jaymonkey
Moderator
- Joined
- Aug 27, 2011
- Messages
- 4,080
- Motherboard
- GB Z490 Vision D
- CPU
- i9-10850K OC @ 5.2 GHz
- Graphics
- RX6800-XT+UHD630
- Mac
- Mobile Phone
Hi Guys,
Smooth update on my two main hackingtosh systems using the 10.4.4 combo update downloaded from Apple support site using the link in post #1. Ran a standard update on my desktop but used the clone method on my laptop to preserve jHPS+ formatted system partition.
Rebooted 3 times on both systems during the update, the process appeared to stall for around 10 mins on both systems after the 1st and 2nd reboot but i just left it and it continued fine .. this may have been because i did not update Clover prior to running the update (was running Clover revision 4844)
Have since updated Clover to revision 4910 and installed/updated the latest versions of Lilu, WhatEverGreen and AppleALC in /L/E and everything is working perfect.
Cheers
Jay
Smooth update on my two main hackingtosh systems using the 10.4.4 combo update downloaded from Apple support site using the link in post #1. Ran a standard update on my desktop but used the clone method on my laptop to preserve jHPS+ formatted system partition.
Rebooted 3 times on both systems during the update, the process appeared to stall for around 10 mins on both systems after the 1st and 2nd reboot but i just left it and it continued fine .. this may have been because i did not update Clover prior to running the update (was running Clover revision 4844)
Have since updated Clover to revision 4910 and installed/updated the latest versions of Lilu, WhatEverGreen and AppleALC in /L/E and everything is working perfect.
Cheers
Jay
Last edited: