- Joined
- Apr 5, 2018
- Messages
- 86
- Motherboard
- Z490 Phan ITX/TB3
- CPU
- i9-10900K
- Graphics
- RX 5600 XT
- Mac
Hello,
Problem: Randomly after waking from Sleep, USB storage devices are improperly ejected. Only USB 3.0 storage devices re-connect automatically, with USB 2.0 storage devices requiring the device to be physically unplugged and replugged. Duration of sleep does not appear to matter: Testing has been done at 10 second, 1 minute, 5 minute, 15 minute, and 1 hour intervals. Each have resulted in passes and fails.
Current hardware:
Attempted Solutions:
------------------------
Anybody have any ideas what I can try from here?
I am quite stumped. Searching these forums and r/Hackintosh has yet to uncover anything new that I haven't tried. Thanks all!!!
Problem: Randomly after waking from Sleep, USB storage devices are improperly ejected. Only USB 3.0 storage devices re-connect automatically, with USB 2.0 storage devices requiring the device to be physically unplugged and replugged. Duration of sleep does not appear to matter: Testing has been done at 10 second, 1 minute, 5 minute, 15 minute, and 1 hour intervals. Each have resulted in passes and fails.
Current hardware:
- Intel i9-9900k (stock speed)
- ASRock Z390 Phantom Gaming ITX/ac
- 64GB 3200MHz RAM (XMP Profile 1)
- 2TB Samsung Pro 960 M.2
- Sapphire Pulse RX 5600 XT 6GB
- macOS Catalina 10.15.4 clean install
- Opencore 0.5.7
- BIOS: XHCI-Handoff -> Enabled
- BIOS: 4G Decoding -> Enabled
- 8GB USB 2.0 HP thumb drive
- 64GB USB 3.0 SanDisk thumb drive
- 1TB Samsung T1
- 1TB Samsung T5
- 1TB SanDisk SATA -> USB 3.0 enclosure
Attempted Solutions:
- USBInjectAll.kext + SSDT-UIAC.aml (tried with USB 2.0 HSxx ports set to both 0x00 and 0x03 for UsbConnector)
- Disabled all C-states except C0 and C1E in the BIOS
- Enabled/Disabled Energy Saver -> "Put Hard Drives To Sleep When Possible"
- Enabled/Disabled Energy Saver ->"Power Nap"
- Enabled/Disabled Energy Saver ->"Wake for Ethernet Network Access"
- Set "pmset hibernatemode" to 0, 3, and 25
- Set "pmset gpuswitch" to 1 and 2
- Set "pmset proximitywake" to 0 and 1
- Set "pmset standby" to 0 and 1
------------------------
Anybody have any ideas what I can try from here?
I am quite stumped. Searching these forums and r/Hackintosh has yet to uncover anything new that I haven't tried. Thanks all!!!