- Joined
- Feb 24, 2013
- Messages
- 2,651
- Motherboard
- N/A
- CPU
- N/A
- Graphics
- N/A
- Mac
- Mobile Phone
Hey guys, may have finally solved the issue with SAGE/10G (It may seem minor but for me it's big).
As you know, SAGE/10G has 1 onboard USB3.0 connector and one USB-C 3.1Gen2 connector.
USB-C 3.1Gen2 > USB3.0 adapter did not work at all.
Fresco Logic PCIe USB cards worked, but they were buggy (caused stutters and sudden system freezes).
So I now have BT connected to the onboard USB3.0 (with an adapter) and that works great.
Then I added this SilverStone Technology USB 3.1 Gen2 PCIe Card Internal 19Pin Connector ECU04-E-USA card for the front 2 ports (which are USB3.0). Since USB 3.1 is backwards compatible with USB 3.0/2.0, this card is perfect for front 2 ports (although it requires a SATA Power connector). And it has no additional ports so you won't have any conflicts so it's dedicated just for the front 2 ports. Speeds are great and no glitches or stability issues anywhere. However you can't use this card with Bluetooth USB connector, it just won't work (Probably has to do with the fact that it's USB3.1 chipset and we are feeding it USB2.0 protocol through adapters).
Since this is an ASMedia chip, it's pretty much universally supported both in macOS and Windows with no drivers needed whatsoever.
Anywho, this solves the issue for me with SAGE/10G.
Will report if I find anything different.
As you know, SAGE/10G has 1 onboard USB3.0 connector and one USB-C 3.1Gen2 connector.
USB-C 3.1Gen2 > USB3.0 adapter did not work at all.
Fresco Logic PCIe USB cards worked, but they were buggy (caused stutters and sudden system freezes).
So I now have BT connected to the onboard USB3.0 (with an adapter) and that works great.
Then I added this SilverStone Technology USB 3.1 Gen2 PCIe Card Internal 19Pin Connector ECU04-E-USA card for the front 2 ports (which are USB3.0). Since USB 3.1 is backwards compatible with USB 3.0/2.0, this card is perfect for front 2 ports (although it requires a SATA Power connector). And it has no additional ports so you won't have any conflicts so it's dedicated just for the front 2 ports. Speeds are great and no glitches or stability issues anywhere. However you can't use this card with Bluetooth USB connector, it just won't work (Probably has to do with the fact that it's USB3.1 chipset and we are feeding it USB2.0 protocol through adapters).
Since this is an ASMedia chip, it's pretty much universally supported both in macOS and Windows with no drivers needed whatsoever.
Anywho, this solves the issue for me with SAGE/10G.
Will report if I find anything different.
Last edited: