[Guide] HP Elite 8300 & 6300 Pro (all form factors) using Clover UEFI hotpatch

[ORdiCo]

If you have Nvidia Web drivers installed, remove those first.

Thx for the heads up. I’ve not installed any webdrivers for this new setup as i couldn’t find any drivers for mojave.

 

[ORdiCo]

If you have Nvidia Web drivers installed, remove those first.

So some update after such a long time...
SO I gotten my hands on a OEM Rx 560 4B but a PSU upgrade was required as the RX560 requires external power.
So long story short, I gotten a new ATX PSU and the cable adapter from MODDIY.com and now I am able to boot into mojave but only if I boot via the installation USB.
I am not able to boot in without the installation USB. I am not sure what went wrong.
attached is the verbose output during startup.

Image1: verbose output when I first started up with the new PSU.

Image2: Verbose output when re-booting(without USB) after successful bootup using installation USB.

I can't really tell what's wrong...
PLease advise.

 

[trs96]

PLease advise.

Look for the differences in the two EFI folders. That will help you fix the booting problem.

 

[namrokb]

Look for the differences in the two EFI folders. That will help you fix the booting problem.

Can’t he just copy usb stick efi and paste on hard drive?

 

[trs96]

Can’t he just copy usb stick efi and paste on hard drive?

Better to actually learn about what the problem is. Copy/Paste is what most people already know.

 

[ORdiCo]

Look for the differences in the two EFI folders. That will help you fix the booting problem.

ok... so... lemme guess, I mount both the efi partitions using the terminal and make sure the files are the same in the following folders?
EFI/Clover/kexts/Other
EFI/Clover/Drivers/UEFI
EFI/Clover/ACPI/Patched