- Joined
- Jul 5, 2019
- Messages
- 252
- Motherboard
- Asus Z690 ProArt Creator WiFi
- CPU
- i9-13900K
- Graphics
- RX 6900 XT - Nitro
- Mac
- Mobile Phone
We can use Radeon RX 6600, 6650 (may need device spoofing), 6800, 6900, 6950 (may need device spoofing).@CaseySJ thanks for the answer above.
I still have a 5700xt, I would like to change this card, what would be the best option for z690 with i9 13900k ... that is plug and play with hack?
This is for the z790 ProArt CreatorArt Z690-Creator system? Or a different board?
Oh boy, I hope it's something else. Fingers crossed!I had this problem on my Z390 Designare a couple of months ago. One of my DIMMs was bad. I had an extra set lying around so I was able to swap a new pair of DIMMs and the problem went away.
Please update your Profile Components to reflect your current system.This is for the z790 ProArt Creator
...
I have the ASUS ProArt Z790-CREATOR WIFI motherboard, and I followed the @CaseySJ thread, with some modifications to the EFI. I successfully installed macOS Ventura. The USB4 and Thunderbolt cards are working properly, although there is no Thunderbolt tree-related information.You read my mind!
If I update post 1 for Z790, the implication is that I’m officially supporting it, which is something I cannot adequately do without owning one.
... both XT and non-XT versions, correct?We can use Radeon RX 6600, 6650 (may need device spoofing), 6800, 6900, 6950 (may need device spoofing).
What were the modifications to the EFI. TIA.I have the ASUS ProArt Z790-CREATOR WIFI motherboard, and I followed the @CaseySJ thread, with some modifications to the EFI. I successfully installed macOS Ventura. The USB4 and Thunderbolt cards are working properly, although there is no Thunderbolt tree-related information.
Correct. Plus Radeon Pro W6600 and W6800 if you have the budget, or find an opportunity.... both XT and non-XT versions, correct?
+1, I’m also curious about which modifications you made to the EFI.I have the ASUS ProArt Z790-CREATOR WIFI motherboard, and I followed the @CaseySJ thread, with some modifications to the EFI. I successfully installed macOS Ventura. The USB4 and Thunderbolt cards are working properly, although there is no Thunderbolt tree-related information.
The system in my configuration is still my primary workstation. I’ll change it once the new system is fully functional and I’ve switched over.Please update your Profile Components to reflect your current system.