Stuck on Apple Logo at USB Boot

[BloodWingdAngel]

I am trying to install Yosemite on my PC as a Hackintosh. The issue is, I am getting stick at the Apple Logo screen. My specs for the PC are below...

CPU: Intel Core i7-4790K Haswell Quad-Core LGA 1150 @ 4.0GHz
CPU Fan: Cooler Master Hyper 212 EVO with ARCTIC MX-2 Thermal Paste
GPU: EVGA Nvidia GeForce GTX 970 4GB DDR5
Motherboard: Gigabyte GA-H97-D3H LGA 1150 ATX Intel Motherboard
RAM: Corsair Vengeance 16GB (2x8GB) 240-Pin DDR3 1600 Memory
PSU: SeaSonic M12II 620W ATX12V Bronze 80 PLUS PSU

I booted using -v and this is the screen it got stuck on...



Any suggestions would be very much appreciated, even if it is to get different hardware (i might not do it, but you know)

Thanks!

 

[P1LGRIM]

I am trying to install Yosemite on my PC as a Hackintosh. The issue is, I am getting stick at the Apple Logo screen. My specs for the PC are below...

CPU: Intel Core i7-4790K Haswell Quad-Core LGA 1150 @ 4.0GHz
CPU Fan: Cooler Master Hyper 212 EVO with ARCTIC MX-2 Thermal Paste
GPU: EVGA Nvidia GeForce GTX 970 4GB DDR5
Motherboard: Gigabyte GA-H97-D3H LGA 1150 ATX Intel Motherboard
RAM: Corsair Vengeance 16GB (2x8GB) 240-Pin DDR3 1600 Memory
PSU: SeaSonic M12II 620W ATX12V Bronze 80 PLUS PSU

I booted using -v and this is the screen it got stuck on...

View attachment 123313

Any suggestions would be very much appreciated, even if it is to get different hardware (i might not do it, but you know)

Thanks!

Boot with -v -x maxmem=4096 nv_disable=1


Good Luck

 

[BloodWingdAngel]

Boot with -v -x maxmem=4096 nv_disable=1


Good Luck

Thanks, it worked and I got to the installer. Now to just install it and figure out how to configure Multibeast.

Any tips anyone can offer me about what I should use under Multibeast? I heard if you do it wrong you could end up bricking the install and not being able to start, but that was just my friend who said that.