- Joined
- Mar 26, 2020
- Messages
- 37
- Motherboard
- Gigabyte Z390 Designare
- CPU
- Intel i9 9900K
- Graphics
- Sapphire Nitro+ RX 580 8GB
- Mac
- Mobile Phone
Thank you! Just finished, it boots without any issue!That was quick! Good job. Let's do this:
- Mount EFI partition of the macOS SSD and copy the SMBIOS and RtVariables sections from existing config.plist into the config.plist of USB flash disk. Probably the easiest way to do this is with ProperTree or a text editor like BBEdit. This will ensure that existing serial numbers are preserved.
- Then reboot again with USB flash disk (by pressing F12 at BIOS splash screen) to confirm that everything is still okay.
- Now shutdown, flip power switch on PSU back to OFF.
- Reinstall the AMD GPU.
- Connect monitor to AMD GPU (disconnect it from on-board HDMI).
- Power on the system.
- Press F12 again at BIOS splash screen and choose USB disk.
- At Clover Boot Menu, boot macOS normally again.
- Does it boot?
The only difference I saw in the first place is that I need tot sign in again with my iCloud account.
I double checked the serial number to see if it is preserved and if it matched the one from my iCloud acccount and it is the same.