- Joined
- May 14, 2019
- Messages
- 19
- Motherboard
- Asus deluxe II
- CPU
- i7-5930K
- Graphics
- rx580
Hello! Thank you for this EFI!Hi every one.
Today I manage to install OS X 10,15,4 using OpenCore on my Asus x99-a with i7 5820k Asus strix Vega 56.
I followed the OpenCore vanilla guide for Haswell-e. With some Very Important Exceptions:
1. Don't use DevirtualiseMmio quirk on the boot section of config.plist. This causes a panic before the kernel even loads.
2. Emulate: Needed for spoofing unsupported CPUs and enabling power management on Haswell-E and Boardwell-E
Verify with the terminal command "sysctl machdep.xcpm.mode" if the XCPM mode is active. If so, "sysctl machdep.xcpm.mode" should return "1".
- Haswell E:
- Cpuid1Data: C3060300 00000000 00000000 00000000
- Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000
(This is the equivalent of config.plist "Type" entry in Section "CPU" of Clover Configurator from kpg guide)
3.Need to patch IOPCIFamily (IOPCIFamilyPatch ©PMHeart) on the Kernel section of config.plist.
4. Need to ad npci=0x2000 boot-arg on NVRAM section of config.plist.
4.* For Vega 56 use agdpmod=pikera Boot-args
Post install: Remember to compile your SMBIOS info using GenSMBIOS-master on the platform info section of config.plist And Your prev-lang:kbd NVRAM.
I still need to clean and test a lot, but at the moment I'm very happy with this hack. I never Booted this fast on this build.
Thank you Very Very Much to user Jpevrard for your help, people like you make Hackintosh a great community.
I tried it on my configuration
ASUS Deluxe II
5930
rx580
the system works.
But without bluetooth, wake up and maybe without something else
Could you give me advice that I need to change for my configuration or you have the same problem?