Hello all,
Sorry if I have to post in this thread.
I have problem with my hackintosh installation, Mojave 10.14.4 in Z390-A Prime, i5-8400 and RX560.
I connect 1 USB 3.0 Hub, and I connect a Team SSD MS30 SATAIII with M.2 to USB3.0 converter.
I did a BlackMagic test and the result as follow. This drive are connected through the USB hub.
I have a MyBook USB3.0 hard drive connected through the back panel USB3.0 port, and the result as follow.
*just notice that, after a while of running the Disk Speed Test, I can see that the speed increase to around 100MB/s. I think this is normal?
Trying the Team SSD in the back panel USB3.0 port result as follow.
For the first test of SSD to my USB3.0 Hub, what is going on with 1MB/s on read speed? Is it because faulty USB drive?
Attached is problem reporting files.
And what I feel (might not be accurate but that is what I feel), is that my system feels laggy in its response to any command. At least, I feel that a system with i5-8400 and 32GB RAM should be faster than this.
Thank you for any advise.