- Joined
- Jul 12, 2016
- Messages
- 3,095
- Motherboard
- Gigabyte Z370 Gaming 5
- CPU
- i9-9900K
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
Ok, so here is the latest... First off, I do in fact have the DP pass-thru option under TB security. Alas, it made no difference when attempting to boot. Disabling iGPU also made no difference as I would still get the 5 beeps from the motherboard telling me there is no display. The only thing that did work was using the DP from the GPU to my UHD monitor. Then using TB from TR to 4K UltraFine then looped out to my TS3 Plus dock. I tested without WEG, but I was only able to get the UHD DP (GPU) monitor to activate. I also tested this with the Pike R black screen patch, but it was still a no go. TB bus was always detected along with the UltraFine monitor, but it would not activate without WEG. I can live with this configuration, but my quest still remains... all video over TB. For my machine, it does not matter what I have plugged into the Titan Ridge card, if there's no monitor plugged directly in to the GPU, the Aorus Master does not detect a display. Again, this is not the behavior with non-patched Titan Ridge firmware. I can run everything over TB without issue.
Well I have patched TR and I just rebooted with nothing but the two pass threw DP plugged into the titan ridge and it booted perfectly fine. I really have no idea why your system believes that you do not have a monitor plugged in because pass threw is just that it passes the signal threw.
The pike R patch likely does not work because well you are on a VII, and if WEG is working cool. Why do you need a DP monitor to pass threw the thunderbolt? I really have no clue as to why I can make everything go threw the Titan Ridge without issue. I also tried with only USB-C ---> HDMI plugged in with nothing in the video card but the bridge cables.
PS are you using the THB_C header? Or are you doing 3-->5 pin bridge?
Last edited: