- Joined
- May 15, 2020
- Messages
- 1,342
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i9-9900KF
- Graphics
- RX 5700 XT
- Mac
Hell i don't knew that making TB working on Hacki is difficult like thisPlease try the attached file. This version modifies the fewest bytes. Depending on outcome, we may try another version. After flashing the firmware, please do this:
After adding the attached SSDT and flashing the firmware, perform two COLD boots as follows:
- Disable the ACPI renames:
- RP09._INI to RP09.XINI
- _L6F to XL6F
- Disable the previous SSDT:
- SSDT-TbtOnPch-ThinkPad-X1.aml
- Use only the attached SSDT (and SSDT-DTPG.aml):
- SSDT-Z390-TB3HP-DROM.aml
- With no TB3 devices attached. Check System Information --> Thunderbolt.
- Do you see Thunderbolt Bus?
- If so, hot-plug the TB3 device. Does it connect and work?
- With TB3 device attached. Check System Information --> Thunderbolt.
- Do you see Thunderbolt Bus?
- If so, does it work?
Thank you for your Thread, only your content and your help convinced me to build my first Hackintosh