- Joined
- Jan 11, 2013
- Messages
- 29
- Motherboard
- Dell 0K4CNR
- CPU
- Intel Core-i5 6300
- Graphics
- Intel HD Graphics 520
- Mac
- Mobile Phone
So here goes.. I have an HP Probook 4540s currently in a dual boot with OSX 10.10.3 and Windows 7. I use Clover as a bootloader from EFI. I have created a new ext4 partition, installed Mint Linux on it and installed the Linux bootloader to the EFI partition. I can successfully boot Windows and Mac, but the linux option boots grub and then says no boot option or something like that. Can someone with much more knowledge than myself help me sort this out so I can finally finish this triple boot setup? I have been googling and been in and out of Clover configurator and looking at log files/UUID info for DAYS... The system works fine other than the fact that I can't boot linux. Please help me, you hackintosh GODS
Here is my Clover boot log:
Here if my current config.plist on the EFI partition:
Here is a screenshot of my partitions:
500GB hard drive
-200MB EFI
-250GB Mac OSX 10.10.3
-650MB Mac Recovery (I want to hide this in Clover)
-134MB Windows reserve partition
-215GB Windows 7
-34GB Mint Linux
I guess I'm too much of a noob to use Clover configurator to add the UUID to the three operating systems as bootable selections. All I want when I turn on my computer is for clover to pop up and say Mac, Windows, and Linux. And load Mac by default after 5 seconds, which it already does. I wish Clover had a **TRIPLE BOOT SECTION** where I could just link to partitions and UUID's and hit save. There is so much going on in that program, it's overwhelming. I'm lost, and I know I'm ALMOST at the finish line. Thank you 1000x in advance.
Here is my Clover boot log:
Code:
-------------------------------DATE: 2015-04-12 TIME: 20:40:00
-------------------------------
0:100 0:100 MemLog inited, TSC freq: 2394559175
0:100 0:000
0:100 0:000 Now is 12.4.2015, 20:40:24 (GMT+2047)
0:100 0:000 Starting Clover rev 3193 on HPQ EFI
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000) @B450DB18
0:100 0:000 SelfDirPath = \EFI\Boot
0:102 0:002 Total Memory Slots Count = 2
0:102 0:000 Type 17 Index = 0
0:102 0:000 Ignoring insane frequency value 0MHz
0:102 0:000 SmbiosTable.Type17->Speed = 0MHz
0:102 0:000 SmbiosTable.Type17->Size = 0MB
0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 Bottom-Slot 1(top)
0:102 0:000 Type 17 Index = 1
0:102 0:000 SmbiosTable.Type17->Speed = 1600MHz
0:102 0:000 SmbiosTable.Type17->Size = 4096MB
0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 Bottom-Slot 2(under)
0:102 0:000 Boot status=0
0:102 0:000 Clover revision: 3193 running on HP ProBook 4540s
0:102 0:000 ... with board 17F6
0:102 0:000 CPU Vendor = 756E6547 Model=306A9
0:102 0:000 The CPU not supported turbo
0:102 0:000 BrandString = Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz
0:102 0:000 MSR 0xE2 before patch 1E008404
0:102 0:000 MSR 0xE2 is locked, PM patches will be turned on
0:102 0:000 MSR 0xE4 00020414
0:102 0:000 MSR 0xCE 00080C10_E0011800
0:102 0:000 non-usable FLEX_RATIO = 110000
0:102 0:000 corrected FLEX_RATIO = 100000
0:102 0:000 MSR 0x1B0 00000000
0:102 0:000 FSBFrequency=100MHz DMIvalue=100000kHz
0:102 0:000 Corrected FSBFrequency=100MHz
0:102 0:000 Vendor/Model/Stepping: 0x756E6547/0x3A/0x9
0:102 0:000 Family/ExtFamily: 0x6/0x0
0:102 0:000 MaxDiv/MinDiv: 24.0/12
0:102 0:000 Turbo: 24/24/24/24
0:102 0:000 Features: 0xBFEBFBFF
0:102 0:000 Threads: 4
0:102 0:000 Cores: 2
0:102 0:000 FSB: 100 MHz
0:102 0:000 CPU: 2400 MHz
0:102 0:000 TSC: 2400 MHz
0:102 0:000 PIS: 400 MHz
0:102 0:000 PCI (00|00:00.00) : 8086 0154 class=060000
0:102 0:000 PCI (00|00:02.00) : 8086 0166 class=030000
0:102 0:000 Found GFX model=Intel HD Graphics 4000
0:102 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:102 0:000 PCI (00|00:16.00) : 8086 1E3A class=078000
0:102 0:000 PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:102 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:102 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300
0:102 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400
0:102 0:000 PCI (00|00:1C.02) : 8086 1E14 class=060400
0:102 0:000 PCI (00|02:00.00) : 197B 2392 class=088000
0:102 0:000 PCI (00|02:00.02) : 197B 2391 class=080501
0:102 0:000 PCI (00|02:00.03) : 197B 2393 class=088000
0:102 0:000 PCI (00|02:00.04) : FFFF FFFF class=FFFFFF
0:102 0:000 PCI (00|00:1C.03) : 8086 1E16 class=060400
0:102 0:000 PCI (00|03:00.00) : 168C 002A class=028000
0:102 0:000 PCI (00|00:1C.05) : 8086 1E1A class=060400
0:102 0:000 PCI (00|04:00.00) : 10EC 8168 class=020000
0:102 0:000 LAN 0, Vendor=10EC, MMIO=2000
0:102 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:102 0:000 PCI (00|00:1F.00) : 8086 1E59 class=060100
0:102 0:000 PCI (00|00:1F.02) : 8086 1E03 class=010601
0:102 0:000 PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:102 0:000 Clover load options size = 0 bytes
0:132 0:029 Using OEM config.plist at path: EFI\CLOVER\config.plist
0:132 0:000 EFI\CLOVER\config.plist loaded: Success
0:132 0:000 Found theme directory: Yosemite
0:146 0:013 Found theme directory: Yosemite S
0:171 0:025 Found theme directory: embedded
0:188 0:016 Found theme directory: random
0:190 0:002 Found theme directory: thinkpad
0:210 0:020 Found theme directory: gold_clover
0:229 0:019 Found theme directory: bgm256
0:260 0:030 Loading early settings
0:260 0:000 timeout set to 5
0:260 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:260 0:000 KextsToPatch: 6 requested
0:260 0:000 KextToPatch 0: AirPortBrcm4360 (Broadcom 43224 whitelist) Kext bin patch, data len: 20
0:260 0:000 KextToPatch 1: IOAHCIBlockStorage (Enable Trim on SSD) Kext bin patch, data len: 9
0:260 0:000 KextToPatch 2: AirPortBrcm4360 (Broadcom 5Ghz XT) Kext bin patch, data len: 9
0:260 0:000 KextToPatch 3: AppleIntelFramebufferCapri (Patch audio HDMI HD4000 1366x768) Kext bin patch, data len: 12
0:260 0:000 KextToPatch 4: IOBluetoothFamily (Handoff Fix) Kext bin patch, data len: 8
0:260 0:000 KextToPatch 5: AppleHDA (IDT 76D9) Kext bin patch, data len: 4
0:260 0:000 Default theme: Yosemite
0:260 0:000 Copying global patch settings
0:260 0:000 LoadDrivers() start
0:260 0:000 Loading FSInject-64.efi status=Success
0:265 0:004 Loading HFSPlus.efi status=Success
0:271 0:005 - driver needs connecting
0:271 0:000 Loading HPFanReset.efi status=Success
0:362 0:090 HPFanReset: successfully set fan control to BIOS mode.
0:362 0:000 Loading OsxAptioFixDrv-64.efi status=Success
0:362 0:000 Loading OsxFatBinaryDrv-64.efi status=Success
0:362 0:000 1 drivers needs connecting ...
0:362 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success
0:362 0:000 HFS+ driver loaded
0:362 0:000 Searching for invalid DiskIo BY_DRIVER connects:
0:362 0:000 - Handle B450D898 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362 0:000 - Handle B450D698 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362 0:000 - Handle B450D498 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362 0:000 - Handle B450D298 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362 0:000 - Handle B450D098 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:608 0:246 LoadDrivers() end
0:608 0:000 Dump SMC keys from NVRAM:
0:608 0:000 SetScreenResolution: 1024x768 - already set
0:608 0:000 Console modes reported: 4, available modes:
0:608 0:000 Mode 1: 80x25 (current mode)
0:608 0:000 Mode 3: 120x36
0:608 0:000 Mode 4: 128x40
0:608 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)
0:608 0:000 ScanSPD() start
0:609 0:000 ScanSPD() end
0:609 0:000 Get Acpi Tables List from RSDT:
0:609 0:000 Found table: FACP 17F6 len=268
0:609 0:000 Found table: HPET 17F6 len=56
0:609 0:000 Found table: APIC 17F6 len=188
0:609 0:000 Found table: MCFG 17F6 len=60
0:609 0:000 Found table: ASF! 17F6 len=165
0:609 0:000 Found table: SSDT SataAhci len=714
0:609 0:000 Found table: SSDT PtidDevc len=1162
0:609 0:000 Found table: SLIC SLIC-MPC len=374
0:609 0:000 Found table: MSDM SLIC-MPC len=85
0:609 0:000 Found table: FPDT 17F6 len=68
0:609 0:000 Found table: BGRT 17F6 len=56
0:609 0:000 Found table: SSDT Cpu0Ist len=2288
0:609 0:000 Found table: SSDT CpuPm len=2733
0:609 0:000 Calibrated TSC frequency =2394559175 =2394MHz
0:609 0:000 Loading main settings
0:609 0:000 Dropping 1 tables
0:609 0:000 Drop table 0 signature="DMAR" (52414D44)
0:609 0:000 set table: 52414D44, 0 to drop:
0:609 0:000 Config set ChassisType=0x8
0:609 0:000 found 7 volumes with blockIO
0:609 0:000 0. Volume:
0:609 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
0:638 0:028 1. Volume:
0:638 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)
0:639 0:001 Result of bootcode detection: bootable Linux (grub,linux)
0:643 0:004 This is SelfVolume !!
0:643 0:000 2. Volume:
0:643 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)
0:650 0:006 3. Volume:
0:650 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,68644A46-AFF4-4953-AFD1-7558A88995FA,0x1D1318E0,0x135F20)
0:665 0:014 4. Volume:
0:665 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,1859B364-49E6-4A67-BE0C-4C9F30E7E366,0x1D267800,0x40000)
0:666 0:001 5. Volume:
0:666 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,6470E836-EBC4-45E4-AF73-6596E4F7DF3A,0x1D2A7800,0x190AF800)
0:667 0:001 Result of bootcode detection: bootable Windows (vista,win)
0:667 0:000 6. Volume:
0:667 0:000 PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(6,GPT,37BD7C20-741C-01D0-1036-CE190E3AE800,0x36357000,0x3FEEF57)
0:692 0:025 Using theme 'bgm256' (EFI\CLOVER\themes\bgm256)
0:692 0:000 theme bgm256 defined in NVRAM found and theme.plist parsed
0:692 0:000 OS main and drive as badge
0:709 0:016 font GoB_PTMono_10W_Bevel3.png loaded from themedir
0:709 0:000 Choosing theme bgm256
0:709 0:000 Custom entries start
0:709 0:000 Custom entry 0 FullTitle:"Mac HD" Path:"\System\Library\CoreServices\boot.efi" Type:1 Flags:0x6 matching Volume:"FAD293F3-7BDB-3CCE-BD54-F02774948C44"
0:709 0:000 Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)) ... skipped
0:709 0:000 Checking volume "Mac HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)) ... skipped
0:709 0:000 Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,68644A46-AFF4-4953-AFD1-7558A88995FA,0x1D1318E0,0x135F20)) ... skipped
0:709 0:000 Custom entry 1 FullTitle:"Linux Mint" Path:"37BD7C20-741C-01D0-1036-CE190E3AE800" Type:4 Flags:0x0 matching Volume:"Linux HD"
0:709 0:000 Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)) ... skipped
0:709 0:000 Checking volume "Mac HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)) ... skipped
0:709 0:000 Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,68644A46-AFF4-4953-AFD1-7558A88995FA,0x1D1318E0,0x135F20)) ... skipped
0:709 0:000 Custom entries finish
0:709 0:000 Scanning loaders...
0:709 0:000 0: 'Whole Disc Boot' no file system
0:709 0:000 1: 'EFI'
0:733 0:023 AddLoaderEntry for Volume Name=EFI
0:866 0:132 2: 'Mac HD'
0:896 0:029 AddLoaderEntry for Volume Name=Mac HD
0:941 0:045 Check if volume Is Hibernated:
0:941 0:000 Check sleep image 'by signature':
1:017 0:075 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:017 0:000 SleepImage name from pref: ImageVolume = 'Mac HD', ImageName = '\private\var\vm\sleepimage'
1:049 0:032 Reading first 512 bytes of sleepimage ...
1:065 0:015 OurBlockIoRead: Lba=1FCB630, Offset=3F96C6000 (BlockSize=512)
1:065 0:000 sig lion: F1E0BE9D
1:065 0:000 sig snow: 0
1:065 0:000 no valid sleep image offset was found
1:065 0:000 Reading completed -> Success
1:065 0:000 sleepimage offset could not be acquired
1:065 0:000 hibernated: no - sign
1:070 0:005 Icon 17 (icons\vol_internal_hfs.icns) not found
1:070 0:000 Theme path EFI\CLOVER\themes\bgm256, ThemeDir=B3E30920
1:318 0:247 3: 'Recovery HD'
1:334 0:015 AddLoaderEntry for Volume Name=Recovery HD
1:429 0:094 4: 'Legacy HD4' no file system
1:429 0:000 5: 'Legacy HD5' no file system
1:429 0:000 6: 'Legacy HD6' no file system
1:429 0:000 Custom legacy start
1:429 0:000 Custom legacy end
1:429 0:000 Scanning legacy ...
1:429 0:000 0: 'Whole Disc Boot' (legacy) not legacy
1:429 0:000 1: 'EFI' (grub,linux) add legacy
1:437 0:008 added 'Boot Linux from EFI' OSType=0 Icon=grub,linux
1:437 0:000 2: 'Mac HD' (legacy) not legacy
1:437 0:000 3: 'Recovery HD' (legacy) not legacy
1:437 0:000 4: 'Legacy HD4' (legacy) not legacy
1:437 0:000 5: 'Legacy HD5' (vista,win) add legacy
1:443 0:006 added 'Boot Windows from Legacy HD5' OSType=2 Icon=vista,win
1:443 0:000 6: 'Legacy HD6' (legacy) not legacy
1:443 0:000 Custom tool start
1:443 0:000 Custom tool end
1:467 0:023 found tool \EFI\CLOVER\tools\Shell64U.efi
1:467 0:000 Checking EFI partition Volume 1 for Clover
1:467 0:000 Found Clover
1:467 0:000 Use anime=Anim_9_Boot_Sequence frames=64
1:468 0:001 GetEfiBootDeviceFromNvram:
1:468 0:000 efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)
1:468 0:000 Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)'
1:468 0:000 LoaderPath: '<null string>'
1:468 0:000 Guid = 8146AA76-1048-491F-9100-B8DB51C1C59E
1:468 0:000 volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)
1:468 0:000 searching for that partition
1:468 0:000 found entry 1. 'Boot Mac OS X from Mac HD', Volume 'Mac HD'
1:468 0:000 Boot redirected to Entry 1. 'Boot Mac OS X from Mac HD'
1:468 0:000 DefaultIndex=1 and MainMenu.EntryCount=11
1:468 0:000 Use anime=Anim_1_Logo frames=49
1:826 0:357 GUI ready
7:998 6:172 StartLoader() start
7:998 0:000 Finally: Bus=99773kHz CPU=2394MHz
7:998 0:000 Kernel and Kext Patches at B9DEFA30:
7:998 0:000 Allowed: y
7:998 0:000 Debug: n
7:998 0:000 KernelCpu: n
7:998 0:000 Lapic: n
7:998 0:000 Haswell-E: n
7:998 0:000 AICPUPM: y
7:998 0:000 AppleRTC: y
7:998 0:000 KernelPm: y
7:998 0:000 FakeCPUID: 0x0
7:998 0:000 ATIController: null
7:998 0:000 ATIDataLength: 0
7:998 0:000 0 Kexts to load
7:998 0:000 6 Kexts to patch
7:998 0:000 KextPatch[0]: 20 bytes, AirPortBrcm4360
7:998 0:000 KextPatch[1]: 9 bytes, IOAHCIBlockStorage
7:998 0:000 KextPatch[2]: 9 bytes, AirPortBrcm4360
7:998 0:000 KextPatch[3]: 12 bytes, AppleIntelFramebufferCapri
7:998 0:000 KextPatch[4]: 8 bytes, IOBluetoothFamily
7:998 0:000 KextPatch[5]: 4 bytes, AppleHDA
7:998 0:000 Loading boot.efi status=Success
8:176 0:177 GetOSVersion: : 10.10.3
8:176 0:000 insert table 9 for dev 0:0
8:176 0:000 insert table 9 for dev 0:0
8:176 0:000 Trusting SMBIOS...
8:176 0:000 Channels: 1
8:176 0:000 Interleave: 0 1 2 3 4 5 6 7
8:176 0:000 SMBIOS Type 17 Index = 0 => 0 0:
8:176 0:000 BANK0 DIMM0 EMPTY
8:176 0:000 partNum=AM1L16BC4R1-B1GS
8:176 0:000 SMBIOS Type 17 Index = 1 => 1 1:
8:176 0:000 BANK0 DIMM1 1600MHz 4096MB
8:176 0:000 mTotalSystemMemory = 4096
8:176 0:000 NumberOfMemoryDevices = 2
8:176 0:000 Type20[0]->End = 0x3FFFFF, Type17[1] = 0x1000
8:176 0:000 Table 131 is present, CPUType=10
8:176 0:000 Change to: 903
8:176 0:000 RSDT 0xB9FFE0AC
8:176 0:000 FADT from RSDT: 0xB9FFC000
8:176 0:000 XSDT 0xB9FFE120
8:176 0:000 FADT from XSDT: 0xB9FFC000
8:176 0:000 Xsdt reallocation done
8:176 0:000 old FADT length=10C
8:176 0:000 Found OperationRegion(GNVS, SystemMemory, B9F79918, ...)
8:176 0:000 Found OperationRegion(ASMA, SystemMemory, B9F7B018, ...)
8:176 0:000 Found OperationRegion(AF10, SystemMemory, B9F7D018, ...)
8:176 0:000 Found OperationRegion(HPDF, SystemMemory, B9F7EE18, ...)
8:176 0:000 Found OperationRegion(HPD2, SystemMemory, B99F1F18, ...)
8:176 0:000 Found OperationRegion(HPBR, SystemMemory, B9F7AF18, ...)
8:176 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
8:176 0:000 Found OperationRegion(IGDM, SystemMemory, 0, ...)
8:176 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
8:176 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
8:176 0:000 Found OperationRegion(THMR, SystemMemory, 0, ...)
8:176 0:000 Found OperationRegion(NPC2, SystemMemory, 0, ...)
8:198 0:021 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
8:213 0:014 Apply DsdtFixMask=0x00000000 old way
8:213 0:000 drop _DSM mask=0x0000
8:213 0:000 ========= Auto patch DSDT Starting ========
8:213 0:000 VideoCard devID=0x1668086
8:213 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
8:213 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE
8:213 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
8:223 0:010 Found Airport Atheros at 0x1C0003, 0x0, DeviceID=0x002A
8:224 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
8:224 0:000 first CPU found at 12EB offset 12EE
8:224 0:000 score candidate at 12E7
8:224 0:000 score inserted in acpi_cpu_score _PR_
8:224 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
within the score: _PR_
8:224 0:000 ========= Auto patch DSDT Finished ========
8:224 0:000 Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
8:224 0:000 Xsdt has tables count=13
8:224 0:000 Table: SSDT SataAhci 714 dropped
8:224 0:000 Table: SSDT PtidDevc 1162 dropped
8:224 0:000 Table: SSDT Cpu0Ist 2288 dropped
8:224 0:000 Table: SSDT CpuPm 2733 dropped
8:224 0:000 corrected XSDT length=108
8:224 0:000 Inserting ssdt.aml from EFI\CLOVER\ACPI\patched ... Success
8:242 0:017 CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
8:242 0:000 EdidDiscovered size=128
8:242 0:000 00 | 00 FF FF FF FF FF FF 00 06 AF EC 21 00 00 00 00
8:242 0:000 16 | 00 15 01 04 90 22 13 78 02 C8 95 9E 57 54 92 26
8:242 0:000 32 | 0F 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
8:242 0:000 48 | 01 01 01 01 01 01 CE 1D 56 D2 50 00 26 30 10 10
8:242 0:000 64 | 3E 00 58 C1 10 00 00 18 DF 13 56 D2 50 00 26 30
8:242 0:000 80 | 10 10 3E 00 58 C1 10 00 00 18 00 00 00 00 00 00
8:242 0:000 96 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
8:242 0:000 112 | 00 0D 39 E0 0D 3C 64 14 12 24 6F 20 20 20 00 25
8:242 0:000 Intel GFX injection not set
8:242 0:000 HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => codec not detected
8:253 0:010 LAN Controller [10EC:8168] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)
8:253 0:000 stringlength = 488
8:253 0:000 CurrentMode: Width=1024 Height=768
8:253 0:000 FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: B450D898
8:255 0:002
8:262 0:007 MSR 0x1B0 set to 00000000
8:262 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
8:262 0:000 Extra kext: EFI\CLOVER\kexts\10.10\ACPIBacklight.kext
8:276 0:013 Extra kext: EFI\CLOVER\kexts\10.10\ACPIBatteryManager.kext
8:277 0:001 Extra kext: EFI\CLOVER\kexts\10.10\ACPIPoller.kext
8:283 0:006 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext
8:297 0:013 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\ACPISensors.kext
8:298 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\CPUSensors.kext
8:298 0:000 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\GPUSensors.kext
8:300 0:002 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\LPCSensors.kext
8:308 0:007 Extra kext: EFI\CLOVER\kexts\10.10\ProBookARPT.kext
8:310 0:001 Extra kext: EFI\CLOVER\kexts\10.10\RealtekRTL8111.kext
8:314 0:004 Extra kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext
8:315 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
8:319 0:003 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
8:321 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
8:324 0:003 Custom boot is disabled
8:349 0:024 Closing log
Here if my current config.plist on the EFI partition:
Code:
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ACPI</key>
<dict>
<key>DSDT</key>
<dict>
<key>Debug</key>
<false/>
<key>DropOEM_DSM</key>
<false/>
<key>ReuseFFFF</key>
<false/>
</dict>
<key>DropTables</key>
<array>
<dict>
<key>Signature</key>
<string>DMAR</string>
</dict>
</array>
<key>SSDT</key>
<dict>
<key>DropOem</key>
<true/>
<key>Generate</key>
<false/>
</dict>
</dict>
<key>Boot</key>
<dict>
<key>Arguments</key>
<string>dart=0 kext-dev-mode=1</string>
<key>Debug</key>
<false/>
<key>Legacy</key>
<string>LegacyBiosDefault</string>
<key>Secure</key>
<false/>
<key>Timeout</key>
<integer>5</integer>
<key>XMPDetection</key>
<string>Yes</string>
</dict>
<key>Devices</key>
<dict>
<key>USB</key>
<dict>
<key>FixOwnership</key>
<false/>
<key>Inject</key>
<false/>
</dict>
</dict>
<key>GUI</key>
<dict>
<key>Custom</key>
<dict>
<key>Entries</key>
<array>
<dict>
<key>Disabled</key>
<false/>
<key>FullTitle</key>
<string>Mac HD</string>
<key>Ignore</key>
<false/>
<key>NoCaches</key>
<false/>
<key>Type</key>
<string>OSX</string>
<key>Volume</key>
<string>FAD293F3-7BDB-3CCE-BD54-F02774948C44</string>
<key>VolumeType</key>
<string>Internal</string>
</dict>
<dict>
<key>Disabled</key>
<false/>
<key>FullTitle</key>
<string>Linux Mint</string>
<key>Ignore</key>
<false/>
<key>Path</key>
<string>37BD7C20-741C-01D0-1036-CE190E3AE800</string>
<key>Type</key>
<string>Linux</string>
<key>Volume</key>
<string>Linux HD</string>
<key>VolumeType</key>
<string>Internal</string>
</dict>
</array>
</dict>
<key>Mouse</key>
<dict>
<key>DoubleClick</key>
<integer>500</integer>
<key>Enabled</key>
<false/>
<key>Mirror</key>
<false/>
<key>Speed</key>
<integer>8</integer>
</dict>
<key>Scan</key>
<true/>
<key>ScreenResolution</key>
<string>1024x768</string>
<key>Theme</key>
<string>Yosemite</string>
</dict>
<key>Graphics</key>
<dict>
<key>DualLink</key>
<integer>0</integer>
<key>Inject</key>
<dict>
<key>ATI</key>
<false/>
<key>Intel</key>
<false/>
<key>NVidia</key>
<false/>
</dict>
<key>ig-platform-id</key>
<string>0x01660003</string>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>AppleRTC</key>
<true/>
<key>AsusAICPUPM</key>
<true/>
<key>KextsToPatch</key>
<array>
<dict>
<key>Comment</key>
<string>Broadcom 43224 whitelist</string>
<key>Find</key>
<data>
TWFjLTJFNkZBQjk2NTY2RkU1OEM=
</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>
TWFjLTZGMDE1NjFFMTZDNzVEMDY=
</data>
</dict>
<dict>
<key>Comment</key>
<string>Enable Trim on SSD</string>
<key>Find</key>
<data>
QVBQTEUgU1NE
</data>
<key>Name</key>
<string>IOAHCIBlockStorage</string>
<key>Replace</key>
<data>
AAAAAAAAAAAA
</data>
</dict>
<dict>
<key>Comment</key>
<string>Broadcom 5Ghz XT</string>
<key>Find</key>
<data>
WFQAXRlUIQAA
</data>
<key>Name</key>
<string>AirPortBrcm4360</string>
<key>Replace</key>
<data>
WFQAjahetgAJ
</data>
</dict>
<dict>
<key>Comment</key>
<string>Patch audio HDMI HD4000 1366x768</string>
<key>Find</key>
<data>
BAYAAAAEAACBAAAA
</data>
<key>Name</key>
<string>AppleIntelFramebufferCapri</string>
<key>Replace</key>
<data>
BAYAAAAIAAAGAAAA
</data>
</dict>
<dict>
<key>Comment</key>
<string>Handoff Fix</string>
<key>Find</key>
<data>
SIXAdFwPt0g=
</data>
<key>Name</key>
<string>IOBluetoothFamily</string>
<key>Replace</key>
<data>
Qb4PAAAA61k=
</data>
</dict>
<dict>
<key>Comment</key>
<string>IDT 76D9</string>
<key>Find</key>
<data>
hBnUEQ==
</data>
<key>Name</key>
<string>AppleHDA</string>
<key>Replace</key>
<data>
2XYdEQ==
</data>
</dict>
</array>
</dict>
<key>SMBIOS</key>
<dict>
<key>BiosReleaseDate</key>
<string>08/08/12</string>
<key>BiosVendor</key>
<string>Apple Inc.</string>
<key>BiosVersion</key>
<string>MBP91.88Z.00D3.B08.1208081132</string>
<key>Board-ID</key>
<string>Mac-6F01561E16C75D06</string>
<key>BoardManufacturer</key>
<string>Apple Inc.</string>
<key>BoardSerialNumber</key>
<string>WF6NEWM5VD4MCUL4T</string>
<key>BoardType</key>
<integer>10</integer>
<key>ChassisAssetTag</key>
<string>MacBook-Aluminum</string>
<key>ChassisManufacturer</key>
<string>Apple Inc.</string>
<key>ChassisType</key>
<string>8</string>
<key>Family</key>
<string>MacBook Pro</string>
<key>Manufacturer</key>
<string>Apple Inc.</string>
<key>Mobile</key>
<true/>
<key>ProductName</key>
<string>MacBookPro9,2</string>
<key>SerialNumber</key>
<string>C02LMCUKDTY3</string>
<key>Trust</key>
<false/>
<key>Version</key>
<string>1.0</string>
</dict>
<key>SystemParameters</key>
<dict>
<key>InjectKexts</key>
<string>Detect</string>
</dict>
</dict>
</plist>
Here is a screenshot of my partitions:
500GB hard drive
-200MB EFI
-250GB Mac OSX 10.10.3
-650MB Mac Recovery (I want to hide this in Clover)
-134MB Windows reserve partition
-215GB Windows 7
-34GB Mint Linux
I guess I'm too much of a noob to use Clover configurator to add the UUID to the three operating systems as bootable selections. All I want when I turn on my computer is for clover to pop up and say Mac, Windows, and Linux. And load Mac by default after 5 seconds, which it already does. I wish Clover had a **TRIPLE BOOT SECTION** where I could just link to partitions and UUID's and hit save. There is so much going on in that program, it's overwhelming. I'm lost, and I know I'm ALMOST at the finish line. Thank you 1000x in advance.
Last edited: