- Joined
- Jul 23, 2011
- Messages
- 29
- Motherboard
- Gigabyte z390 Designare
- CPU
- i9-9900K
- Graphics
- Vega 56
- Mobile Phone
Hello I don't think is chrome just fini
Hello
same problem this time just dragging icons to the task bar .
See attachment
Hello I don't think is chrome just fini
Hello
I tried changing slots and the issue is still happening with all bluetooth devices. Thank you thoughPlease try this:
listen something with your AirPods Pro connected to your Hackintosh and put your hand on your hear. If you lost the sound but the AirPods Pro is still connected do nexts
1) In sound preferences change Input to something else than AirPods Pro.
View attachment 485971
2) Change Fenvi Slot
Please try the following:
Use only the video ports on your RX 580.
- First, connect only the new Philips monitor to HDMI (disconnect the older one).
- Does it sleep and wake properly?
- Now connect only the old Philips monitor (disconnect the new one).
- Does it sleep and wake properly?
- Now connect old monitor to HDMI and new monitor to DisplayPort.
- Does the system sleep and wake properly?
P.S. How do you like the Philips 4K monitor? Is there a fair bit of backlight bleed on black or dark screens? Are the speaker loud enough?
Hello,I tried changing slots and the issue is still happening with all bluetooth devices. Thank you though
do you have the full filename? The one i used was TitanRidgeNVM23-E64FrI really wouldn’t know for sure which one.. chances are though that in June / July it would be the Elias64 version from here.
Process of Elimination may need to be attempted. Suggestions:Hello I don't think is chrome just fini
Hello
same problem this time just dragging icons to the task bar .
See attachment
Thanks for the reminder posts -- once again this is a model for how problems and follow-ups should be reported!Hello Casey. Sorry for the delayed response. It took me a while to get the old monitor back for testing. It seems, like we can rule out the dual monitor setup as a cause of the issue. I've tried all 3 bullet points and the result is the same - the computer goes to sleep, wakes (LED is on, fans are spinning) but the displays are staying black. I used only RX 580 ports.
What else can I try?
Just a reminder of the issue, here's a list of links where it was discussed:
One thing to add is I've noticed that after adding and then removing bluetooth drivers as discussed in "Clarifications of the problem", I can see a crossed out bluetooth icon in the dock (which I don't remember being present there before the manipulations with the bluetooth driver. Not sure if this could be somehow related.
I'm not an expert on monitors, so I didn't notice any issues. I've just checked on a completely black image (full screen, in a dark room). I did notice some bleeding around the edges, but I definitely wouldn't call it unbearable. I'm not experiencing any issues during the normal use. The speakers are loud enough for voice calls and watching youtube music, but obviously the sound is rather flat and not really appropriate for quality music listening. A cool thing is since I have two of those monitors, I joined the audio of both, so I'm getting a kind of stereo effect, which is not bad for monitor sound
TitanRidgeNVM23-E64Fr is bit-for-bit identical to GC-TITAN-RIDGE-NVM23-Elias64Fr.bin in the Repository.do you have the full filename? The one i used was TitanRidgeNVM23-E64Fr
Please see this post and let us know if the problem persists:Hi, I am running Opencore 0.6.0 on Mojave 10.14.6 on Z390 Designare and my second ethernet port i219 is not working. I read the post 24235 https://www.tonymacx86.com/threads/...olt-3-i7-9700k-amd-rx-580.267551/post-2159065 but I was unable to get it to work. Can someone explain how to enable Mausi 1.02 to work on Opencore to get my Intel I219 to work? Thanks