- Joined
- Feb 26, 2015
- Messages
- 47
- Motherboard
- AsRock Z390 Phantom-gaming itx/ac
- CPU
- i7-8700K
- Graphics
- Sapphire RX5700
- Mac
- Mobile Phone
Solved!
On almost all the adapters that you can buy, the manufacturer incorrectly threw the ground poligon.Therefore, you need to isolate the NGFF adapter from the BCM94360CS2 network card and from the shield that installed on the motherboard. Sometimes need to isolate all places where we must fix the card with screws, sometimes one place. All depends on which adapter you have. I draw some pics. I know that this solution worked for 8 people whom I helped set up a hackintosh. Therefore, it is highly likely that it will help you.
Top view unmounted.
Side view, with solution.
---
Hello form Belarus guys, at first sorry for my english,
I hope that somebody can help me with Bluetooth on my hackintosh.
I bought M.2 NFGG adaptor on ebay and native BCM94360CS2 network card from local shop. When I started my system after install this card my installed 10.13.6 High Sierra successfully initialized it and bluetooth worked well but i can't connect to wi-fi network – always get low signal: 97dbm.
I decided to reinstall system.
After fresh&clean installations 10.13.6 no BT on System Preferences, but after PortLimit Patch it appears. Wi-Fi fully works. Bluetooth not working – endless search and doesn't find any devices. But AirDrop works – I can see my iphone on Hakintosh-PC and hackintosh on and iphones and can swap files between devices. Airdrop stops working when I turn off Bluetooth.
I see that Bluetooth initialized on System (screens included). But can't fix it. I ask for your help, friends.
Config.plist included (serial changed)
More info on screenshots (included)
Thanks!
On almost all the adapters that you can buy, the manufacturer incorrectly threw the ground poligon.Therefore, you need to isolate the NGFF adapter from the BCM94360CS2 network card and from the shield that installed on the motherboard. Sometimes need to isolate all places where we must fix the card with screws, sometimes one place. All depends on which adapter you have. I draw some pics. I know that this solution worked for 8 people whom I helped set up a hackintosh. Therefore, it is highly likely that it will help you.
Top view unmounted.
Side view, with solution.
---
Hello form Belarus guys, at first sorry for my english,
I hope that somebody can help me with Bluetooth on my hackintosh.
I bought M.2 NFGG adaptor on ebay and native BCM94360CS2 network card from local shop. When I started my system after install this card my installed 10.13.6 High Sierra successfully initialized it and bluetooth worked well but i can't connect to wi-fi network – always get low signal: 97dbm.
I decided to reinstall system.
After fresh&clean installations 10.13.6 no BT on System Preferences, but after PortLimit Patch it appears. Wi-Fi fully works. Bluetooth not working – endless search and doesn't find any devices. But AirDrop works – I can see my iphone on Hakintosh-PC and hackintosh on and iphones and can swap files between devices. Airdrop stops working when I turn off Bluetooth.
I see that Bluetooth initialized on System (screens included). But can't fix it. I ask for your help, friends.
Config.plist included (serial changed)
More info on screenshots (included)
Thanks!
Attachments
Last edited: