- Joined
- Oct 4, 2013
- Messages
- 71
- Motherboard
- GA-X79s Up5 WiFi
- CPU
- i7 3930K 4.4 ghz
- Graphics
- GTX 760
- Mac
- Classic Mac
- Mobile Phone
dear when i done installation my processor was 3.8 ghz but i didnt installed nullcpumanagemnet kest but when i installed it processor came to 3.2 but with 3.8 speed was lovely can i keep 3.8 ghz some how i m using f3 bois i dono wana go more than that can u help me
I didn't install any nullcpumanagemnet kext on my X79 UP5.
After I installed the voddo kext to enable multicore threading I rather did a custom setup in my bios (version F4) with a cpu multiplier set to 47 (so it went from 3.20 to 4.7 ghz) and a multiplier ramp on the turbo mode (make sure to set the enable/disable/auto field on AUTO) for each couple of cores.
Core 1:47
Core 2:47
Core 3:46
Core 4:46
Core 5:45
Core 6:45
Then I set the voltage cpu to 1.420 (default was set to 1.35 but it depends on what kind of PSU you have) to make the system rock stable even under high load, otherwise you might encourr on kernel panic due to the lack of power.
Hope this helps.