Last login: Sat Feb 18 22:26:15 on console
Murats-Mac:~ muratozgul$ sudo -s
Password:
bash-3.2# chown -R 0:0 ~/Desktop/AppleIntelInfo.kext
bash-3.2# chmod -R 755 ~/Desktop/AppleIntelInfo.kext
bash-3.2# kextload ~/Desktop/AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat
AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0x73cca848bb (12 MHz)
MWAIT C-States...........................: 1319200
Processor Brandstring....................: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
Processor Signature..................... : 0x506E3
------------------------------------------
- Family............................... : 6
- Stepping............................. : 3
- Model................................ : 0x5E (94)
Model Specific Registers (MSRs)
------------------------------------------
MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF80BD158B00
------------------------------------------
- Core Count........................... : 4
- Thread Count......................... : 8
MSR_PLATFORM_INFO................(0xCE) : 0x80838F1012800
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x28 (4000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 0 (only base TDP level available)
- Maximum Efficiency Ratio............. : 8
- Minimum Operating Ratio.............. : 8
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x0
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x0
- C-state Range........................ : 0 (C-States not included, I/O MWAIT redirection not enabled)
IA32_MPERF.......................(0xE7) : 0x3D49A8F0EC
IA32_APERF.......................(0xE8) : 0x4091C93D01
MSR_FLEX_RATIO...................(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.............(0x198) : 0x2B2100002C00
------------------------------------------
- Current Performance State Value...... : 0x2C00 (4400 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
- Target performance State Value....... : 0x2C00 (4400 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
- High-Temperature Interrupt Enable.... : 0 (disabled)
- Low-Temperature Interrupt Enable..... : 0 (disabled)
- PROCHOT# Interrupt Enable............ : 0 (disabled)
- FORCEPR# Interrupt Enable............ : 0 (disabled)
- Critical Temperature Interrupt Enable : 1 (enabled)
- Threshold #1 Value................... : 0
- Threshold #1 Interrupt Enable........ : 0 (disabled)
- Threshold #2 Value................... : 0
- Threshold #2 Interrupt Enable........ : 0 (disabled)
- Power Limit Notification Enable...... : 0 (disabled)
IA32_THERM_STATUS................(0x19C) : 0x88470000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 71
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x64140D
------------------------------------------
- Turbo Attenuation Units.............. : 13 (122.1 micro-Seconds)
- Temperature Target................... : 100
- TCC Activation Offset................ : 0
MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
- EIST Hardware Coordination........... : 1 (hardware coordination disabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2C2C2C2C
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C02.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C03.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C04.......... : 2C (4400 MHz)
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
- Power Policy Preference...............: 1 (highest performance)
MSR_POWER_CTL....................(0x1FC) : 0x2C005F
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFFF001BFFFF
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 0 (disabled)
- Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x3E85B91
------------------------------------------
- Total Energy Consumed................ : 4001 Joules (Watt = Joules / seconds)
MSR_PKG_POWER_INFO...............(0x614) : 0x2F8
------------------------------------------
- Thermal Spec Power................... : 95 Watt
- Minimum Power........................ : 0
- Maximum Power........................ : 0
- Maximum Time Window.................. : 0
MSR_PP0_POWER_LIMIT..............(0x638) : 0x0
MSR_PP0_ENERGY_STATUS............(0x639) : 0x287A270
------------------------------------------
- Total Energy Consumed................ : 2590 Joules (Watt = Joules / seconds)
MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0
MSR_PP1_POWER_LIMIT..............(0x640) : 0x0
MSR_PP1_ENERGY_STATUS............(0x641) : 0x2115B
------------------------------------------
- Total Energy Consumed................ : 8 Joules (Watt = Joules / seconds)
MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
- Priority Level....................... : 24
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)
MSR_PPERF........................(0x64E) : 0x3E4592F87A
------------------------------------------
- Hardware workload scalability........ : 267455232122
MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x0
HDC Supported
IA32_PKG_HDC_CTL.................(0xDB0) : 0x0
IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)
IA32_THREAD_STALL................(0xDB2) : 0x0
MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0
MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0
MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0
IA32_TSC_DEADLINE................(0x6E0) : 0x73E408DB67
MSR_PPERF........................(0x63E) : 0x1 (38)
IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)
IA32_HWP_CAPABILITIES............(0x771) : 0x109282C
-----------------------------------------
- Highest Performance.................. : 44
- Guaranteed Performance............... : 40
- Most Efficient Performance........... : 9
- Lowest Performance................... : 1
IA32_HWP_INTERRUPT...............(0x773) : 0x1
------------------------------------------
- Guaranteed Performance Change........ : 1 (Interrupt generated on change of)
- Excursion Minimum.................... : 0 (Interrupt generation disabled)
IA32_HWP_REQUEST................(0x774) : 0x20002C01
-----------------------------------------
- Minimum Performance................. : 1
- Maximum Performance................. : 44
- Desired Performance................. : 0
- Energy Efficient Performance........ : 32
- Activity Window..................... : 0, 0
- Package Control..................... : 0
IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
- Guaranteed Performance Change....... : 0 (has not occured)
- Excursion To Minimum................ : 0 (has not occured)
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 40 (4000 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)
IGPU Info:
------------------------------------------
IGPU Current Frequency...................: 0 MHz
IGPU Minimum Frequency...................: 350 MHz
IGPU Maximum Non-Turbo Frequency.........: 350 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: 1150 MHz
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 42 (44) ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 4 6 7 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]