Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

CaseySJ said:
By the way, which device path properties are you injecting via this method? Based on the quoted/linked article below, it seems some properties cannot be obtained any other way except through this method, such as ThunderboltDROM. But our recent tests show that when TNODE/TBUS appear, the Thunderbolt DROM we inject through Clover is in fact used...

Click to expand...
Currently I use Clover method inject for simplifying properties modifications.. BUT the other method which consist in writing all properties on native NVRAM is also operate.
On this article, I think there is partial informations,
What I understand : For ThunderboltDROM on rMac, parameter is empty on Thunderbolt firmware (like we can see on Mac-xx.bin firmware) and Apple use a custom protocol to make it (an EFI freeform file with GUID 5E7BE016-33CF-2D42-8758-C69FA5CDBB2F contain Thunderbolt DROM base depending on Mac model and complete it with ThunderboltSwitchUID .. and probably other unknown data ..

Capture d’écran 2020-01-28 à 13.13.10.png

Capture d’écran 2020-01-28 à 13.30.30.png


UPDATED :

Capture d’écran 2020-01-28 à 14.18.19.png

Capture d’écran 2020-01-28 à 14.30.40.png
 
Last edited:
BUT...

I don't think the system is truly and completely hanged. Instead:
  • The GUI hangs. No mouse movement. No keyboard input. Nothing on the GUI changes (e.g. time/clock on menu bar does not change).
  • Then if I unplug the Thunderbolt device and do a hard-reboot, I see ACPILogs corresponding to that unplug -- even though GUI was frozen.
  • So internal low-level (interrupt-driven) tasks still seem to be running.
  • I will re-check this as well by doing multiple plug-unplug-plug-unplug and then checking the ACPIDebug log after hard reboot.
Click to expand...


When I ran CaseySJ's earlier 3 Stage test -- which I reported earlier -- when I removed the TB3 SSD in Stage 2 the GUI was frozen as predicted. However, at that point the disk activity light was flashing. Some tasks were apparently continuing to run.
 
Super Hack
Z390 DESIGNARE |  i9 9900K |  RX 580 Pulse 8GB
@Elias64Fr,

Test:
  • Connect USB 3.1 Gen 1 device
  • Thunderbolt BIOS parameters modified
  • Using attached TbtOnPch
  • Using attached SSDT-UIAC... which adds HS08 and HS13
Result:

USB 3.1 Gen 1 device fully operational. Connected before booting. Hot plug or unplug causes system hang. Disk icon appears on desktop. Can read and write files.
Screen Shot 2020-01-28 at 4.26.09 AM.png
Code: 
Timestamp                       (process)[PID]  
2020-01-28 04:23:52.859747-0800  localhost kernel[0]: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.2.
2020-01-28 04:23:52.859853-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x54039854
2020-01-28 04:23:52.859922-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe00e4000
2020-01-28 04:23:52.859990-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0600000
2020-01-28 04:23:52.860056-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0700000
2020-01-28 04:23:52.860124-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0708000
2020-01-28 04:23:52.860190-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0710000
2020-01-28 04:23:52.860258-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0720000
2020-01-28 04:23:52.860323-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0800000
2020-01-28 04:23:52.860388-0800  localhost kernel[0]: (kernel) ACPIDebug: "_INI Root Port"
2020-01-28 04:23:52.860454-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICMBoot"
2020-01-28 04:23:52.860520-0800  localhost kernel[0]: (kernel) ACPIDebug: "Tbt TWIN set to One"
2020-01-28 04:23:52.860586-0800  localhost kernel[0]: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
2020-01-28 04:23:52.860825-0800  localhost kernel[0]: (kernel) ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
2020-01-28 04:23:52.860892-0800  localhost kernel[0]: (kernel) ACPIDebug: "Delay to appear = 185 us"
2020-01-28 04:23:52.860957-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICMS"
2020-01-28 04:23:52.861022-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_0="
2020-01-28 04:23:52.861087-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xffffffff
2020-01-28 04:23:52.861152-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI called"
2020-01-28 04:23:52.861218-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI RP OK!"
2020-01-28 04:23:52.861432-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI UPSB OK!"
2020-01-28 04:23:52.861499-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
2020-01-28 04:23:52.861565-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
2020-01-28 04:23:52.861633-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
2020-01-28 04:23:52.861699-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
2020-01-28 04:23:52.861764-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI DPs done"
2020-01-28 04:23:52.861830-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI0 all done"
2020-01-28 04:23:52.861896-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI End"
2020-01-28 04:23:52.861961-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_1="
2020-01-28 04:23:52.862026-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a1
2020-01-28 04:23:52.862092-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_2="
2020-01-28 04:23:52.862156-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a1
2020-01-28 04:23:52.862221-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_3="
2020-01-28 04:23:52.862287-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a7
2020-01-28 04:23:52.862351-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800003f5
2020-01-28 04:23:52.862416-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_4="
2020-01-28 04:23:52.862481-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a7
2020-01-28 04:23:52.862546-0800  localhost kernel[0]: (kernel) ACPIDebug: "ISTA="
2020-01-28 04:23:52.862611-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800003f5
2020-01-28 04:23:52.862677-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configuration delay = 1004 ms"
2020-01-28 04:23:52.907617-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS0 RP05"
2020-01-28 04:23:52.907987-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCEU RP05"
2020-01-28 04:23:52.908218-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCEU RP05- Put upstream bridge back into D0 "
2020-01-28 04:23:52.952107-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS0 UPSB"
2020-01-28 04:23:52.952514-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB"
2020-01-28 04:23:52.952950-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED - enable GPIO"
2020-01-28 04:23:52.953368-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-28 04:23:52.953696-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-01-28 04:23:52.954012-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-01-28 04:23:52.954113-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-01-28 04:23:52.954317-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-01-28 04:23:52.954729-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-01-28 04:23:52.954924-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-28 04:23:52.955019-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
2020-01-28 04:23:52.955299-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- restored flag, THUNDERBOLT_PCI_LINK_MGMT_DEVICE.PRSR"
2020-01-28 04:23:52.955667-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x0
2020-01-28 04:23:52.956170-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- Wait for config space..."
2020-01-28 04:23:52.956494-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- Read VID/DID =0000000015EA8086"
2020-01-28 04:23:52.956870-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value1"
2020-01-28 04:23:52.957247-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034021
2020-01-28 04:23:52.957750-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Write Value1"
2020-01-28 04:23:52.958037-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034021
2020-01-28 04:23:52.958136-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value2"
2020-01-28 04:23:52.958213-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034021
2020-01-28 04:23:52.958285-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Success"
2020-01-28 04:23:52.958355-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value1"
2020-01-28 04:23:52.958424-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034121
2020-01-28 04:23:52.958493-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Write Value1"
2020-01-28 04:23:52.958562-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034121
2020-01-28 04:23:52.958630-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value2"
2020-01-28 04:23:52.958699-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034121
2020-01-28 04:23:52.958769-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Success"
2020-01-28 04:24:00.550228-0800  localhost kernel[0]: (kernel) ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
2020-01-28 04:24:00.550686-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-01-28 04:24:00.553796-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS3 DSB0"
2020-01-28 04:24:00.553876-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0"
2020-01-28 04:24:00.553955-0800  localhost kernel[0]: (kernel) ACPIDebug: "POFF DSB0"
2020-01-28 04:24:00.554034-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-01-28 04:24:00.554113-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-01-28 04:24:00.554192-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-01-28 04:24:00.554271-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0 - NHI0 not present"
2020-01-28 04:24:00.554349-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
2020-01-28 04:24:00.554427-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-28 04:24:00.554505-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-01-28 04:24:00.554584-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-01-28 04:24:00.554663-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-01-28 04:24:00.554742-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-01-28 04:24:00.554821-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
2020-01-28 04:24:00.554900-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-28 04:24:00.554979-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
 

Attachments

  • SSDT-TbtOnPch-Designare_Draft07-Fixed-SSPs.aml
    21.5 KB · Views: 104
  • SSDT-UIAC-DESIGNARE-Z390-V7-HS08-HS13.aml
    846 bytes · Views: 92
hello again, I came across a problem yesterday where the progress bar gets stuck one third of the way after booting from the Catalina usb drive. This is a fresh install to Catalina. I've managed to record the codes and attach a few snaps where I think the problem(s) might be. There are a number of 'failed to's and 'couldn't's so I presume I'll need to do some problem solving here. I'll try and dig deeper but please let me know if you see anything in the codes. Thank you
 

Attachments

  • IMG_8593.00_00_04_00.Still001.jpg
    IMG_8593.00_00_04_00.Still001.jpg
    349.1 KB · Views: 73
  • IMG_8593.00_07_32_16.Still002.jpg
    IMG_8593.00_07_32_16.Still002.jpg
    404.2 KB · Views: 67
  • IMG_8593.00_07_32_22.Still003.jpg
    IMG_8593.00_07_32_22.Still003.jpg
    433.9 KB · Views: 80
  • IMG_8593.00_07_32_27.Still004.jpg
    IMG_8593.00_07_32_27.Still004.jpg
    441 KB · Views: 67
  • IMG_8593.00_07_33_06.Still005.jpg
    IMG_8593.00_07_33_06.Still005.jpg
    288.7 KB · Views: 97
  • IMG_8593.00_07_33_19.Still006.jpg
    IMG_8593.00_07_33_19.Still006.jpg
    200.2 KB · Views: 79
NCMacGuy said:
When I ran CaseySJ's earlier 3 Stage test -- which I reported earlier -- when I removed the TB3 SSD in Stage 2 the GUI was frozen as predicted. However, at that point the disk activity light was flashing. Some tasks were apparently continuing to run.
Click to expand...
@CaseySJ @NCMacGuy
Is there a CPU overload with rising fan speed or something like that ?
 
Elias64Fr said:
@CaseySJ @NCMacGuy
Is there a CPU overload with rising fan speed or something like that ?
Click to expand...
In my case the CPU/fans remain very quiet.
  • I have three PWM (4-pin) fans connected to three motherboard headers.
    • One is BeQuiet! low-noise fan.
    • Two are Noctua low-noise fans.
  • During BIOS/Clover, the three fans are spinning at high RPM (more noise).
  • But as soon as macOS boots up, all three fan RPMs are reduced and are nearly silent.
  • So macOS is controlling the fans...
    • Latest VirtualSMC inserts IOReg entries for fans.

Screen Shot 2020-01-28 at 4.45.43 AM.png
Screen Shot 2020-01-28 at 4.42.56 AM.png
 
CaseySJ said:
@Elias64Fr,

Test:
  • Connect USB 3.1 Gen 1 device
  • Thunderbolt BIOS parameters modified
  • Using attached TbtOnPch
  • Using attached SSDT-UIAC... which adds HS08 and HS13
Result:

USB 3.1 Gen 1 device fully operational. Connected before booting. Hot plug or unplug causes system hang. Disk icon appears on desktop. Can read and write files.
View attachment 447107
Code: 
Timestamp                       (process)[PID]
2020-01-28 04:23:52.859747-0800  localhost kernel[0]: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.2.
2020-01-28 04:23:52.859853-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x54039854
2020-01-28 04:23:52.859922-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe00e4000
2020-01-28 04:23:52.859990-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0600000
2020-01-28 04:23:52.860056-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0700000
2020-01-28 04:23:52.860124-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0708000
2020-01-28 04:23:52.860190-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0710000
2020-01-28 04:23:52.860258-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0720000
2020-01-28 04:23:52.860323-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xe0800000
2020-01-28 04:23:52.860388-0800  localhost kernel[0]: (kernel) ACPIDebug: "_INI Root Port"
2020-01-28 04:23:52.860454-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICMBoot"
2020-01-28 04:23:52.860520-0800  localhost kernel[0]: (kernel) ACPIDebug: "Tbt TWIN set to One"
2020-01-28 04:23:52.860586-0800  localhost kernel[0]: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
2020-01-28 04:23:52.860825-0800  localhost kernel[0]: (kernel) ACPIDebug: "Up Stream VID/DID =0000000015EA8086"
2020-01-28 04:23:52.860892-0800  localhost kernel[0]: (kernel) ACPIDebug: "Delay to appear = 185 us"
2020-01-28 04:23:52.860957-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICMS"
2020-01-28 04:23:52.861022-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_0="
2020-01-28 04:23:52.861087-0800  localhost kernel[0]: (kernel) ACPIDebug: 0xffffffff
2020-01-28 04:23:52.861152-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI called"
2020-01-28 04:23:52.861218-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI RP OK!"
2020-01-28 04:23:52.861432-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI UPSB OK!"
2020-01-28 04:23:52.861499-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
2020-01-28 04:23:52.861565-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
2020-01-28 04:23:52.861633-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
2020-01-28 04:23:52.861699-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
2020-01-28 04:23:52.861764-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI DPs done"
2020-01-28 04:23:52.861830-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI0 all done"
2020-01-28 04:23:52.861896-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI End"
2020-01-28 04:23:52.861961-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_1="
2020-01-28 04:23:52.862026-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a1
2020-01-28 04:23:52.862092-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_2="
2020-01-28 04:23:52.862156-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a1
2020-01-28 04:23:52.862221-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_3="
2020-01-28 04:23:52.862287-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a7
2020-01-28 04:23:52.862351-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800003f5
2020-01-28 04:23:52.862416-0800  localhost kernel[0]: (kernel) ACPIDebug: "ICME_4="
2020-01-28 04:23:52.862481-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800001a7
2020-01-28 04:23:52.862546-0800  localhost kernel[0]: (kernel) ACPIDebug: "ISTA="
2020-01-28 04:23:52.862611-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x800003f5
2020-01-28 04:23:52.862677-0800  localhost kernel[0]: (kernel) ACPIDebug: "Configuration delay = 1004 ms"
2020-01-28 04:23:52.907617-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS0 RP05"
2020-01-28 04:23:52.907987-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCEU RP05"
2020-01-28 04:23:52.908218-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCEU RP05- Put upstream bridge back into D0 "
2020-01-28 04:23:52.952107-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS0 UPSB"
2020-01-28 04:23:52.952514-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB"
2020-01-28 04:23:52.952950-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED - enable GPIO"
2020-01-28 04:23:52.953368-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-28 04:23:52.953696-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-01-28 04:23:52.954012-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-01-28 04:23:52.954113-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-01-28 04:23:52.954317-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-01-28 04:23:52.954729-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-01-28 04:23:52.954924-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-28 04:23:52.955019-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
2020-01-28 04:23:52.955299-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- restored flag, THUNDERBOLT_PCI_LINK_MGMT_DEVICE.PRSR"
2020-01-28 04:23:52.955667-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x0
2020-01-28 04:23:52.956170-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- Wait for config space..."
2020-01-28 04:23:52.956494-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- Read VID/DID =0000000015EA8086"
2020-01-28 04:23:52.956870-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value1"
2020-01-28 04:23:52.957247-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034021
2020-01-28 04:23:52.957750-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Write Value1"
2020-01-28 04:23:52.958037-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034021
2020-01-28 04:23:52.958136-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value2"
2020-01-28 04:23:52.958213-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034021
2020-01-28 04:23:52.958285-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Success"
2020-01-28 04:23:52.958355-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value1"
2020-01-28 04:23:52.958424-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034121
2020-01-28 04:23:52.958493-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Write Value1"
2020-01-28 04:23:52.958562-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034121
2020-01-28 04:23:52.958630-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Read Value2"
2020-01-28 04:23:52.958699-0800  localhost kernel[0]: (kernel) ACPIDebug: 0x4034121
2020-01-28 04:23:52.958769-0800  localhost kernel[0]: (kernel) ACPIDebug: "CRMW Success"
2020-01-28 04:24:00.550228-0800  localhost kernel[0]: (kernel) ACPIDebug: "RTPC NHI0 called with arg: 0000000000000000"
2020-01-28 04:24:00.550686-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-01-28 04:24:00.553796-0800  localhost kernel[0]: (kernel) ACPIDebug: "_PS3 DSB0"
2020-01-28 04:24:00.553876-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0"
2020-01-28 04:24:00.553955-0800  localhost kernel[0]: (kernel) ACPIDebug: "POFF DSB0"
2020-01-28 04:24:00.554034-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-01-28 04:24:00.554113-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-01-28 04:24:00.554192-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-01-28 04:24:00.554271-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0 - NHI0 not present"
2020-01-28 04:24:00.554349-0800  localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
2020-01-28 04:24:00.554427-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-01-28 04:24:00.554505-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-01-28 04:24:00.554584-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-01-28 04:24:00.554663-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-01-28 04:24:00.554742-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-01-28 04:24:00.554821-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
2020-01-28 04:24:00.554900-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-01-28 04:24:00.554979-0800  localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on"
Click to expand...
Interresting ! System hang with only XHC2 and Hot-plugging ! Some problem with Hotplug ! Could you temporarily remove _E17 from SSDT, boot on same set-up .. We normally disable hot plug

AND another test with NO devices connected, and verify Power state on XHC2 controller :
Capture d’écran 2020-01-28 à 13.52.16.png
 
Last edited:
HackDeMac said:
hello again, I came across a problem yesterday where the progress bar gets stuck one third of the way after booting from the Catalina usb drive. This is a fresh install to Catalina. I've managed to record the codes and attach a few snaps where I think the problem(s) might be. There are a number of 'failed to's and 'couldn't's so I presume I'll need to do some problem solving here. I'll try and dig deeper but please let me know if you see anything in the codes. Thank you
Click to expand...
It seem that there is some problem with com.apple.driver.X86PlatformShim included on CPU0 and related to CPU plugin-type for CPU PM
 
Elias64Fr said:
Interresting ! System hang with only XHC2 and Hot-plugging ! Some problem with Hotplug ! Could you temporarily remove _E17 from SSDT, boot on same set-up .. We normally disable hot plug

AND another test with NO devices connected, and verify Power state on XHC2 controller :
View attachment 447114
Click to expand...
Two Test Conditions:

1. With _E17 still present (same as before).
IMG_0276.JPG IMG_0277.JPG

2. With _E17 empty (method still present, but calls to AMPE and UMPE removed).
  • Booted with USB 3.1 Gen 1 flash disk and Apple TB3 GigE adapter both connected before boot.
  • Both devices disabled after booting.
  • Then hot-unplugged the GigE adapter. No hang!
  • Suddenly USB 3.1 Gen 1 flash disk mounted and works fully!
  • Then hot-plugged the GigE adapter. No hang!
  • But USB 3.1 Gen 1 flash disk unmounted after 5-10 seconds and notification appeared: "Disk Not Ejected Properly"
  • Then hot-unplugged the GigE adapter. No hang!
  • Now USB 3.1 Gen 1 flash disk reappeared! And still works.
  • (But GigE device does not work.)

Update:
  • Have to stop here now. Can continue this evening.
  • Will get USB Power State of XHC2 in the evening.
 
Last edited:
manfriday said:
yeah, you will want to disable CFG-Lock for openCore too.
If you have a nvram.plist file you probably either still have the old rc scripts running or OpenCores LogoutHook



Just mount your EFI volume, remove the EFI folder containing OpenCore, and reinstall Clover.
If you have LogoutHook running you will want to get rid of that too.

You dont need to reinstall macOS.
When I am playing around with Boot Loaders, I like to install them to USB flash drives and make sure I can boot from them. Once I know that boots OK, I will copy the EFI folder from the flash drive to the EFI volume on my main boot drive.
Click to expand...
I am booting OC and F9b without setting CFG-Lock and NVRAM seems to work fine. Is that unexpected?
 
Last edited:
1.
GA-Z97X-SLI |  i7 4770K |  RX 580 Pulse 8GB
2.
Z390 DESIGNARE |  i7 9700K |  Vega 64 8GB
3.
Prime Z490-A |  i9 10850K |  Radeon RED Dragon RX 580 8GB
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top