Hi!
I have the following configuration
- HP EliteDesk 800 G2 TWR
- MOBO HP 8053 (U3E1)
- Intel Core i7 6700 @ 3.40GHz Skylake
- GPU: Integrated: Intel® HD Graphics 530 with (2) DisplayPorts
I am trying to make the HD530 to work and I
1. Increased the memory of the video card in the BIOS to the maximim available 512MB (gave me a KP with the default option which was 32MB)
2. installed the HD530 through multibeast 7.0.1, which changed on the config.plist of clover the following:
- `Graphics > Inject Intel`
- `Graphics > ig-platform-id 0x19120000`
- `Kernel and Kext Patches > 10.11-SKL-1912000-4_displays`
3. the last thing I did was to apply the glitch fix as it is described [here](
https://www.tonymacx86.com/threads/skylake-intel-hd-530-graphics-glitch-fix.206410/) and [here](
http://www.insanelymac.com/forum/topic/317551-glitch-fix-for-skylake-hd-graphicsupdate/)
4. `SMBIOS` is configured as `iMac17.1` (was testing it with `iMac14.1` but saw no difference)
Now when I rebooted during the boot process I get the following message (using -v) just before I get to the UI:
~~~
IG: HE PCI ACPI device not found - PAVP services will be disabled - add IMEI to EFI / ACPI device list
IG: Called when FB is in a non-wake State in getAttribute - attribute: 1734298985
IG: Called when FB is in a non-wake State in getAttribute - attribute: 1734298985
IG: Called when FB is in a non-wake State in getAttribute - attribute: 1734298985
IG: DRMStatus - iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to use the machine. but you should contact Apple.
[IGPU] Will fallback to host-side scheduling if graphics firmware fails to load
[IGPU] Chose to use graphics firmware based on platform
[IGPU] ************************************************
[IGPU] Failed to initialize graphics firmware. Failing back to host-side scheduling
[IGPU] Scheduler interface revision = 1: Default EL Scheduler
[IGPU] ************************************************
[IGPU] Graphics accelerator is using scheduler interface revision 1: Default EL Scheduler
[IGPU] Scheduler: Multiple channel indexes per command streamer
[IGPU] Scheduler: Process CSB using HWS.
[IGPU] Scheduler: PM notify enabled
[IGPU] Graphics Address: PPGTT, Separate Address Space
[IGPU] MultiForceWake Enabled: Using 3D Driver
[IGPU] Scheduler Throttle Cap = 100ms
~~~
The card seems to work with acceleration and have no glitch. And it shows in the system information as
~~~
Intel HD Graphics 530:
Chipset Model: Intel HD Graphics 530
Type: GPU
Bus: Built-In
VRAM (Dynamic, Max): 1536 MB
Vendor: Intel (0x8086)
Device ID: 0x1912
Revision ID: 0x0006
Metal: Supported
~~~
However [Cinebench](
https://www.maxon.net/en/products/cinebench/) gives me on 10.12.2 approx 26fps. The same computer under windows 10 performs much better giving approx 60fps. Same applies for [LuxRender](
http://www.luxmark.info/)
Given the message I see when booting, and the performance difference, is the HD530 working with full acceleration or not under OSX?
I have been using one monitor connected through the display port
Thanks a lot for your help!!