- Joined
- Aug 8, 2010
- Messages
- 35
- Motherboard
- Lenovo Yoga 730-15IKB - Clover
- CPU
- i7-8550U
- Graphics
- HD 620, 1920x1080
- Mobile Phone
Attach ioreg and config.plist.
This kext is doing more than just injecting EDID. It is also pointing to a custom display override file, and changing IODisplayConnectFlags.
And maybe more... may have to find the source for DisplayMergeNub.
OK, getting somewhere...
Success through Clover custom EDID injection!
Ok, so here is what I did.
Using "DarwinDumper", extract the Display EDID info from laptop into a folder
Use "FixEDID.app" to create the custom EDID from the EDID.bin file. (see previous post)
This will generate three files on desktop.
Open the DisplayVendorID-xxx file "inside" of the folder with same name with "TextEdit.app" and save it with any name.
Using PlistEdit Pro.app open the saved text file and copy the converted EDID info to Clover Custom EDID section.
***Note: you cannot use the edid info from the text file in Clover Configurator.app as is.****
Copy the same DisplayVendorID and DisplayProductIDs integers as hex values (eg) 0x????) to Clover's
VendorID and ProductID also.
Select "Inject EDID" in Clover and reboot.
Now injection is through Clover only...no kext required.
Using Clover_3786
Of course you will NOT install the kext.
Last edited: