- Joined
- Dec 31, 2013
- Messages
- 27
- Motherboard
- Gigabyte Z390 GAMING X
- CPU
- i9-9900K
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
I tried to update my Clover from v4690 to the current rev5122. While I noticed it booted fine, the system will reboot or hang after each time it woke from sleep.
I observed the boot sequence and noticed the following lines in the verbose feed.
Lilu patcher: @ failed to solve __ZN31AppleIntelFramebufferController17IsTypeConlySystemEv, err2
WhateverGreen igfx: @ failed to route IstypeCOnlySystem
.....
[IGPU] Graphics driver failed to load: could not register with Framebuffer driver!
So I reverted back to the EFI folder from rev4690 and all was fine again.
I experimented various versions of the Clover available online eg 5104, 5108, 5111, 5116, 5117, 5118, 5119, 5120.
It seems that there is a difference at 5116 to 5117 that allows the frame buffer to be loaded correctly. Everything from 5117 upwards did not work correctly and gave the same error.
These are what I tried with the versions above 5117, remove the ig-platform-id (currently set at 59120003) and remove inject Intel. >> No good
So I tried to swap out the BOOTX64.efi while maintaining CLOVERX64 at rev5122. That also works when the BOOTX64 is returned to rev5116. Sleep and wake is fine and frame buffer is loaded correctly.
I also updated WEG and Lilu to the latest version with no changes either. Still having the same issue with BOOTX64 above 5117.
Perhaps some of you who have better knowledge of whats under the hood of clover can help
- Is it OK to mix BOOTX64 with another version of CLOVERx64?
- What is the cause of this "TypeC system" error? Did I miss some new settings?
- Why does the BOOTX64 cause the framebuffer NOT to be loaded?
My config.plist is attached.
My setup:
- z370 with i7-8770k
- High Sierra 10.13.6
- RX580 with 1x 4k and 2x HD monitors
- imac18,3
- boot arguments: -v darkwake =10 -disablegxffirmware
Thanks in advance..
I observed the boot sequence and noticed the following lines in the verbose feed.
Lilu patcher: @ failed to solve __ZN31AppleIntelFramebufferController17IsTypeConlySystemEv, err2
WhateverGreen igfx: @ failed to route IstypeCOnlySystem
.....
[IGPU] Graphics driver failed to load: could not register with Framebuffer driver!
So I reverted back to the EFI folder from rev4690 and all was fine again.
I experimented various versions of the Clover available online eg 5104, 5108, 5111, 5116, 5117, 5118, 5119, 5120.
It seems that there is a difference at 5116 to 5117 that allows the frame buffer to be loaded correctly. Everything from 5117 upwards did not work correctly and gave the same error.
These are what I tried with the versions above 5117, remove the ig-platform-id (currently set at 59120003) and remove inject Intel. >> No good
So I tried to swap out the BOOTX64.efi while maintaining CLOVERX64 at rev5122. That also works when the BOOTX64 is returned to rev5116. Sleep and wake is fine and frame buffer is loaded correctly.
I also updated WEG and Lilu to the latest version with no changes either. Still having the same issue with BOOTX64 above 5117.
Perhaps some of you who have better knowledge of whats under the hood of clover can help
- Is it OK to mix BOOTX64 with another version of CLOVERx64?
- What is the cause of this "TypeC system" error? Did I miss some new settings?
- Why does the BOOTX64 cause the framebuffer NOT to be loaded?
My config.plist is attached.
My setup:
- z370 with i7-8770k
- High Sierra 10.13.6
- RX580 with 1x 4k and 2x HD monitors
- imac18,3
- boot arguments: -v darkwake =10 -disablegxffirmware
Thanks in advance..