[Guide] HP Elite 8300 & 6300 Pro (all form factors) using Clover UEFI hotpatch

Maxlpulpo · May 14, 2020

Hi guys,

Someone has a SSDT.aml working with Hp6300 i7 3770 ? My CPU just turn at 3,4Ghz but I know that it can run at 3,9Ghz. How can solve this ?

It try various versions of ssdtPRGen.sh and the @LisaAlterEgo 's method ( https://www.tonymacx86.com/threads/...sing-clover-uefi-hotpatch.279627/post-2058672 ) Nothing works...

Thanks.

HP 6300 i7 3770, Catalina 10.15.4

Rickybaker · May 15, 2020

Thanks, I found it.

I managed to install it and yesterday everything seemed to be working fine. This morning I turned it on, but it doesn't boot. On the screen with the apple the bar is stuck at two thirds.

Asural · May 15, 2020

Rickybaker said:
On the screen with the apple the bar is stuck at two thirds.

After deleting "Device-> Properties-> PciRoot (0) / Pci (0x02,0)" in config.plist

If you want to display it on the HD2500, follow the instructions below.

Clover HD2500

Booting fine into sierra. with -x but when normal booting i get a glitched display not artifacts like completely glitched and garbled Apprently clover supports hd2500 how ever. it doesnt seem to be connecting in? any solutions? Desktop Pentium HD2500

www.tonymacx86.com

If you are using a graphics board, follow the instructions below.

[HELP] Enable VDA Decoding on HD p4000 with AMD RX 570

Hi all, i'm trying to enable VDA deconding on my ivy bridge build. i've an Xeon e3-1245v2 with hdp4000 enabled on bios but with any monitor connected, and an AMD RX570 4GB with 3 monitor. AMD is working well, but i want to enable hdp4000 as 0fbmem decode. someone have some ideas? in...

www.tonymacx86.com

Refer to the following for the BIOS settings when using a graphics board.

Radeon RX 4XX/5XX standalone system, AMDRadeonX4250.kext (GVA support H264) does not support HEVC HW

I have an RX 580 8gb. Could someone walk me through where to find the AMDRadeonX4250.kext and how to install it?

www.tonymacx86.com

Asural · May 15, 2020

Maxlpulpo said:
Someone has a SSDT.aml working with Hp6300 i7 3770 ? My CPU just turn at 3,4Ghz but I know that it can run at 3,9Ghz. How can solve this ?

I have the same phenomenon with i5-3570.
Try creating it by explicitly specifying the CPU as shown below.

Code:

~/PRGen170/ssdtPRGen.sh -a CPU0 -p i7-3770

Maxlpulpo · May 15, 2020

Asural said:
I have the same phenomenon with i5-3570.
Try creating it by explicitly specifying the CPU as shown below.

Thanks for your message, but it doesn't work. It doesn't boot, I stuck on Apple logo bar charging but nothing...
Without the SSDT.aml, it works fine...

Any other idea ?

OS : Catalina 10.15.4
HP 6300 i7 3770 + GT 730

Rickybaker · May 15, 2020

Rickybaker said:
I managed to install it and yesterday everything seemed to be working fine. This morning I turned it on, but it doesn't boot. On the screen with the apple the bar is stuck at two thirds.

It was actually my fault, I forgot to copy some files after the installation. Now it boots correctly.

The only passage I didn't figure out is the power management section. I couldn't find the SSDT.aml file.
My CPU is an i5-3475s, should I use the beta branch instead?

One more question: if I format the disk using APFS encrypted and reinstall mac os, would it create any problem?

Asural · May 15, 2020

Maxlpulpo said:
Any other idea ?

Ask questions in the thread below.

Quick Guide to Generate a SSDT for CPU Power Management

Piker Alpha's ssdtPRGen script will generate a SSDT you can use to achieve the maximum amount of power states for your desktop CPU. Please note that desktop power management is not mandatory. Requirements: Working internet connection How to Generate a SSDT for Power Management 1. Configure...

www.tonymacx86.com

Maxlpulpo · May 16, 2020

Thanks @Asural

Solution for SSDT.aml for HP 8300 / HP 6300 I7 3770 :

I solved the problem by changing my SMBIOS from Macmini6,1 to IMac13,2 and generated a new SSDT.aml file with ssdtPRGen v.17 with the @LisaAlterEgo Method.

Don't forget to modify your USBPorts.kext file as explain in the USB Ports part (see Guide, first post)

Thanks a lot for this Guide and thanks to the community.
Best regards.

HP 6300 i7 3700 + GT 730 / MacOs 10.15.4 Catalina

Asural · May 17, 2020

Maxlpulpo said:
Don't forget to modify your USBPorts.kext file as explain in the USB Ports part (see Guide, first post)

It works without "USBPorts.kext", but please refer to the following questions.