- Joined
- Jul 10, 2013
- Messages
- 395
- Motherboard
- Gigabyte X299X Designare 10G
- CPU
- i9-10900X
- Graphics
- RX 5500 XT
- Mac
- Classic Mac
- Mobile Phone
See Post #1 and #2 here:Therefore, after backing up the system, I should:
- Install macOS Catalina in the second APFS Volume
- Reboot into macOS Mojave
- Mount the EFI partition and replace the EFI folder with the one provided in your macOS Catalina installation guide
- Copy ALL Hackintosh kexts from /Library/Extensions to EFI/CLOVER/kexts/Other
- Delete all hackintosh kexts in /Library/Extensions and run Kext Utility to rebuild Mojave's kernel cache.
- Reboot
Sorry but I would like to be sure I understood correctly: I should copy ALL the hackintosh kexts in /Library/Extensions, (including AHCI_3rdParty_eSATA.kext, AHCI_3rdParty_SATA.kext, FakePCIID_Intel_GbX.kext, FakePCIID.kext and all the FakeSMC _ *** Sensors.kext)?
Looking forward to it!@CaseySJ I can confirm that the firmware you shared with me for on board Titan Ridge on the X299X Designare 10G is working as expected! I will post actual files soon, (the whole procedure had to be done remotely and don't have access to the machine in question right now)
Bravo !
Hello @ncrispi,hi @CaseySJ
not sure if you were able to look over my post number #17,169, but I have gone over all of your guides for wakeups and nothing seems to be working :/ do you have any idea what I might be missing
Clover and 10.15.4 updates not playing nice....
I have a solid CCC backup with EFI partition and most recent kexts in c/o folder ... I'm stuck on what to try next
- Attempts to update to from clover 5104 to 5107 are throwing a CLOVERX64.efi not found error
- Attempts to update to 10.15.4 hang at the apple logo with no progress bar (I've let it it >30 mins)
- You may try this approach to update Clover.
- However, I've found that latest Clover isn't necessarily the cure. I had more luck after clearing NVRAM by pressing F11 at Clover Boot Menu.
Clover won't provide any response to F11; it will silently clear NVRAM. I have two Designare Z390 systems, and the update experience on them was different:I've pressed F11 when clover is asking for a boot volume and I don't get any kind of feedback or response to indicate that the NVRAM was reset, so I? I also haven't moved to native NVRAM as of yet if that matters?
I have a TB3>2 adapter going into a Corning optical TB2 cable (33’) into another TB3>2 adapter that connects to my Apollo. So the adapter is def not an issue.
Have you considered trying the Titan Ridge card?
I’ll take a look at your EFI this weekend but I am no SSDT expert - I just matched the port from ioregexplorer into the SSDT and that’s it. Please post your ioregexplorer results when you search ‘thunder’ WITHOUT any TB SSDT and a screenshot or photo of you TB bios settings and I will do my best!
edit: I forgot to mention (since I seldom do this): 1 out of every 5 times if I shut down my Apollo while the machine is running, everything freezes completely and I have to hard reset. Most of the time, it’s just like in the video I posted