- Joined
- Feb 16, 2016
- Messages
- 3
- Motherboard
- ASRock z77pro4-m
- CPU
- i5-3570
- Graphics
- Intel HD 2500
- Mac
- Classic Mac
- Mobile Phone
Hello guys!
I'm a newbie in Hackintosh. I have a few questions to community.
Here what I've done:
0. (successfully?) Patched my BIOS fw 2.00 with PMPatch.
1. Installed clean 10.11.3 on ADataSSD and Clover v2.3k r3333
2. Installed Lnx2Mac Realtek RTL81xx Driver
3. Extracted DSDT with AIDA under Windows and fixed some errors and compiled it.
So guys, please, can you guide me where to look, what to read?)
I'm not asking for pre-made solution (but if you have one - it'll be great!), a helpful link would be greatly appreciated.
Thank you very much in advance!
Tech spec below
Sincerely yours,
z0d1ac
_____________________
Here's the list of what I'm using to boot
Attaching config.plist, bios patched rom and DSDT
I'm a newbie in Hackintosh. I have a few questions to community.
Here what I've done:
0. (successfully?) Patched my BIOS fw 2.00 with PMPatch.
1. Installed clean 10.11.3 on ADataSSD and Clover v2.3k r3333
2. Installed Lnx2Mac Realtek RTL81xx Driver
3. Extracted DSDT with AIDA under Windows and fixed some errors and compiled it.
3.1 Applied patch from pjalm.com for MoBo
3.2 Didn't apply patch for HD 2500 Graphics (useless, as I understood)
3.3 Removed string (not the whole block) "\_SB.PCI0.LPCB.SIOW (Arg0)" from DSDT for fixing sleep/wake (I guess it's not working)
Nearly everything works OK, but I have troubles with sleep ("you don't say") and sound.3.2 Didn't apply patch for HD 2500 Graphics (useless, as I understood)
3.3 Removed string (not the whole block) "\_SB.PCI0.LPCB.SIOW (Arg0)" from DSDT for fixing sleep/wake (I guess it's not working)
- Sleep: when I enter sleep mode the screen goes black, cursor stays on its position and coolers are spinning. Maybe it is normal? The system "wakes" fine - if any button pressed desktop returns.
- Sound: tried Multibeast, patching AppleHDA.kext in S\L\E\. I see Intel HDA in Sound Section of Device manager, but still no sound. Audio codec appears to be Realtek ALC892. I believe that something is wrong with my config.plist (the most complicated thing to me)
- Also, there is no reaction to POWER button on my PC when MacOSX is running.
So guys, please, can you guide me where to look, what to read?)
I'm not asking for pre-made solution (but if you have one - it'll be great!), a helpful link would be greatly appreciated.
Thank you very much in advance!
Tech spec below
Sincerely yours,
z0d1ac
_____________________
What works: | What doesn't: |
|
|
Here's the list of what I'm using to boot
Kexts | Drivers |
FakeSMC | DataHubDxe-64.efi FSInject-64.efi OsxAptioFixDrv-64.efi OsxFatBinaryDrv-64.efi PartitionDxe-64.efi VBoxHfs-64.efi |
Attaching config.plist, bios patched rom and DSDT