- Joined
- Sep 25, 2011
- Messages
- 42
- Motherboard
- HP PROBOOK 4330s
- CPU
- i3 2310M
- Graphics
- HD3000
- Mac
- Classic Mac
- Mobile Phone
Re: Install Guide/Discussion Thread for HP Probook 4530s V2!
Nikstar, thanks for that! It solved my problem. So I now confirm the 4330s working fine with the DSDT file made by bkkribs's guide's auto patcher. Only you need to press Fn+F3 at logon screen for Light To Be.
Nikstar, thanks for that! It solved my problem. So I now confirm the 4330s working fine with the DSDT file made by bkkribs's guide's auto patcher. Only you need to press Fn+F3 at logon screen for Light To Be.
nikstar said:mistseeker said:Okay, I can officially confirm that the 4530s DSDT file created with Autopatcher doesn't work on my 4330s. I tried it twice. The result was a black screen without kernel panic during booting, just before the login screen. Had to boot in safe mode and remove the .aml from /Extra.
If you can somehow direct me to a good guide to create my own .aml file, I will try to create it myself, test it and upload it here.
Did you boot with battery power when you installed that DSDT file?
Because for all of us that we are using DSDT's we have a small issue when we are booting our 4530's with battery power, will result a black screen. Actually is the brightness that is turned off, all the way down.
By increasing the brightness (Fn + F3) the "light" cames up