Contribute
Register

My triple boot config.plist is messed up...

Status
Not open for further replies.
HORIZUN

HORIZUN

Joined
Jan 11, 2013
Messages
29
Motherboard
Dell 0K4CNR
CPU
Intel Core-i5 6300
Graphics
Intel HD Graphics 520
Mac
  1. MacBook Pro
Mobile Phone
  1. Android
So here goes.. I have an HP Probook 4540s currently in a dual boot with OSX 10.10.3 and Windows 7. I use Clover as a bootloader from EFI. I have created a new ext4 partition, installed Mint Linux on it and installed the Linux bootloader to the EFI partition. I can successfully boot Windows and Mac, but the linux option boots grub and then says no boot option or something like that. Can someone with much more knowledge than myself help me sort this out so I can finally finish this triple boot setup? I have been googling and been in and out of Clover configurator and looking at log files/UUID info for DAYS... The system works fine other than the fact that I can't boot linux. Please help me, you hackintosh GODS :)

Here is my Clover boot log:
Code: 
-------------------------------DATE: 2015-04-12 TIME: 20:40:00
-------------------------------
0:100  0:100  MemLog inited, TSC freq: 2394559175
0:100  0:000  
0:100  0:000  Now is 12.4.2015,  20:40:24 (GMT+2047)
0:100  0:000  Starting Clover rev 3193 on HPQ EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000) @B450DB18
0:100  0:000  SelfDirPath = \EFI\Boot
0:102  0:002  Total Memory Slots Count = 2
0:102  0:000  Type 17 Index = 0
0:102  0:000  Ignoring insane frequency value 0MHz
0:102  0:000  SmbiosTable.Type17->Speed = 0MHz
0:102  0:000  SmbiosTable.Type17->Size = 0MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 Bottom-Slot 1(top)
0:102  0:000  Type 17 Index = 1
0:102  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:102  0:000  SmbiosTable.Type17->Size = 4096MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 Bottom-Slot 2(under)
0:102  0:000  Boot status=0
0:102  0:000  Clover revision: 3193  running on HP ProBook 4540s
0:102  0:000  ... with board 17F6
0:102  0:000  CPU Vendor = 756E6547 Model=306A9
0:102  0:000  The CPU not supported turbo
0:102  0:000  BrandString = Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz
0:102  0:000  MSR 0xE2 before patch 1E008404
0:102  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:102  0:000  MSR 0xE4              00020414
0:102  0:000  MSR 0xCE              00080C10_E0011800
0:102  0:000  non-usable FLEX_RATIO = 110000
0:102  0:000  corrected FLEX_RATIO = 100000
0:102  0:000  MSR 0x1B0             00000000
0:102  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:102  0:000  Corrected FSBFrequency=100MHz
0:102  0:000  Vendor/Model/Stepping: 0x756E6547/0x3A/0x9
0:102  0:000  Family/ExtFamily: 0x6/0x0
0:102  0:000  MaxDiv/MinDiv: 24.0/12
0:102  0:000  Turbo: 24/24/24/24
0:102  0:000  Features: 0xBFEBFBFF
0:102  0:000  Threads: 4
0:102  0:000  Cores: 2
0:102  0:000  FSB: 100 MHz
0:102  0:000  CPU: 2400 MHz
0:102  0:000  TSC: 2400 MHz
0:102  0:000  PIS: 400 MHz
0:102  0:000  PCI (00|00:00.00) : 8086 0154 class=060000
0:102  0:000  PCI (00|00:02.00) : 8086 0166 class=030000
0:102  0:000  Found GFX model=Intel HD Graphics 4000
0:102  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:102  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:102  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:102  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:102  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:102  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:102  0:000  PCI (00|00:1C.02) : 8086 1E14 class=060400
0:102  0:000  PCI (00|02:00.00) : 197B 2392 class=088000
0:102  0:000  PCI (00|02:00.02) : 197B 2391 class=080501
0:102  0:000  PCI (00|02:00.03) : 197B 2393 class=088000
0:102  0:000  PCI (00|02:00.04) : FFFF FFFF class=FFFFFF
0:102  0:000  PCI (00|00:1C.03) : 8086 1E16 class=060400
0:102  0:000  PCI (00|03:00.00) : 168C 002A class=028000
0:102  0:000  PCI (00|00:1C.05) : 8086 1E1A class=060400
0:102  0:000  PCI (00|04:00.00) : 10EC 8168 class=020000
0:102  0:000  LAN 0, Vendor=10EC, MMIO=2000
0:102  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:102  0:000  PCI (00|00:1F.00) : 8086 1E59 class=060100
0:102  0:000  PCI (00|00:1F.02) : 8086 1E03 class=010601
0:102  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:102  0:000  Clover load options size = 0 bytes
0:132  0:029  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:132  0:000  EFI\CLOVER\config.plist loaded: Success
0:132  0:000  Found theme directory: Yosemite
0:146  0:013  Found theme directory: Yosemite S
0:171  0:025  Found theme directory: embedded
0:188  0:016  Found theme directory: random
0:190  0:002  Found theme directory: thinkpad
0:210  0:020  Found theme directory: gold_clover
0:229  0:019  Found theme directory: bgm256
0:260  0:030  Loading early settings
0:260  0:000  timeout set to 5
0:260  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:260  0:000  KextsToPatch: 6 requested
0:260  0:000  KextToPatch 0: AirPortBrcm4360 (Broadcom 43224 whitelist) Kext bin patch, data len: 20
0:260  0:000  KextToPatch 1: IOAHCIBlockStorage (Enable Trim on SSD) Kext bin patch, data len: 9
0:260  0:000  KextToPatch 2: AirPortBrcm4360 (Broadcom 5Ghz XT) Kext bin patch, data len: 9
0:260  0:000  KextToPatch 3: AppleIntelFramebufferCapri (Patch audio HDMI HD4000 1366x768) Kext bin patch, data len: 12
0:260  0:000  KextToPatch 4: IOBluetoothFamily (Handoff Fix) Kext bin patch, data len: 8
0:260  0:000  KextToPatch 5: AppleHDA (IDT 76D9) Kext bin patch, data len: 4
0:260  0:000  Default theme: Yosemite
0:260  0:000  Copying global patch settings
0:260  0:000  LoadDrivers() start
0:260  0:000  Loading FSInject-64.efi  status=Success
0:265  0:004  Loading HFSPlus.efi  status=Success
0:271  0:005   - driver needs connecting
0:271  0:000  Loading HPFanReset.efi  status=Success
0:362  0:090  HPFanReset: successfully set fan control to BIOS mode.
0:362  0:000  Loading OsxAptioFixDrv-64.efi  status=Success
0:362  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:362  0:000  1 drivers needs connecting ...
0:362  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:362  0:000  HFS+ driver loaded 
0:362  0:000  Searching for invalid DiskIo BY_DRIVER connects:
0:362  0:000   - Handle B450D898 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362  0:000   - Handle B450D698 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362  0:000   - Handle B450D498 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362  0:000   - Handle B450D298 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:362  0:000   - Handle B450D098 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: B5A6ED18, Disconnect: Success
0:608  0:246  LoadDrivers() end
0:608  0:000  Dump SMC keys from NVRAM:
0:608  0:000  SetScreenResolution: 1024x768 - already set
0:608  0:000  Console modes reported: 4, available modes:
0:608  0:000    Mode 1: 80x25 (current mode)
0:608  0:000    Mode 3: 120x36
0:608  0:000    Mode 4: 128x40
0:608  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)
0:608  0:000  ScanSPD() start
0:609  0:000  ScanSPD() end
0:609  0:000  Get Acpi Tables List from RSDT:
0:609  0:000   Found table: FACP  17F6     len=268
0:609  0:000   Found table: HPET  17F6     len=56
0:609  0:000   Found table: APIC  17F6     len=188
0:609  0:000   Found table: MCFG  17F6     len=60
0:609  0:000   Found table: ASF!  17F6     len=165
0:609  0:000   Found table: SSDT  SataAhci len=714
0:609  0:000   Found table: SSDT  PtidDevc len=1162
0:609  0:000   Found table: SLIC  SLIC-MPC len=374
0:609  0:000   Found table: MSDM  SLIC-MPC len=85
0:609  0:000   Found table: FPDT  17F6     len=68
0:609  0:000   Found table: BGRT  17F6     len=56
0:609  0:000   Found table: SSDT  Cpu0Ist len=2288
0:609  0:000   Found table: SSDT  CpuPm len=2733
0:609  0:000  Calibrated TSC frequency =2394559175 =2394MHz
0:609  0:000  Loading main settings
0:609  0:000  Dropping 1 tables
0:609  0:000  Drop table 0 signature="DMAR" (52414D44)
0:609  0:000  set table: 52414D44,                0 to drop:
0:609  0:000  Config set ChassisType=0x8
0:609  0:000  found 7 volumes with blockIO
0:609  0:000   0. Volume:
0:609  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
0:638  0:028   1. Volume:
0:638  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)
0:639  0:001    Result of bootcode detection: bootable Linux (grub,linux)
0:643  0:004    This is SelfVolume !!
0:643  0:000   2. Volume:
0:643  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)
0:650  0:006   3. Volume:
0:650  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,68644A46-AFF4-4953-AFD1-7558A88995FA,0x1D1318E0,0x135F20)
0:665  0:014   4. Volume:
0:665  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,1859B364-49E6-4A67-BE0C-4C9F30E7E366,0x1D267800,0x40000)
0:666  0:001   5. Volume:
0:666  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,6470E836-EBC4-45E4-AF73-6596E4F7DF3A,0x1D2A7800,0x190AF800)
0:667  0:001    Result of bootcode detection: bootable Windows (vista,win)
0:667  0:000   6. Volume:
0:667  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(6,GPT,37BD7C20-741C-01D0-1036-CE190E3AE800,0x36357000,0x3FEEF57)
0:692  0:025  Using theme 'bgm256' (EFI\CLOVER\themes\bgm256)
0:692  0:000  theme bgm256 defined in NVRAM found and theme.plist parsed
0:692  0:000  OS main and drive as badge
0:709  0:016  font GoB_PTMono_10W_Bevel3.png loaded from themedir
0:709  0:000  Choosing theme bgm256
0:709  0:000  Custom entries start
0:709  0:000  Custom entry 0 FullTitle:"Mac HD" Path:"\System\Library\CoreServices\boot.efi" Type:1 Flags:0x6 matching Volume:"FAD293F3-7BDB-3CCE-BD54-F02774948C44"
0:709  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)) ... skipped
0:709  0:000      Checking volume "Mac HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)) ... skipped
0:709  0:000      Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,68644A46-AFF4-4953-AFD1-7558A88995FA,0x1D1318E0,0x135F20)) ... skipped
0:709  0:000  Custom entry 1 FullTitle:"Linux Mint" Path:"37BD7C20-741C-01D0-1036-CE190E3AE800" Type:4 Flags:0x0 matching Volume:"Linux HD"
0:709  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)) ... skipped
0:709  0:000      Checking volume "Mac HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)) ... skipped
0:709  0:000      Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,68644A46-AFF4-4953-AFD1-7558A88995FA,0x1D1318E0,0x135F20)) ... skipped
0:709  0:000  Custom entries finish
0:709  0:000  Scanning loaders...
0:709  0:000   0: 'Whole Disc Boot' no file system
0:709  0:000   1: 'EFI'
0:733  0:023      AddLoaderEntry for Volume Name=EFI
0:866  0:132   2: 'Mac HD'
0:896  0:029      AddLoaderEntry for Volume Name=Mac HD
0:941  0:045      Check if volume Is Hibernated:
0:941  0:000      Check sleep image 'by signature':
1:017  0:075      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:017  0:000      SleepImage name from pref: ImageVolume = 'Mac HD', ImageName = '\private\var\vm\sleepimage'
1:049  0:032      Reading first 512 bytes of sleepimage ...
1:065  0:015   OurBlockIoRead: Lba=1FCB630, Offset=3F96C6000 (BlockSize=512)
1:065  0:000   sig lion: F1E0BE9D
1:065  0:000   sig snow: 0
1:065  0:000   no valid sleep image offset was found
1:065  0:000      Reading completed -> Success
1:065  0:000       sleepimage offset could not be acquired
1:065  0:000       hibernated: no - sign
1:070  0:005    Icon 17 (icons\vol_internal_hfs.icns) not found
1:070  0:000    Theme path EFI\CLOVER\themes\bgm256, ThemeDir=B3E30920
1:318  0:247   3: 'Recovery HD'
1:334  0:015      AddLoaderEntry for Volume Name=Recovery HD
1:429  0:094   4: 'Legacy HD4' no file system
1:429  0:000   5: 'Legacy HD5' no file system
1:429  0:000   6: 'Legacy HD6' no file system
1:429  0:000  Custom legacy start
1:429  0:000  Custom legacy end
1:429  0:000  Scanning legacy ...
1:429  0:000   0: 'Whole Disc Boot' (legacy) not legacy
1:429  0:000   1: 'EFI' (grub,linux) add legacy
1:437  0:008   added 'Boot Linux from EFI' OSType=0 Icon=grub,linux
1:437  0:000   2: 'Mac HD' (legacy) not legacy
1:437  0:000   3: 'Recovery HD' (legacy) not legacy
1:437  0:000   4: 'Legacy HD4' (legacy) not legacy
1:437  0:000   5: 'Legacy HD5' (vista,win) add legacy
1:443  0:006   added 'Boot Windows from Legacy HD5' OSType=2 Icon=vista,win
1:443  0:000   6: 'Legacy HD6' (legacy) not legacy
1:443  0:000  Custom tool start
1:443  0:000  Custom tool end
1:467  0:023  found tool \EFI\CLOVER\tools\Shell64U.efi
1:467  0:000  Checking EFI partition Volume 1 for Clover
1:467  0:000   Found Clover
1:467  0:000  Use anime=Anim_9_Boot_Sequence frames=64
1:468  0:001  GetEfiBootDeviceFromNvram:
1:468  0:000   efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)
1:468  0:000   Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)'
1:468  0:000   LoaderPath: '<null string>'
1:468  0:000   Guid = 8146AA76-1048-491F-9100-B8DB51C1C59E
1:468  0:000   volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,8146AA76-1048-491F-9100-B8DB51C1C59E,0x64028,0x1D0CD8B8)
1:468  0:000   searching for that partition
1:468  0:000    found entry 1. 'Boot Mac OS X from Mac HD', Volume 'Mac HD'
1:468  0:000  Boot redirected to Entry 1. 'Boot Mac OS X from Mac HD'
1:468  0:000  DefaultIndex=1 and MainMenu.EntryCount=11
1:468  0:000  Use anime=Anim_1_Logo frames=49
1:826  0:357  GUI ready
7:998  6:172  StartLoader() start
7:998  0:000  Finally: Bus=99773kHz CPU=2394MHz
7:998  0:000  Kernel and Kext Patches at B9DEFA30:
7:998  0:000      Allowed: y
7:998  0:000      Debug: n
7:998  0:000      KernelCpu: n
7:998  0:000      Lapic: n
7:998  0:000      Haswell-E: n
7:998  0:000      AICPUPM: y
7:998  0:000      AppleRTC: y
7:998  0:000      KernelPm: y
7:998  0:000      FakeCPUID: 0x0
7:998  0:000      ATIController: null
7:998  0:000      ATIDataLength: 0
7:998  0:000      0 Kexts to load
7:998  0:000      6 Kexts to patch
7:998  0:000        KextPatch[0]: 20 bytes, AirPortBrcm4360
7:998  0:000        KextPatch[1]: 9 bytes, IOAHCIBlockStorage
7:998  0:000        KextPatch[2]: 9 bytes, AirPortBrcm4360
7:998  0:000        KextPatch[3]: 12 bytes, AppleIntelFramebufferCapri
7:998  0:000        KextPatch[4]: 8 bytes, IOBluetoothFamily
7:998  0:000        KextPatch[5]: 4 bytes, AppleHDA
7:998  0:000  Loading boot.efi  status=Success
8:176  0:177  GetOSVersion: : 10.10.3
8:176  0:000  insert table 9 for dev 0:0
8:176  0:000  insert table 9 for dev 0:0
8:176  0:000  Trusting SMBIOS...
8:176  0:000  Channels: 1
8:176  0:000  Interleave: 0 1 2 3 4 5 6 7
8:176  0:000  SMBIOS Type 17 Index = 0 => 0 0:
8:176  0:000  BANK0 DIMM0 EMPTY
8:176  0:000   partNum=AM1L16BC4R1-B1GS  
8:176  0:000  SMBIOS Type 17 Index = 1 => 1 1:
8:176  0:000  BANK0 DIMM1 1600MHz 4096MB
8:176  0:000  mTotalSystemMemory = 4096
8:176  0:000  NumberOfMemoryDevices = 2
8:176  0:000  Type20[0]->End = 0x3FFFFF, Type17[1] = 0x1000
8:176  0:000  Table 131 is present, CPUType=10
8:176  0:000  Change to: 903
8:176  0:000  RSDT 0xB9FFE0AC
8:176  0:000  FADT from RSDT: 0xB9FFC000
8:176  0:000  XSDT 0xB9FFE120
8:176  0:000  FADT from XSDT: 0xB9FFC000
8:176  0:000  Xsdt reallocation done
8:176  0:000  old FADT length=10C
8:176  0:000  Found OperationRegion(GNVS, SystemMemory, B9F79918, ...)
8:176  0:000  Found OperationRegion(ASMA, SystemMemory, B9F7B018, ...)
8:176  0:000  Found OperationRegion(AF10, SystemMemory, B9F7D018, ...)
8:176  0:000  Found OperationRegion(HPDF, SystemMemory, B9F7EE18, ...)
8:176  0:000  Found OperationRegion(HPD2, SystemMemory, B99F1F18, ...)
8:176  0:000  Found OperationRegion(HPBR, SystemMemory, B9F7AF18, ...)
8:176  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
8:176  0:000  Found OperationRegion(IGDM, SystemMemory, 0, ...)
8:176  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
8:176  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
8:176  0:000  Found OperationRegion(THMR, SystemMemory, 0, ...)
8:176  0:000  Found OperationRegion(NPC2, SystemMemory, 0, ...)
8:198  0:021  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
8:213  0:014  Apply DsdtFixMask=0x00000000 old way
8:213  0:000     drop _DSM mask=0x0000
8:213  0:000  ========= Auto patch DSDT Starting ========
8:213  0:000  VideoCard devID=0x1668086
8:213  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
8:213  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
8:213  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
8:223  0:010  Found Airport Atheros at 0x1C0003, 0x0, DeviceID=0x002A
8:224  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
8:224  0:000  first CPU found at 12EB offset 12EE
8:224  0:000  score candidate at 12E7
8:224  0:000  score inserted in acpi_cpu_score _PR_
8:224  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7 
  within the score: _PR_
8:224  0:000  ========= Auto patch DSDT Finished ========
8:224  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
8:224  0:000   Xsdt has tables count=13 
8:224  0:000   Table: SSDT  SataAhci  714 dropped
8:224  0:000   Table: SSDT  PtidDevc  1162 dropped
8:224  0:000   Table: SSDT  Cpu0Ist  2288 dropped
8:224  0:000   Table: SSDT  CpuPm  2733 dropped
8:224  0:000  corrected XSDT length=108
8:224  0:000  Inserting ssdt.aml from EFI\CLOVER\ACPI\patched ... Success
8:242  0:017   CPUBase=0 and ApicCPUBase=0 ApicCPUNum=8
8:242  0:000  EdidDiscovered size=128
8:242  0:000  00 | 00 FF FF FF FF FF FF 00 06 AF EC 21 00 00 00 00 
8:242  0:000  16 | 00 15 01 04 90 22 13 78 02 C8 95 9E 57 54 92 26 
8:242  0:000  32 | 0F 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 
8:242  0:000  48 | 01 01 01 01 01 01 CE 1D 56 D2 50 00 26 30 10 10 
8:242  0:000  64 | 3E 00 58 C1 10 00 00 18 DF 13 56 D2 50 00 26 30 
8:242  0:000  80 | 10 10 3E 00 58 C1 10 00 00 18 00 00 00 00 00 00 
8:242  0:000  96 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 
8:242  0:000  112 | 00 0D 39 E0 0D 3C 64 14 12 24 6F 20 20 20 00 25 
8:242  0:000  Intel GFX injection not set
8:242  0:000  HDA Controller [8086:1E20] :: PciRoot(0x0)\Pci(0x1B,0x0) => codec not detected
8:253  0:010  LAN Controller [10EC:8168] :: PciRoot(0x0)\Pci(0x1C,0x5)\Pci(0x0,0x0)
8:253  0:000  stringlength = 488
8:253  0:000  CurrentMode: Width=1024 Height=768
8:253  0:000  FSInjection: using kexts path: 'EFI\CLOVER\kexts\10.10'FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: B450D898
8:255  0:002  
8:262  0:007  MSR 0x1B0   set to        00000000
8:262  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
8:262  0:000    Extra kext: EFI\CLOVER\kexts\10.10\ACPIBacklight.kext
8:276  0:013    Extra kext: EFI\CLOVER\kexts\10.10\ACPIBatteryManager.kext
8:277  0:001    Extra kext: EFI\CLOVER\kexts\10.10\ACPIPoller.kext
8:283  0:006    Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext
8:297  0:013      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\ACPISensors.kext
8:298  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\CPUSensors.kext
8:298  0:000      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\GPUSensors.kext
8:300  0:002      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext\Contents\PlugIns\LPCSensors.kext
8:308  0:007    Extra kext: EFI\CLOVER\kexts\10.10\ProBookARPT.kext
8:310  0:001    Extra kext: EFI\CLOVER\kexts\10.10\RealtekRTL8111.kext
8:314  0:004    Extra kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext
8:315  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
8:319  0:003      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
8:321  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.10\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
8:324  0:003  Custom boot is disabled
8:349  0:024  Closing log

Here if my current config.plist on the EFI partition:

Code: 
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>ACPI</key>
    <dict>
        <key>DSDT</key>
        <dict>
            <key>Debug</key>
            <false/>
            <key>DropOEM_DSM</key>
            <false/>
            <key>ReuseFFFF</key>
            <false/>
        </dict>
        <key>DropTables</key>
        <array>
            <dict>
                <key>Signature</key>
                <string>DMAR</string>
            </dict>
        </array>
        <key>SSDT</key>
        <dict>
            <key>DropOem</key>
            <true/>
            <key>Generate</key>
            <false/>
        </dict>
    </dict>
    <key>Boot</key>
    <dict>
        <key>Arguments</key>
        <string>dart=0 kext-dev-mode=1</string>
        <key>Debug</key>
        <false/>
        <key>Legacy</key>
        <string>LegacyBiosDefault</string>
        <key>Secure</key>
        <false/>
        <key>Timeout</key>
        <integer>5</integer>
        <key>XMPDetection</key>
        <string>Yes</string>
    </dict>
    <key>Devices</key>
    <dict>
        <key>USB</key>
        <dict>
            <key>FixOwnership</key>
            <false/>
            <key>Inject</key>
            <false/>
        </dict>
    </dict>
    <key>GUI</key>
    <dict>
        <key>Custom</key>
        <dict>
            <key>Entries</key>
            <array>
                <dict>
                    <key>Disabled</key>
                    <false/>
                    <key>FullTitle</key>
                    <string>Mac HD</string>
                    <key>Ignore</key>
                    <false/>
                    <key>NoCaches</key>
                    <false/>
                    <key>Type</key>
                    <string>OSX</string>
                    <key>Volume</key>
                    <string>FAD293F3-7BDB-3CCE-BD54-F02774948C44</string>
                    <key>VolumeType</key>
                    <string>Internal</string>
                </dict>
                <dict>
                    <key>Disabled</key>
                    <false/>
                    <key>FullTitle</key>
                    <string>Linux Mint</string>
                    <key>Ignore</key>
                    <false/>
                    <key>Path</key>
                    <string>37BD7C20-741C-01D0-1036-CE190E3AE800</string>
                    <key>Type</key>
                    <string>Linux</string>
                    <key>Volume</key>
                    <string>Linux HD</string>
                    <key>VolumeType</key>
                    <string>Internal</string>
                </dict>
            </array>
        </dict>
        <key>Mouse</key>
        <dict>
            <key>DoubleClick</key>
            <integer>500</integer>
            <key>Enabled</key>
            <false/>
            <key>Mirror</key>
            <false/>
            <key>Speed</key>
            <integer>8</integer>
        </dict>
        <key>Scan</key>
        <true/>
        <key>ScreenResolution</key>
        <string>1024x768</string>
        <key>Theme</key>
        <string>Yosemite</string>
    </dict>
    <key>Graphics</key>
    <dict>
        <key>DualLink</key>
        <integer>0</integer>
        <key>Inject</key>
        <dict>
            <key>ATI</key>
            <false/>
            <key>Intel</key>
            <false/>
            <key>NVidia</key>
            <false/>
        </dict>
        <key>ig-platform-id</key>
        <string>0x01660003</string>
    </dict>
    <key>KernelAndKextPatches</key>
    <dict>
        <key>AppleRTC</key>
        <true/>
        <key>AsusAICPUPM</key>
        <true/>
        <key>KextsToPatch</key>
        <array>
            <dict>
                <key>Comment</key>
                <string>Broadcom 43224 whitelist</string>
                <key>Find</key>
                <data>
                TWFjLTJFNkZBQjk2NTY2RkU1OEM=
                </data>
                <key>Name</key>
                <string>AirPortBrcm4360</string>
                <key>Replace</key>
                <data>
                TWFjLTZGMDE1NjFFMTZDNzVEMDY=
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>Enable Trim on SSD</string>
                <key>Find</key>
                <data>
                QVBQTEUgU1NE
                </data>
                <key>Name</key>
                <string>IOAHCIBlockStorage</string>
                <key>Replace</key>
                <data>
                AAAAAAAAAAAA
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>Broadcom 5Ghz XT</string>
                <key>Find</key>
                <data>
                WFQAXRlUIQAA
                </data>
                <key>Name</key>
                <string>AirPortBrcm4360</string>
                <key>Replace</key>
                <data>
                WFQAjahetgAJ
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>Patch audio HDMI HD4000 1366x768</string>
                <key>Find</key>
                <data>
                BAYAAAAEAACBAAAA
                </data>
                <key>Name</key>
                <string>AppleIntelFramebufferCapri</string>
                <key>Replace</key>
                <data>
                BAYAAAAIAAAGAAAA
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>Handoff Fix</string>
                <key>Find</key>
                <data>
                SIXAdFwPt0g=
                </data>
                <key>Name</key>
                <string>IOBluetoothFamily</string>
                <key>Replace</key>
                <data>
                Qb4PAAAA61k=
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>IDT 76D9</string>
                <key>Find</key>
                <data>
                hBnUEQ==
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                2XYdEQ==
                </data>
            </dict>
        </array>
    </dict>
    <key>SMBIOS</key>
    <dict>
        <key>BiosReleaseDate</key>
        <string>08/08/12</string>
        <key>BiosVendor</key>
        <string>Apple Inc.</string>
        <key>BiosVersion</key>
        <string>MBP91.88Z.00D3.B08.1208081132</string>
        <key>Board-ID</key>
        <string>Mac-6F01561E16C75D06</string>
        <key>BoardManufacturer</key>
        <string>Apple Inc.</string>
        <key>BoardSerialNumber</key>
        <string>WF6NEWM5VD4MCUL4T</string>
        <key>BoardType</key>
        <integer>10</integer>
        <key>ChassisAssetTag</key>
        <string>MacBook-Aluminum</string>
        <key>ChassisManufacturer</key>
        <string>Apple Inc.</string>
        <key>ChassisType</key>
        <string>8</string>
        <key>Family</key>
        <string>MacBook Pro</string>
        <key>Manufacturer</key>
        <string>Apple Inc.</string>
        <key>Mobile</key>
        <true/>
        <key>ProductName</key>
        <string>MacBookPro9,2</string>
        <key>SerialNumber</key>
        <string>C02LMCUKDTY3</string>
        <key>Trust</key>
        <false/>
        <key>Version</key>
        <string>1.0</string>
    </dict>
    <key>SystemParameters</key>
    <dict>
        <key>InjectKexts</key>
        <string>Detect</string>
    </dict>
</dict>
</plist>

Here is a screenshot of my partitions:
Screen Shot 2015-04-12 at 9.11.50 PM.png

500GB hard drive
-200MB EFI
-250GB Mac OSX 10.10.3
-650MB Mac Recovery (I want to hide this in Clover)
-134MB Windows reserve partition
-215GB Windows 7
-34GB Mint Linux

I guess I'm too much of a noob to use Clover configurator to add the UUID to the three operating systems as bootable selections. All I want when I turn on my computer is for clover to pop up and say Mac, Windows, and Linux. And load Mac by default after 5 seconds, which it already does. I wish Clover had a **TRIPLE BOOT SECTION** where I could just link to partitions and UUID's and hit save. There is so much going on in that program, it's overwhelming. I'm lost, and I know I'm ALMOST at the finish line. Thank you 1000x in advance.
 
Last edited:
Did you install Linux in UEFI mode?
 
Pretty sure I did. I told it to install the bootloader in the efi partition without formatting it. Setup completed just fine. How can I double check my install? I can reinstall from the USB I made if I need to.
 
HORIZUN said:
Pretty sure I did. I told it to install the bootloader in the efi partition without formatting it. Setup completed just fine. How can I double check my install? I can reinstall from the USB I made if I need to.
Click to expand...

Check your EFI partition for the Linux bootloader files. For example, Ubuntu installs to \EFI\Ubuntu.

Note: You cannot boot the Linux system partition directly if you installed UEFI. You must point the custom entry to the EFI partition (EFI GUID) and set the path to the path of the Linux bootloader (assume GRUBX64.efi).
 
This is where I suck. Here is a screenshot of my EFI partition:

Screen Shot 2015-04-12 at 10.05.44 PM.png

How do I link the linux files to Clover?

I know I can do it in Clover configurator, I just don't know how to do it all. I added some custom entries, but I didn't know what information needed to go where.
 
You have to know how a UEFI system works.
A UEFI Linux Mint does not boot directly from its partition (I see you use UUID of your Linux Mint partition, which is wrong).
To boot Linux Mint, you have to run /EFI/linuxmint/grubx64.efi in EFI partition, so you have to:
- Check if that file exists. If it does not exist, it means you didn't install linux in UEFI mode.
- Create a custom entry to EFI partition, path \EFI\linuxmint\grubx64.efi, Type Linux.
- Done.

EDIT: If the path is differrent, you have to change it.
 
I made custom entries for Mac, Windows, and Linux.

Added volume names as UUID for Mac and Windows, and linked to efi\linux\grubx64.efi and exported it to my efi partition and rebooted but not it only shows boot Microsoft Windows from uefi, boot Mac osx from Mac hd, and boot Mac recovery. Why is this program so complicated to use?? Am I over complicating this? There is no how to video for Clover showing how to add UUID and make custom boot selection.

Here is linux custom entry. Is this correct?

Screen Shot 2015-04-12 at 10.38.54 PM.png

Mac entry.
Screen Shot 2015-04-12 at 10.40.40 PM.png

Windows entry.
Screen Shot 2015-04-12 at 10.42.56 PM.png

I know I am so close to having a triple boot, just this program hates me. I'm not so good with Clover configurator. I will edit plist manually if someone can show me what must be edited.
 
HORIZUN said:
I made custom entries for Mac, Windows, and Linux.

Added volume names as UUID for Mac and Windows, and linked to efi\linux\grubx64.efi and exported it to my efi partition and rebooted but not it only shows boot Microsoft Windows from uefi, boot Mac osx from Mac hd, and boot Mac recovery. Why is this program so complicated to use?? Am I over complicating this? There is no how to video for Clover showing how to add UUID and make custom boot selection.
Click to expand...

Stop complaining, the program is easy to use, but you have to clear your mind before doing stuff like this. If you only want easy to use things, reformat your HDD and install Windows and Linux, they will show up as easy as you want.

Your path is not "efi\linux\grubx64.efi". Look at your drive again, it's "\LINUX\grubx64.efi".
 
HORIZUN said:
I made custom entries for Mac, Windows, and Linux.

Added volume names as UUID for Mac and Windows, and linked to efi\linux\grubx64.efi and exported it to my efi partition and rebooted but not it only shows boot Microsoft Windows from uefi, boot Mac osx from Mac hd, and boot Mac recovery. Why is this program so complicated to use?? Am I over complicating this? There is no how to video for Clover showing how to add UUID and make custom boot selection.

Here is linux custom entry. Is this correct?

View attachment 133835

Mac entry.
View attachment 133836

Windows entry.
View attachment 133837

I know I am so close to having a triple boot, just this program hates me. I'm not so good with Clover configurator. I will edit plist manually if someone can show me what must be edited.
Click to expand...

You're good with Clover Configurator, but you're bad at reading!

As I said in the guide and comments above, both Linux and Windows bootloaders are in EFI partition!

See in your boot.log:
Code: 
000   0. Volume:
0:609  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
0:638  0:028   1. Volume:
0:638  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1A5D300A-0192-4281-A98D-1372C837EB52,0x28,0x64000)
0:639  0:001    Result of bootcode detection: bootable Linux (grub,linux)
0:643  0:004    This is SelfVolume !!
0:643  0:000   2. Volume:

Your EFI partition UUID is 1A5D300A-0192-4281-A98D-1372C837EB52.

Also you have to make sure the path is correct!
 
So, this is months later, and I still don't have a working triple boot. I deleted the linux partition and reinstalled. It said something about bootloader error while installing and I had it install the bootloader files to sd6, the ext4 partition I created. I deleted my custom entries in config.plist and let clover auto scan and now I have linux mint, windows 7, and OSX as selectable boot options in clover at startup. In the EFI partition, I have linuxmint\grubx64.efi and when I try to boot linux from clover, I have a blinking text icon but cant type at all. It just sits at that screen. If I try to boot grub from efi mode my laptop crashes with a boot error. OSX and windows both boot just fine. I'm tearing my hair out trying to fix this, I just want this thing to boot... I know I am so close it's so frustrating. What do I need to do to fix this issue?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top