are nv_disable=1 -v When I try to boot into the installation it's stuck on ++++++++++++++ And then the laptop reboots. I tryed changing...

Hi Guys! I need some help! I am trying to update to Sierra on a Gigabite Z68MA-D2H-B3 with Nvidia 520 card. Bios are correctly configured. All the installation goes well, until it has to reboot after Multibeast 9.0.0 installs the Clover. I have tried both UEFI installations and Legacy boot...

Well, that's the thing i can't boot successfully without the flag nv_disable=1 I already try nvda_drv=1 and the new NvidiaWeb Flag but no one can help, if use them get an apple screen stuck at half. I know my GPU is a little old, but hope some support. Please help

Hi guys! I have a problem with installing mac os x to my laptop asus L502ma it has intel celeron n2840 cpu and intel graphics mobile (baytrail) . Every time i try to install it gets stuck on apple logo or in half of installation. Does anybody of u guys know which version(distribution) of mac os...

After updating to sierra and booting with clover i've found myself stuck at the login screen but given no cursor or accounts so it is for all intents and purposes "frozen". The only way to get out is to force a restart Hardware: GA-Z87X-UD7 TH NVIDIA GeForce GTX 760 I've tried various...

Guys i'm new here, i've picked the customac pro, thats what i have right now 1. Core i5-6600K 2. Gigabyte GA-Z170X-Gaming 5 3. Corsair H60 (Water) 4. EVGA GTX 950 5. Crucial Ballistix Sport LT (16GB) 6. Samsung 850 EVO 500GB 7. Corsair RM 650 Watt The thing is i have followed exactly the...