@tedyun Thanks for the EFI tip. It worked though why is something I can’t understand. It booted up the build nicely and allowed the install to complete. Now when I swap back to the xfx 6600xt and old EFI, it goes to black when login pages is supposed to be displayed. I still have the agdpmod =...
Hi. I just tried to update my setup from 13.2.1 to 13.3 and now it's stuck. I have previously updated with no issues.
I have attached some pictures of the verbose lines before the hangup. together with a snapshot of my EFI folder contents and config.plist
My setup
Gigabyte z370 Gaming X
i9...
Just to chime in..
Managed to swap my RX580 to XFX RX6600XT QICK 308. Installed without a hitch. Just added added "adgpmod=pikera" to the boot-args and reboot with new card.
Pretty much plug and play.
OS Monterey 12.4
I tried to update my Clover from v4690 to the current rev5122. While I noticed it booted fine, the system will reboot or hang after each time it woke from sleep.
I observed the boot sequence and noticed the following lines in the verbose feed.
Lilu patcher: @ failed to solve...
Success!
Tried the combo link in the first post but it gave me an error at the target HDD page saying that my High Sierra did not meet the requirements.
Went to the App Store Update and updated from there. Completed smoothly. Running happily now.
Hi.. From my experience..
I updated Clover (5118) and some of the kext files and found that sleep stopped working. On further checks, I found that the SSDT-UIAC was not being loaded and this probably was one of the issues causing the sleep.
In short, I reverted to the kext from RehabMans...
Updated my setup (ASROCK Z77 pro 3 with i7-3770 imac14,2)using the combo update.
Edited the NVDAStartupWeb.kext to change the NVDARequiredOS to 17D102 before running the combo pkg.
This worked before to allow me to boot then install the latest web driver, strangely, not this time.
However...
Multibeast 10.0 worked for me.. mostly..
It installed all the necessary kexts. Only the HDD won't boot by itself despite many times installing the UEFI Boot with the Multibeast. Its probably some issues with the ASROCK Z77 UEFI that won't allow it to boot or point at the wrong boot partition...
OK I seem to have fixed it by using the Lilu.kext and NvidiaGraphicsFixup.kext into EFI/Clover/kexts/Other
Odd I thought that this was for Nvidia cards 7xx and above.
I am glad its fixed though..
FIXED..
Hi;
My setup is ASROCK Z77Pro3 i7-3770 with GTX670 running three monitors, one on HD4000 and two on the GTX670. They have been working fine for the past few years up till now.
I installed the combo update for 10.12.5 couple of days back and that started the problem.
The HD4000 is...
@Misfire Thank you for the tip! I have removed the FileNVRAM and it managed to update successfully....
Now... back to trying to get the iMessage working.
I am having some issues installing the OS X 10.10.5
I have used the combo updater as well as the appstore. both gives the same issue.
What happens is when the update restarts the computer, it freezes with a KP and the install stops.
Reseting and it boots up again in 10.10.3 and no install...
AsRock z77Pro3 i7-3770 installed via Appstore. All Ok after patching Audio.
Only issue was trying to use the Combo install. It refused to install indicating that my volume's requirements was not met and won't install. Odd. Thats a first.
App store was ok so thats fine
Hi
I hope someone can help.. I have been having these random system crashes/freezes in Yosemite and have been trying to find the culprit.. I found that the Quicklooksatellite is having issue when it accesses and previews Office files (doc, docx, xld,xlsx). Not all of them.
It will sometime...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.