Contribute
Register

Skylake HWP Enable

Status
Not open for further replies.
rocccky said:
WOW ... this increases my aftereffects rendertimes alot ... awesome .. thank you so much.

offtopic. is it possible to show the OC in "about my mac"? i tried the sdtPRGen.sh script method with added "-turbo 4400" but it is not shown up. maybe i set something wrong?
Click to expand...
You do not wrong. About this mac infos sometimes are cosmetic. Install Hardware Sensors with Multibeast and you will see real hardware stats instantly.
 
telepati said:
I made it but I am not sure it is working. It says HWP enabled and supported but many things show disabled and unsupported. Could you please check my result is working or not?

Code: 
Last login: Sat Feb 18 22:26:15 on console
Murats-Mac:~ muratozgul$ sudo -s
Password:
bash-3.2# chown -R 0:0 ~/Desktop/AppleIntelInfo.kext
bash-3.2# chmod -R 755 ~/Desktop/AppleIntelInfo.kext
bash-3.2# kextload ~/Desktop/AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0x73cca848bb (12 MHz)
MWAIT C-States...........................: 1319200

Processor Brandstring....................: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz

Processor Signature..................... : 0x506E3
------------------------------------------
- Family............................... : 6
- Stepping............................. : 3
- Model................................ : 0x5E (94)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF80BD158B00
------------------------------------------
- Core Count........................... : 4
- Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x80838F1012800
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x28 (4000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 0 (only base TDP level available)
- Maximum Efficiency Ratio............. : 8
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x0
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x0
- C-state Range........................ : 0 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x3D49A8F0EC
IA32_APERF.......................(0xE8)  : 0x4091C93D01

MSR_FLEX_RATIO...................(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.............(0x198) : 0x2B2100002C00
------------------------------------------
- Current Performance State Value...... : 0x2C00 (4400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
- Target performance State Value....... : 0x2C00 (4400 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
- High-Temperature Interrupt Enable.... : 0 (disabled)
- Low-Temperature Interrupt Enable..... : 0 (disabled)
- PROCHOT# Interrupt Enable............ : 0 (disabled)
- FORCEPR# Interrupt Enable............ : 0 (disabled)
- Critical Temperature Interrupt Enable : 1 (enabled)
- Threshold #1 Value................... : 0
- Threshold #1 Interrupt Enable........ : 0 (disabled)
- Threshold #2 Value................... : 0
- Threshold #2 Interrupt Enable........ : 0 (disabled)
- Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88470000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 71
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x64140D
------------------------------------------
- Turbo Attenuation Units.............. : 13 (122.1 micro-Seconds)
- Temperature Target................... : 100
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
- EIST Hardware Coordination........... : 1 (hardware coordination disabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2C2C2C2C
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C02.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C03.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C04.......... : 2C (4400 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
- Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2C005F
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFFF001BFFFF
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 0 (disabled)
- Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x3E85B91
------------------------------------------
- Total Energy Consumed................ : 4001 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x2F8
------------------------------------------
- Thermal Spec Power................... : 95 Watt
- Minimum Power........................ : 0
- Maximum Power........................ : 0
- Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x287A270
------------------------------------------
- Total Energy Consumed................ : 2590 Joules (Watt = Joules / seconds)

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x2115B
------------------------------------------
- Total Energy Consumed................ : 8 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
- Priority Level....................... : 24

MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)

MSR_PPERF........................(0x64E) : 0x3E4592F87A
------------------------------------------
- Hardware workload scalability........ : 267455232122

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x0
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x73E408DB67
MSR_PPERF........................(0x63E) : 0x1 (38)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x109282C
-----------------------------------------
- Highest Performance.................. : 44
- Guaranteed Performance............... : 40
- Most Efficient Performance........... : 9
- Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x1
------------------------------------------
- Guaranteed Performance Change........ : 1 (Interrupt generated on change of)
- Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x20002C01
-----------------------------------------
- Minimum Performance................. : 1
- Maximum Performance................. : 44
- Desired Performance................. : 0
- Energy Efficient Performance........ : 32
- Activity Window..................... : 0, 0
- Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
- Guaranteed Performance Change....... : 0 (has not occured)
- Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 40 (4000 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  350 MHz
IGPU Maximum Non-Turbo Frequency.........:  350 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: 1150 MHz

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 42 (44) ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 4 6 7 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
Click to expand...
I think you have other configs for CPU. Please make sure don't use ssdt or other settings for CPU. This is my Clover settings for working HWP:
 

Attachments

  • Képernyőfotó 2017-02-18 - 21.37.50.png
    Képernyőfotó 2017-02-18 - 21.37.50.png
    455.3 KB · Views: 2,574
  • Képernyőfotó 2017-02-18 - 21.38.26.png
    Képernyőfotó 2017-02-18 - 21.38.26.png
    607.1 KB · Views: 2,499
Last edited:
Anybody tried this on Kaby Lake? :?:
 
I have tried with my build and had similar results than with my orginnal SSDT-i7-6700K.aml
 
kolyapatrik said:
I think you have other configs for CPU. Please make sure don't use ssdt or other settings for CPU. This is my Clover settings for working HWP:
Click to expand...

I forgot to remove SSDT.aml here is the new result; Now it look works much proper but I can't see X86PlatformPlugin anymore inside of the ioreg, I can see now ACPI_SMC_PlatformPlugin, is that normal? are you using SSDT or any patch for X86PlatformPlugin? or do I need it?

Code: 
Last login: Sun Feb 19 20:07:30 on console
Murats-Mac:~ muratozgul$ sudo -s
Password:
bash-3.2# chown -R 0:0 ~/Desktop/AppleIntelInfo.kext
bash-3.2# chmod -R 755 ~/Desktop/AppleIntelInfo.kext
bash-3.2# kextload ~/Desktop/AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0xe2e9fb1987 (24 MHz)
MWAIT C-States...........................: 1319200

Processor Brandstring....................: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz

Processor Signature..................... : 0x506E3
------------------------------------------
- Family............................... : 6
- Stepping............................. : 3
- Model................................ : 0x5E (94)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF80B89AC000
------------------------------------------
- Core Count........................... : 4
- Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x80838F1012800
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x28 (4000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 0 (only base TDP level available)
- Maximum Efficiency Ratio............. : 8
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x0
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x0
- C-state Range........................ : 0 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x44C2D44C84
IA32_APERF.......................(0xE8)  : 0x4329B89C1C

MSR_FLEX_RATIO...................(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.............(0x198) : 0x2B3D00002C00
------------------------------------------
- Current Performance State Value...... : 0x2C00 (4400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
- Target performance State Value....... : 0x2C00 (4400 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
- High-Temperature Interrupt Enable.... : 0 (disabled)
- Low-Temperature Interrupt Enable..... : 0 (disabled)
- PROCHOT# Interrupt Enable............ : 0 (disabled)
- FORCEPR# Interrupt Enable............ : 0 (disabled)
- Critical Temperature Interrupt Enable : 1 (enabled)
- Threshold #1 Value................... : 0
- Threshold #1 Interrupt Enable........ : 0 (disabled)
- Threshold #2 Value................... : 0
- Threshold #2 Interrupt Enable........ : 0 (disabled)
- Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88450000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 69
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x64140D
------------------------------------------
- Turbo Attenuation Units.............. : 13 (122.1 micro-Seconds)
- Temperature Target................... : 100
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
- EIST Hardware Coordination........... : 1 (hardware coordination disabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2C2C2C2C
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C02.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C03.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C04.......... : 2C (4400 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
- Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2C005F
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFFF001BFFFF
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 0 (disabled)
- Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x5F26D5F
------------------------------------------
- Total Energy Consumed................ : 6089 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x2F8
------------------------------------------
- Thermal Spec Power................... : 95 Watt
- Minimum Power........................ : 0
- Maximum Power........................ : 0
- Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x33CC688
------------------------------------------
- Total Energy Consumed................ : 3315 Joules (Watt = Joules / seconds)

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x3A0C8
------------------------------------------
- Total Energy Consumed................ : 14 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
- Priority Level....................... : 24

MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)

MSR_PPERF........................(0x64E) : 0x4038B624C4
------------------------------------------
- Hardware workload scalability........ : 275829368004

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x0
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0xE2F424A46B
MSR_PPERF........................(0x63E) : 0x1 (38)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x109282C
-----------------------------------------
- Highest Performance.................. : 44
- Guaranteed Performance............... : 40
- Most Efficient Performance........... : 9
- Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x1
------------------------------------------
- Guaranteed Performance Change........ : 1 (Interrupt generated on change of)
- Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x20002C01
-----------------------------------------
- Minimum Performance................. : 1
- Maximum Performance................. : 44
- Desired Performance................. : 0
- Energy Efficient Performance........ : 32
- Activity Window..................... : 0, 0
- Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
- Guaranteed Performance Change....... : 0 (has not occured)
- Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 40 (4000 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................: 1050 MHz
IGPU Minimum Frequency...................:  350 MHz
IGPU Maximum Non-Turbo Frequency.........:  350 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: 1150 MHz

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (9) 39 44 ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 4 5 ]
CPU P-States [ (9) 21 39 44 ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 3 4 5 7 ]
CPU P-States [ (9) 10 21 39 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 21 34 39 (44) ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 9 10 21 34 38 39 (41) 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 15 21 (22) 34 38 39 41 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 15 21 22 27 34 38 39 41 (44) ] iGPU P-States [ ]
CPU P-States [ 9 10 15 (17) 21 22 27 34 38 39 41 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 15 17 21 22 25 27 (29) 34 38 39 41 44 ] iGPU P-States [ ]
CPU P-States [ (9) 10 12 15 17 21 22 25 27 29 34 38 39 41 44 ] iGPU P-States [ ]
bash-3.2#

Screen Shot 2017-02-19 at 20.18.41.png


Screen Shot 2017-02-19 at 20.19.11.png


Screen Shot 2017-02-19 at 20.46.07.png
 
Last edited:
geekbench cpu 3,6ghz.png This is using the hip and air freq. CPU clover setting @3600
geekbench hwp 3.2ghz.png This is with HWP ARTfreq. CPU clover setting 0000, and 0x20002401.
Geekbench hwp 00.png This is with HWP ARTFreq. clover CPU 000000, and 0x00002401

Skylake i5 6500 (3.2-3.6 ghz). 0x2000(24)01. 24=3600 mhz.
 
Pentium G3258 w/RX 480
GA-H97-D3H |  Pentium G3258 |  Radeon Other
iMac 17.1 w/RX480
GA-Z170M-D3H |  i5 6500 |  Radeon Other
telepati said:
I forgot to remove SSDT.aml here is the new result; Now it look works much proper but I can't see X86PlatformPlugin anymore inside of the ioreg, I can see now ACPI_SMC_PlatformPlugin, is that normal? are you using SSDT or any patch for X86PlatformPlugin? or do I need it?

Code: 
Last login: Sun Feb 19 20:07:30 on console
Murats-Mac:~ muratozgul$ sudo -s
Password:
bash-3.2# chown -R 0:0 ~/Desktop/AppleIntelInfo.kext
bash-3.2# chmod -R 755 ~/Desktop/AppleIntelInfo.kext
bash-3.2# kextload ~/Desktop/AppleIntelInfo.kext
bash-3.2# cat /tmp/AppleIntelInfo.dat

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1

Warning: Clover hw.busfrequency error detected : 17d78400
InitialTSC...............................: 0xe2e9fb1987 (24 MHz)
MWAIT C-States...........................: 1319200

Processor Brandstring....................: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz

Processor Signature..................... : 0x506E3
------------------------------------------
- Family............................... : 6
- Stepping............................. : 3
- Model................................ : 0x5E (94)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF80B89AC000
------------------------------------------
- Core Count........................... : 4
- Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x80838F1012800
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x28 (4000 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 0 (only base TDP level available)
- Maximum Efficiency Ratio............. : 8
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x0
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x0
- C-state Range........................ : 0 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x44C2D44C84
IA32_APERF.......................(0xE8)  : 0x4329B89C1C

MSR_FLEX_RATIO...................(0x194) : 0xE0000

MSR_IA32_PERF_STATUS.............(0x198) : 0x2B3D00002C00
------------------------------------------
- Current Performance State Value...... : 0x2C00 (4400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
- Target performance State Value....... : 0x2C00 (4400 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
- High-Temperature Interrupt Enable.... : 0 (disabled)
- Low-Temperature Interrupt Enable..... : 0 (disabled)
- PROCHOT# Interrupt Enable............ : 0 (disabled)
- FORCEPR# Interrupt Enable............ : 0 (disabled)
- Critical Temperature Interrupt Enable : 1 (enabled)
- Threshold #1 Value................... : 0
- Threshold #1 Interrupt Enable........ : 0 (disabled)
- Threshold #2 Value................... : 0
- Threshold #2 Interrupt Enable........ : 0 (disabled)
- Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x88450000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 69
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x64140D
------------------------------------------
- Turbo Attenuation Units.............. : 13 (122.1 micro-Seconds)
- Temperature Target................... : 100
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
- EIST Hardware Coordination........... : 1 (hardware coordination disabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2C2C2C2C
------------------------------------------
- Maximum Ratio Limit for C01.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C02.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C03.......... : 2C (4400 MHz)
- Maximum Ratio Limit for C04.......... : 2C (4400 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
- Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x2C005F
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFFF001BFFFF
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 0 (disabled)
- Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x5F26D5F
------------------------------------------
- Total Energy Consumed................ : 6089 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x2F8
------------------------------------------
- Thermal Spec Power................... : 95 Watt
- Minimum Power........................ : 0
- Maximum Power........................ : 0
- Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x33CC688
------------------------------------------
- Total Energy Consumed................ : 3315 Joules (Watt = Joules / seconds)

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x3A0C8
------------------------------------------
- Total Energy Consumed................ : 14 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
- Priority Level....................... : 24

MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)

MSR_PPERF........................(0x64E) : 0x4038B624C4
------------------------------------------
- Hardware workload scalability........ : 275829368004

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x0
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0xE2F424A46B
MSR_PPERF........................(0x63E) : 0x1 (38)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x109282C
-----------------------------------------
- Highest Performance.................. : 44
- Guaranteed Performance............... : 40
- Most Efficient Performance........... : 9
- Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x1
------------------------------------------
- Guaranteed Performance Change........ : 1 (Interrupt generated on change of)
- Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x20002C01
-----------------------------------------
- Minimum Performance................. : 1
- Maximum Performance................. : 44
- Desired Performance................. : 0
- Energy Efficient Performance........ : 32
- Activity Window..................... : 0, 0
- Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
- Guaranteed Performance Change....... : 0 (has not occured)
- Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 40 (4000 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................: 1050 MHz
IGPU Minimum Frequency...................:  350 MHz
IGPU Maximum Non-Turbo Frequency.........:  350 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: 1150 MHz

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (9) 39 44 ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 4 5 ]
CPU P-States [ (9) 21 39 44 ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 3 4 5 7 ]
CPU P-States [ (9) 10 21 39 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 21 34 39 (44) ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 9 10 21 34 38 39 (41) 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 15 21 (22) 34 38 39 41 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 15 21 22 27 34 38 39 41 (44) ] iGPU P-States [ ]
CPU P-States [ 9 10 15 (17) 21 22 27 34 38 39 41 44 ] iGPU P-States [ ]
CPU P-States [ 9 10 15 17 21 22 25 27 (29) 34 38 39 41 44 ] iGPU P-States [ ]
CPU P-States [ (9) 10 12 15 17 21 22 25 27 29 34 38 39 41 44 ] iGPU P-States [ ]
bash-3.2#

View attachment 237121

View attachment 237122

View attachment 237126
Click to expand...
No, just remove them. Clear Plugin type config under SSDT section. Just leave blank.
Working? :)
 
kolyapatrik said:
No, just remove them. Clear Plugin type config under SSDT section. Just leave blank.
Working? :)
Click to expand...

I did, but still don't see X86PlatformPlugin in my ioreg. I attached ioreg, config and SSDTs could you please check it and tell me what is wrong?
 

Attachments

  • Archive.zip
    769.3 KB · Views: 199
telepati said:
I did, but still don't see X86PlatformPlugin in my ioreg. I attached ioreg, config and SSDTs could you please check it and tell me what is wrong?
Click to expand...

Did you check your Clover EFI folder in ACPI/Origin and Patched? This is a different ACPI than the config.plist and is where your generated SSDTs end up. Clover boot loader usually defaults with 2-4 in that folder, you have to remove them manually. Of course, if you did a PRGen ssdt creation then you already know that, but I thought I would put it out there for others.
EFI ACPI folder.png
 

Attachments

  • EFI ACPI folder.png
    EFI ACPI folder.png
    1.1 MB · Views: 987
Pentium G3258 w/RX 480
GA-H97-D3H |  Pentium G3258 |  Radeon Other
iMac 17.1 w/RX480
GA-Z170M-D3H |  i5 6500 |  Radeon Other
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top