- Joined
- Mar 29, 2011
- Messages
- 130
- Motherboard
- Gigabyte GA-Z490 Vision G
- CPU
- i5-11600k
- Graphics
- RX 580
- Mac
- Mobile Phone
try alcid=7Hi Casey,
I just finished building my son a vision G model, using your EFI Folder for the Vision G, and these instructions. Looks like everything is working except the audio. Not sure what is wrong, but maybe you can shed some light on this. I have attached my EFi folder and my IO Reg report for you to study. Please let me know where I went wrong.
I was hoping that using the instructions and your EFI folder setup, I would not have any problems. Please let me know if you need anything else.
Hardware in build is as follows:
Gigabyte Vision G Z490 Motherboard
Intel I5-10600K Processor
32GB DDR4 Ram running at 3200 MHz
AMD Sapphire Radeon RX 580 8Gb Video Card
250G WD Black m.2 drive
750 Watt Apexgaming modular power supply
Oh, by the way, I also built myself the Vision D model about a year ago using this guide and your EFI folder and it works like a champ, no problems whatsoever. That's why I am puzzled that my son's vision G has no sound. Hopefully you can help and let me know what I did wrong.
Thanks in advance.
Wayne
in boot-args under NVRAM instead of alcid=11
that's what I did in mine to get it to work 11 is not working in vision G.