Hey guys,
I successfully installed Yosemite on my Aspire S3 391 and everything seems to work fine except the WLAN. My problem is that this Laptop has a non-supported Wifi soldered on the controller.
Now my idea is to replace the "Acer Phison M-SATA Mini PCI-E 20GB SSD KN.0200Q.005" with...
Hi. The motherboard im getting for my hackintosh doesn't have wifi or bluetooth built in it. I was wondering if there was a wifi card that has Bluetooth built into it that is compatible with hackintosh? I'm looking for something that I can plug into the last PCIe slot on the motherboard.
I just bought an SM951 256GB PCIe SSD to replace my XP941. Previously, I had modded my bios to include the Samsung EFI module and I could boot from the XP941. No such luck with the SM951. However, the SM951 is write able in OS X. Anyone try this? Different EFI module needed in bios?
I have an older Gigabit z68-UD3H-B3. I have used it for FCPX with a Samsung 512SSD, I7 Quad, 16 GB DDR-3 at stock speed and a GTX670 2G Asus for over 2 years now but I would like to add Thunderbolt 2 support. After a bit of research this seems to the only good card available for my system...
Hi all,
I have a problem with my Networking card. I installed the drivers from Multibeast (Realtek RTL81892) and it still doesn't work. [Hope this post is in the correct forum section, if not, sorry about that) Ethernet works brilliantly, super fast!
My setup:
MOTHERBOARD: Gigabyte Z87 HD3...
I have finally got everything working on my hackintosh build. I am LOVING it way more than I thought I would!!
I want to use my iMac as a third/fourth display for the machine and I was wondering if I could do this using target display mode. This is where you can use a thunderbolt cable from...
I have NOT built a HACKINTOSH YET but am researching this site for a build, because I want to use NVIDIA graphics cards instead of the current APPLE offerings that i think are very limited for NVIDIA CUDA users as well as AUTODESK SMOKE users.
I am curious to ask why no one on this site or...
Dear TMers,
I am looking for a PCIe card which has Firewire800 ports and a eSata port.
It has to work without problems under Mavericks 10.9.2, on a GA-Z68X-UD3H-B3 board (rev 1.3, EUFI Bios).
Did some Googling but can't the tree though the woods so to speak.
Does anyone know if such a...
Hello
I`m currently running this setup:
P7H55
2.81 GHz Intel Core i5
8gigs of RAM
Nvidia 660GTX 2gb
I`m using it for various graphics applications including lately DaVinci Resolve and I`d like to get a GUI GPU for it so it can use the full power of my 660 for the video processing,but...
Hiya,
I need a preferably cheap non RAID 4 port SATA controller that is compatible with Mavericks and Windows 7/8.1.
I would really appreciate some advice since I have like 3 different controllers here and none of them work with the hackintosh. I'm reluctant to increase the size of my...
All of the newer macs feature pcie express hard drives which is supposed to significantly increase memory speeds compared to sata. However I can't seem to find any pcie hard drive information in any of the hackintosh builds. Does anyone know why this is? Thanks!
Hopefully i'm posting in the right place..
I'm having issues with my newly installed Accel card, some of my busses have random white noise.
the noise is always present but going up and down in level. (sounds like a wind on a mic)
my pro tools setup have been working flawlesly for 1 year with...
I have this graphic card and motherboard EP45-UD3R GIGABYTE. I have a problem with the video card. Even if i put NVEnabler.kext, the resolution is the same. Only 1024x768. Sys-info shows the model and specification but its simply just text. Please someone to help me :beachball::crazy:
Hi,
It's the first day on my Hackintosh all is well, but I'm not sure if my NEC/Renesas USB3 controller works as it should. I had a hard drive connected to it and all of a sudden the error popped up saying HDD was not properly ejected. HDD just got disconnected as if the cable was pulled.
So...
Since I updated Maverick I'm being experiencing strange behavior on the normal usage of my computer. My specs are:
GA-Z77X-UP4-TH, Intel i7 3770K, 32GB, 2 X SDD OCZ Agility 3 240GB RAID 0 using the MOBO ports SATA 3 where Windows 7 is installed, PCIe SATA Controller Card (StarTech PEXSAT32)...
Dear All
I'm looking for a PCIe card with FireWire 800 for my new Haswell Hack with i7-4770K and Gigabyte Z87x-OC, i'm wondering if anyone knows a good card? or if this Rosewill one will work ?
http://www.newegg.ca/Product/Product.aspx?Item=N82E16815166027
Also, if its possible to fit a PCIe...
Hey guys,
I stumbled across pcie ssds and found the raidr from asus, which is pretty interesting to me.
The website claims that it is to be recognized as a standard ACHI device by the BIOS/UEFI and thus should work driverless.
Knowing that OS X handles ACHI devices very well, I asked my...
Hey guys, I'm looking for a PCIE card that will allow me to connect 4 SATA drives (preferably SATA III) internally. I'm specifically working with a Gigabyte Z77 DS3H. Does anyone know of any that work natively?
PCIe Flash Storage Compatibility List
Hi tonymacx86 community,
I'm really interested in PCIe Flash Storage since the new 2013 Mac Pro will be taking advantage of this technology. I've been looking into Hackintosh compatible cards and haven't found any confirmed working list on tonymacx86 or...
Has anyone used this PCIe SSD before? I just purchased one and I have NOT been able to get Windows to install to it. I spent an hour and a half today with OWC tech support and we verified that it is working but I cannot get Windows installed to it. This is the error message I receive...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.