Asus X299 - Support

[djlild7hina]

Hello, the MSRlock is disabled in the Bios, I am currently testing three different EFIs with the Bios 2002, 3006 and 3105, at the moment I have tried in 2002 with all the EFIs and none start Catalina or Mojave, I am not using AWAC Or RTC0 because, as I have read, perhaps I am wrong, my motherboard does not need a clock change, the Prime Deluxe V2 does not. This afternoon I will test the 3006 and 3105 with the three EFI's. If I don't get results, I'll buy a compatible motherboard. For this processor (10900x). Is the Asus Prime Deluxe x299 v2 or the Asus SAGE / 10 better? Is there a configuration difference between the Asus SAGE and the SAGE 10? Is it only the Network at 10Gb / s? I have found a distributor in Spain who sells me a SAGE for € 398 (new)
Thanks again.

Let's see if we can get it working before you buy a new motherboard. I believe 3006 and 3105 require a clock change. So it doesn't work on 3105 with SSDT-AWAC? Let's try SSDT-AWAC first on 3105. After we can mess with SSDT-RTC0

 

[WoodCabin]

Thanks @djlild7hina How many different clock change files are there? Awac? RTC0? some more? so I am testing them one by one with the different configurations

 

[djlild7hina]

Thanks @djlild7hina How many different clock change files are there? Awac? RTC0? some more, so I am testing them one by one with the different configurations

It's either AWAC or RTC0. RTC0 replaces AWAC. So your SSDTs (ordered in config.plist) should look like this:
BIOS 2002:
1. SSDT-SBUS-MCHC.aml
2. SSDT-PLUG.aml
3. SSDT-EC-USBX.aml

BIOS 3006 (patched), BIOS 3105 (unpatched)
1. SSDT-SBUS-MCHC.aml
2. SSDT-PLUG.aml
3. SSDT-EC-USBX.aml
4. SSDT-AWAC.aml

 

[WoodCabin]

In these minutes I have collected information from the system, I am in bios 3006 patched (from your Github repository) Mojave starts with AWAC and with RTC0, Catalina with none. I am using Clover, v5103, I feel like using OpenCore but configuring my system with OpenCore is too complicated for me, I want to do it, this holidays I want to dedicate time to OpenCore. I attach the EFI, IOReg and the two .aml that I use for the tests, I also attach a screenshot when I try to boot in catalina I am going to look for the SSDT's that you have indicated in the previous message and I am going to try, the IOReg is saved with AWAC loaded, thanks again.

 

[djlild7hina]

In these minutes I have collected information from the system, I am in bios 3006 patched (from your Github repository) Mojave starts with AWAC and with RTC0, Catalina with none. I am using Clover, v5103, I feel like using OpenCore but configuring my system with OpenCore is too complicated for me, I want to do it, this holidays I want to dedicate time to OpenCore. I attach the EFI, IOReg and the two .aml that I use for the tests, I also attach a screenshot when I try to boot in catalina I am going to look for the SSDT's that you have indicated in the previous message and I am going to try, the IOReg is saved with AWAC loaded, thanks again.

Ah... you're using Clover. I'm not sure if that makes a difference. Will have to refer to someone else on clover to see if they can help.

 

[WoodCabin]

Ok, I think I'm going to start taking time to learn OpenCore, thanks.

 

[djlild7hina]

Ok, I think I'm going to start taking time to learn OpenCore, thanks.

Here are some helpful links:
Converting from Clover

dortania/OpenCore-Install-Guide

Repo for the OpenCore Install Guide. Contribute to dortania/OpenCore-Install-Guide development by creating an account on GitHub.

github.com

and the first page in the Open Core support forum has my github.

X299 - Open Core support

This thread is meant to be support/discussion for users that are experimenting/using OpenCore. Users that are using Clover please refer to the original X299 support thread. NOTE: This post will no longer be updated, please refer to new X299 Support thread and this post

www.tonymacx86.com

 

[yapan4]

@WoodCabin
While you're studying Open Core, you can still try this Clover EFI folder

 

[WoodCabin]

@WoodCabin
While you're studying Open Core, you can still try this Clover EFI folder

Thank you, tomorrow I will try it, regards.

 

[chessa]

@djlild7hina

Hi,
i have your same mobo, i9-7980XE, Radeon VII, Gigabyte Titan Ridge but with the modified bios 3101 i can't be stable due to some wrong bios setting which at every start forces me to press F1 for stability problems. With the same bios settings, however, i have no stability problems with the 2002 version.
You can publish your bios 3101 settings in detail?
Many thanks for support.