- Joined
- Jul 23, 2021
- Messages
- 34
- Motherboard
- Asus X99 Deluxe
- CPU
- E5-2695 V4
- Graphics
- 2x RX Vega 64
- Mac
Thank you for attaching the SSDT - unfortunately it didn't do much to help the situation. My drive wasn't detected after replugging (initially after boot it was detected) and as for the missing properties.. well.. they're still missing. I've attached the IORegistryExplorer once again with the new SSDT so that you can have a poke around and see what's going on. Also attached is the IORegistryExplorer dump after the drive had been replugged in, in case this highlights any issues. It's important to note that at this stage I still haven't created a USB map for this system, but it shouldn't matter as this is dealing with thunderbolt devices.@HumerousGorgon,
Thank you for the kind words and good to see you were able to flash the GC-Titan Ridge! Although the Thunderbolt SSDT is being injected, a number of important device properties for the Thunderbolt Native Host Interface (NHI) are missing:
View attachment 553543
Is it possible that you're booting from the wrong EFI partition? If there are multiple boot drives, it would be good to check BIOS --> Boot to ensure that the right disk has Boot Priority 1.
I have also attached a new Thunderbolt SSDT this is a drop-in replacement for the existing one. It may also be worth switching to this.
As for boot order, the only drive in the system is the one with the correct EFI. If there is anything else I can do to assist in your problem solving process, please let me know. Is it worth it to try the pin3/5 bridge and remove the thunderbolt header?