@Jos1984 here are the files for you to test:
add these SSDTs into EFI/Clover/ACPI/Patched (remove everything else before copying them).
remove the old config.plist and use this one that i attached.
About kexts and procedures read the post #1 (my guide) carefully and you have everything explained.
The only difference is you use this config.plist that i attached and the SSDTs that i attached, everything else is same as on guide.
Then i need you to capture Active USB Ports on IOregistryExplorer,
After you installed the files and rebooted:
Open IOregistryexplorer and:
- Grab a USB2.0 Device (Mouse/USB2.0 Flash Drive or whatever u want) and plug it on each usb port:
(plug it on first port, hold it 3 sec, then unplug and plug it on other usb port, until you done this on all ports on the laptop.)
after you are done with that grab a USB3.0 device (USB3.0 Flash Drive/External Drive or whatever 3.0 device).
do the same procedure like with usb2 device but with the 3.0 device this time.
After you are done with the procedures, Save a copy of ioreg and attach it so i can build USB Ports Injector.
Test what is working and what isn't working.
Report back with results.