[Guide] Booting the OS X installer on LAPTOPS with Clover

[RehabMan]

I've found the specified location in the plist. Is changing the 1 to 0 like below sufficient to disable the patch?

<key>framebuffer-patch-enable</key>
<integer>0</integer>

If not, what is the proper way to do so?

The 32mb related DVMT setting is clearly commented in the plist (stolenmem/fbmem properties).

My dedicated memory shows as 128MB in Windows:
View attachment 386750

You missed some reading:

IMPORTANT!: Contrary to many of the guides you will read, Windows is NOT a valid way to determine what DVMT-prealloc is set to. There is no correlation, especially with Windows 10.

 

[Euro321]

Hi,

I am trying to reach the installer but I can't because of some USB erros. It's HP EliteBook Revolve 810 G1.

I can attach DSDT via Clover if it's needed.

I tried USBInjectAll, FakePCID with USBXHCI but nothing

 

[RehabMan]

Hi,

I am trying to reach the installer but I can't because of some USB erros. It's HP EliteBook Revolve 810 G1.

I can attach DSDT via Clover if it's needed.

I tried USBInjectAll, FakePCID with USBXHCI but nothing

EFI/Clover is not at all as per post #1.
And your profile does not indicate hardware details for the laptop you're asking for help.
Please read post #1 again.

 

[Euro321]

EFI/Clover is not at all as per post #1.
And your profile does not indicate hardware details for the laptop you're asking for help.
Please read post #1 again.

Now, I fixed my profile, I added some EFI drivers in the folder, I copied the config_HD4000_1366x768.plist and renamed to config.plist but I am stuck at the same error. The same EFI folder boots on my ProBook 4540s.

 

[flex21]

Hi,

Mojave 10.14.3
HP ProOne 440 g4 All-in-One

CPU: Core i3 8100T
Chipset: Q370,
SDS: NVME Kingston 240Gb
8Gb DDR4

Display: 1920x1080 connected like LVDS


I try config_UHD630 but give a black screen.

Could only install with options:

• ig-platform-id: 0x3E9B0007
• AAPL,ig-platform-id: 07009B3E
• inject intel

But haven't acceleration

Thx for help

 

[RehabMan]

Now, I fixed my profile,

Still not fixed. Screen resolution is missing. Please read the FAQ carefully.

 

[RehabMan]

Hi,

Mojave 10.14.3
HP ProOne 440 g4 All-in-One

CPU: Core i3 8100T
Chipset: Q370,
SDS: NVME Kingston 240Gb
8Gb DDR4

Display: 1920x1080 connected like LVDS


I try config_UHD630 but give a black screen.

Could only install with options:

• ig-platform-id: 0x3E9B0007
• AAPL,ig-platform-id: 07009B3E
• inject intel

But haven't acceleration

Thx for help

Please fix your profile as requested in post #1/FAQ.

Also, open a separate thread with complete problem reporting files (again, as per FAQ).

 

[Euro321]

Still not fixed. Screen resolution is missing. Please read the FAQ carefully.

You can find all the files needed and the picture in the zip below. I also fixed the profile.

a) When I try to boot with with CSM enabled I get an error allocating pages at 0x260 or something like that. If you need a picture just tell me and I will upload it here. So I need to calculate the slide. The problem is that HP doesn't implement all the functions of the UEFI so I can't launch any shell. (Clover's shell doesn't launch, it's stuck on the underscore sign)

b) If I boot without CSM, it boots fine but I get artifacts all over the place I can't see what's going on so native UEFI is the solution I tink

c) If I boot with Osxaptio (old driver) it works fine but I get EFIRuntime timeout because of the inexistent NVRAM support.

d) If I boot with Osxaption + EmuVariableEFI, Clover won't load at alll (I can't see the boot menu screen and it's stuck on black screen)

 

[Blackbeard1st]

Hey Guys ,

HP Elitebook 8560p (i7 2620m) no gpu

I'm not able to boot the installer at all, stuck at 50% loading then Logo goes to stop sign thats it.
I can't boot with the similar 8470p EFI Folder editing the config won't help.

I always work with unibeast had never problems with it. I was almost always able to boot the installer!
With my Lenovo Y50-70 np and for my PC with MSI Z370-A-Pro motherboard i had to add specific kext file for it to boot.

There is no helpfull Guide to find at this point i read all of them and used all different EFI Folders the problem is the same stuck at 50% ...

Am i missing some kext or settings in my clover config to boot? Config are default, prekext and updated kext give me the same.

verbose gives me "AppleUsbHostRessources" repeating 5-10 times then stuck there.
Should i use an usb 2.0 stick i thought usb 3.0 is down 2.0 compatible ...


I hope u guys can help me.

 

[Feartech]

Hey Guys ,

HP Elitebook 8560p (i7 2620m) no gpu

I'm not able to boot the installer at all, stuck at 50% loading then Logo goes to stop sign thats it.
I can't boot with the similar 8470p EFI Folder editing the config won't help.

I always work with unibeast had never problems with it. I was almost always able to boot the installer!
With my Lenovo Y50-70 np and for my PC with MSI Z370-A-Pro motherboard i had to add specific kext file for it to boot.

There is no helpfull Guide to find at this point i read all of them and used all different EFI Folders the problem is the same stuck at 50% ...

Am i missing some kext or settings in my clover config to boot? Config are default, prekext and updated kext give me the same.

verbose gives me "AppleUsbHostRessources" repeating 5-10 times then stuck there.
Should i use an usb 2.0 stick i thought usb 3.0 is down 2.0 compatible ...


I hope u guys can help me.

make sure to use a usb2.0 stick