- Joined
- Jun 27, 2020
- Messages
- 3
- Motherboard
- ASRock Z490 Phantom Gaming 4
- CPU
- i5 10400F
- Graphics
- RX 5700 XT
Hello, I apologize for my weak English. assembled a new PC, I want to install catalina through opencore 0.5.9, but problems started at the very beginning of the installation (maybe in bios didn’t set the settings correctly or config.plist didn’t configure correctly). Maybe someone will look and tell me, what did wrong?
PC:
Motherboard ASRock Z490 Phantom Gaming 4 (updated bios to the latest version);
RAM Crucial Ballistix 2x8GB 3200 BL2K8G32C16U4R;
CPU i5 10400F;
SSD M2 WD Blue SN550 NVMe 1TB;
Video Card PowerColor RX 5700 XT 8GB 8GBD6-3DH (device id 731F1002).
On this site I tried to configure config.plist: OpenCore-Desktop-Guide
1) Configured config.plist 2) Created a boot flash, mounted the efi disk and copied my efi folder to it. 3) Updated bios. I looked on the Internet, what settings you need to choose in bios - chose. 4) When you turn on the computer, press F11, a menu with a choice of disks appears, select efi, a menu appears: a) install macos, b) shell, c) reset nvram. I choose to install macos and after a couple of seconds on the screen what is in the photo.
PC:
Motherboard ASRock Z490 Phantom Gaming 4 (updated bios to the latest version);
RAM Crucial Ballistix 2x8GB 3200 BL2K8G32C16U4R;
CPU i5 10400F;
SSD M2 WD Blue SN550 NVMe 1TB;
Video Card PowerColor RX 5700 XT 8GB 8GBD6-3DH (device id 731F1002).
On this site I tried to configure config.plist: OpenCore-Desktop-Guide
1) Configured config.plist 2) Created a boot flash, mounted the efi disk and copied my efi folder to it. 3) Updated bios. I looked on the Internet, what settings you need to choose in bios - chose. 4) When you turn on the computer, press F11, a menu with a choice of disks appears, select efi, a menu appears: a) install macos, b) shell, c) reset nvram. I choose to install macos and after a couple of seconds on the screen what is in the photo.