- Joined
- Apr 27, 2018
- Messages
- 33
- Motherboard
- LENOVO C20 THINKSTATION
- CPU
- 2X Intel Xeon E5620
- Graphics
- NVIDIA GEFORCE 605 1 GB DDR3
Yeah sure, 5 minutes and I’ll tell you what happensTry this config.plist with the EFI I gave you
Yeah sure, 5 minutes and I’ll tell you what happensTry this config.plist with the EFI I gave you
I accidentally booted without verbose mode the Apple logo showed up and got stuck like this, than rebooted with verbose and the same things as before appearedTry this config.plist with the EFI I gave you
Just to be sure i’m Not a complete idiot and we’re not doing all this for a stupid mistake I made, i’m gonna upload all my bios settings could you check them out?Yeah you gonna have to keep trying different CPU fake-ids, seems like those are very picky.
Sorry but is there somewhere where I can see and at least copy thoose fake ids(i hope you’re talking about CPUIDs)Looks like CPU kernel panic, try fake IDs and cpus=1, or cpus=2 with halt enabler=true.
Clover Configurator :Sorry but is there somewhere where I can see and at least copy thoose fake ids(i hope you’re talking about CPUIDs)
Kernel panic caused by AppleIntelCPUPowerManagement.kextI accidentally booted without verbose mode the Apple logo showed up and got stuck like this, than rebooted with verbose and the same things as before appeared
I would never recommend NullCPUPowerManagement, it will make your CPUs run at full speed at all times. If you can't get the CPUs to work correctly then use fakecpu-id until you can get it close as possible to stable.Kernel panic caused by AppleIntelCPUPowerManagement.kext
Try NullCPUPowerManagement
I have tried every single fake cpuid, every time I get kernel panic, still still haven’t tried yet https://www.tonymacx86.com/resources/nullcpupowermanagement.268/I would never recommend NullCPUPowerManagement, it will make your CPUs run at full speed at all times. If you can't get the CPUs to work correctly then use fakecpu-id until you can get it close as possible to stable.