- Joined
- Mar 18, 2017
- Messages
- 1,031
- Motherboard
- ASUS ROG Rampage VI Extreme
- CPU
- i9-7940X
- Graphics
- 2 X VEGA 56
- Mac
- Mobile Phone
Today Amazon should deliver an M-Audio Air 192/6 to my door, I bought it to replace my old little USB preamp for my guitar. Hopefully the KP will not be present on USB interface, but I'll keep watching this on future betas.
Generally speaking, it's still correct now to say that Z390 (maybe Z490, too) is a better suitable and more compatible/stable platform for hacks with iMac SMBIOS than X299 on iMacPro1,1 / MacPro7,1 ? 10700K seems to be a little bad boy at his price point ;-)View attachment 485994
Instead of him using Device Properties he using SSDT instead, thought the whole idea with OpenCore was to help lower the number of SSDTs used in ACPI and use OpenCore features instead?
I finally installed Catalina and ... wow ... everything went right on the first try !!! I would like to thank you all and in particular @djlild7hina and @izo1 for your support.
now I am trying to tune the beast and here the doubts begin again...
1) my PCIe devices are
SLOT 1 Radeon VII
SLOT 2 Titan Ridge
SLOT 3 HighPoint RocketRAID 2840A controller (16xSATA max)
SLOT 4 WiFi/BT card
SLOT 5 HighPoint 7101A-1 4 x NVMe controller
SLOT 6 2 x USB 3.0 card (the only one present on the motherboard I used to connect a USB hub ...)
TB was flashed ad now I have to edit DROM
HighPoint card in SLOT 5 is a 16x controller, but the system sees it as 8x. Moreover, the RAID I installed (2 x Sabrent Rocket Q 4TB = 8TB) works much slower than expected. Is there something that I have to do with OpenCore settings? Or with BIOS settings?
More generally, I still have difficulty understanding how to set the right values for "DeviceProperties" for my specific hack. About this, I read a few times the Dortania guide and the Acidanthera PDF too, but the "DeviceProperties" section seems to be related only to iGPUs and to audio settings ...
2) my system NVMe SSDs (2 x Sabrent Rocket 1TB each one) are placed in M2_1 (macOS) and M2_2 (Windows 10)
M2_1 slot turned out to be the fastest one. I tried to clone the Catalina SSD to one SSD on the HighPoint NVMe RAID controller. It worked fine, but it was much slower than the same SSD put in M2_1 slot and so I reverse to 1st solution. Frankly I don't know how to interpret these differences in performance, considering my mobo has 48 lines ...
You did Apple software RAID? It sounds like you created one with the two M.2 slots on the motherboard. As @djlild7hina said, the bottom one is on the chipset whereas the other is on the CPU. You need both on CPU-connected PCI-e for a fast SSD RAID. I'd recommend moving the SSD that's in the PCH slot to the PCI-e that has the Wifi card now, using an M.2 adapter card, and then going to M.2 wifi that's installed in a motherboard slot.
edit: oh, or! another solution that's pretty nifty: https://www.amazon.com/dp/B07MCL16M8/?tag=tonymacx86com-20
So you put the HighPoint RAID card, which will need to go into a 16x slot, which you already have in Slot 3 and Slot 5, respectively, and they both support 16x. You might want to try Slot 7 for the RAID card?
Also if you are filling up all the other NVMe slots that are onboard as well, you might be maxing out the PCIe lanes for the whole system and the BIOS throttles the PCIe 16x card down to 8x.
The new 10core iMac is a really good value and performance if you need a real Mac and those comps have the 10xxx CPUs. The 10 core is faster than the 10/12 core iMac Pro it seems (especially single core performance).
If you are a professional audio person like this guy that requires high end PCIe cards, then a Mac Pro (2019) would be more suitable for a real Mac.
For X299 I suggest MacPro7,1, which is what I've been using for a while with zero issues.
Also myself and a few other people were very early adopters of OpenCore and it was messy back then, now it's much much better and not all over the place like before. Of course it still requires knowledge to edit the config manually, but the documentation and tutorials are really good by now.
I'm personally a graphic design professional (more on the high end motion graphics side) and personally just need many fast cores and a lot of RAM for all the Adobe apps to be open (I use almost all of them at the same time). I love how snappy the 18core Hackintosh is for my day to day work...however, time is money for me and I think I could live with a 10core iMac for now until the Mac Pro has better specs at the base level. I can easily afford a $15,000 Mac Pro but I don't see why I would get it if maybe new Intel CPUs are around the corner, and let's not forget ARM and where Apple is headed with the Mac. I think I will just get a 10 core iMac for now and part out the Hackintosh, unless someone buys this thing i spent hundreds of hours if not thousand to perfect haha.
Now I have two problems to solve
1) Titan Ridge - a) I flashed the card with @CaseySJ "GC-TITAN-RIDGE-NVM23-Elias64Fr.bin" firmware. 2) I installed the TTR on slot2 3) I activated the related BIOS section 4) I edited the DROM and created the SSDT-TBOLT3.aml
Now seeing apple system info I have this situation
View attachment 486145
View attachment 486146
View attachment 486147
what did i do wrong? I attach my SSDT
2) when the monitor goes into standby, moving the mouse or digit something on the keyboard don't not wake the monitor until after several attempts ...
Now I have two problems to solve
1) Titan Ridge - a) I flashed the card with @CaseySJ "GC-TITAN-RIDGE-NVM23-Elias64Fr.bin" firmware. 2) I installed the TTR on slot2 3) I activated the related BIOS section 4) I edited the DROM and created the SSDT-TBOLT3.aml
Now seeing apple system info I have this situation
View attachment 486145
View attachment 486146
View attachment 486147
what did i do wrong? I attach my SSDT
2) when the monitor goes into standby, moving the mouse or digit something on the keyboard don't not wake the monitor until after several attempts ...
Maybe you need :